Discrimination of active palladium sites in catalytic liquid-phase oxidation of benzyl alcohol

Knowledge of the structure of active sites is a prerequisite for the rational design of solid catalysts. Using site-selective blocking by CO and isotope labeling combined with in situ attenuated total reflection infrared (ATR-IR) spectroscopy, we were able to discriminate the different sites involved in the liquid-phase oxidation of benzyl alcohol on Pd/Al(2)O(3). The main reaction, that is, the oxidative dehydrogenation of the alcohol to the corresponding aldehyde, showed only little dependence on structure and occurred on all exposed Pd faces, whereas the undesired product decarbonylation occurred preferentially on hollow sites on (111) Pd faces. This explains why specific blocking of the latter sites, as realized in the industrially used Pd-Bi/Al(2)O(3) catalysts, leads to improved catalytic performance.     

Investigation of the influence of spacer arm on the structural evolution of affinity ligands supported on agarose

The influence of the spacer arm on the interaction between agarose and a supported ligand was investigated through molecular dynamics for a combination of several spacers. The spacers differ for degree of hydrophobicity, length, and chemical composition, which was varied through insertion of thio, ether, and CH(2) groups. Agarose was modeled through a modified Glycam force field, whose parameters were determined through ab initio calculations. The structural model of agarose used for the calculations was obtained through MD studies of the conformational evolution of several agarose single and double helixes. The simulations showed that a modification of the spacer properties could determine a change of the stable structure of the ligand with respect to the support. In particular, if the spacer is hydrophilic and rigid, the favored structure is with extended spacer and solvated ligand. Either increasing the spacer length, and thus its flexibility, or decreasing its solvation free energy, which corresponds to diminishing its affinity for water, rapidly leads to a conformational change in which the ligand adsorbs on agarose. Interestingly, we found that if the spacer is long and hydrophilic, a third metastable structure, in which the spacer is sandwiched between the ligand and agarose, is possible. Simulations of several ligands adsorbed on neighboring sites on agarose showed that if the support is not held fixed through restraints, the interaction force between vicinal ligands is sufficient to determine a major conformational change of the system.     

Opening the Pandora's jar of molecule‐to‐material conversion in chemical vapor deposition: Insights from theory

First‐principles modeling can be a powerful tool for the understanding and optimization of bottom‐up processes for nanomaterials fabrication, such as chemical vapor deposition (CVD), a key technology for the development of advanced systems and devices. Molecule‐to‐material conversion by CVD involves complex chemical phenomena, which are often obscure and still largely unexplored. A proper modeling would require high level of accuracy, large sized models and should include both temperature effects and statistical sampling of reactive events. By presenting a few selected examples, this perspective surveys such problems and discusses currently available approaches for their solution. Possible strategies for future advances in the field are also highlighted. © 2013 Wiley Periodicals, Inc.     

An artificial ionophore based on a polyhydroxylated steroid dimer

The Na+ transporting properties of the first member of a new class of artificial ionophores, based on a C2-symmetric polyhydroxylated steroid dimer, are described.     

Phenol photonitration

This paper presents some new data on nitrophenol formation from phenol under illumination, and reviews the studies performed on phenol photonitration, from its discovery in 1988 to the very recent elucidation of its reaction pathway by the authors. Recent experimental results account for the pH effect on phenol photonitration. The nitrogen sources so far investigated are nitrate and nitrite, which undergo photolysis upon absorption of near-UV light. These studies have given a relevant information on the role of both nitrate and nitrite as environmental factors. Such processes can take place both in natural waters and in atmospheric hydrometeors.     

Regiocontrolled synthesis of enantiopure 3,3'-thiosubstituted biphenyls

Sulfenylation of 6,6'-dimethoxy-2,2'-dihydroxybiphenyl, used as a racemic mixture and single enantiomers, by phthalimidesulfenyl chloride afforded the corresponding 3,3'-N,N'-dithiophthalimide with complete regioselectivity. Simple manipulations of the latter compound allowed access to the corresponding bis-thiol or o-thioquinone as useful intermediates for the synthesis of new sulfur-containing open-chain and macrocyclic C(2) enantiopure ligands. The application of this methodology to the preparation of a biphenyl bearing two cysteine units as potential HIV-1 protease inhibitor is also described.     

Versatile Bisethynyl[60]fulleropyrrolidine Scaffolds for Mimicking Artificial Light‐Harvesting Photoreaction Centers

Fullerene‐based tetrads, triads, and dyads are presented in which [60]fulleropyrrolidine synthons are linked to an oligo(p‐phenyleneethynylene) antenna at the nitrogen atom and to electron‐donor phenothiazine (PTZ) and/or ferrocene (Fc) moieties at the α carbon of the pyrrolidine cycle through an acetylene spacer. Cyclic voltammetry and UV/ Vis absorption spectra evidence negligible ground‐state electronic interactions among the subunits. By contrast, strong excited‐state interactions are detected upon selective light irradiation of the antenna (UV) or of the fullerene scaffold (Vis). When only PTZ is present as electron donor, photoinduced electron transfer to the fullerene unit is unambiguously detected in benzonitrile, but this is not the case when Fc is part of the multicomponent system. These results suggest that Fc is a formidable energy transfer quencher and caution should be used in choosing it as electron donor to promote efficient charge separation in multicomponent arrays.     

Synthesis, structure, and spectroscopic characterization of [H(8-n)Rh22(CO)35](n-) (n = 4, 5) and [H2Rh13(CO)24{Cu(MeCN)}2](-) clusters: assessment of CV and DPV as techniques to circumstantiate the presence of elusive hydride atoms

The previously ill-characterized [H(x)Rh(22)(CO)(35)](4-/5-) carbonyl cluster has been obtained as a byproduct of the synthesis of [H(3)Rh(13)(CO)(24)](2-) and effectively separated by metathesis of their sodium salts with [NEt(4)]Cl. Although the yields are modest and never exceed 10-15% (based on Rh), this procedure affords spectroscopically pure [H(3)Rh(22)(CO)(35)](5-) anion. Formation of the latter in mixture with other Rh clusters was also observed by electrospray ionization-mass spectrometry (ESI-MS) in the oxidation of [H(2)Rh(13)(CO)(24)](3-) with Cu(2+) salts. The recovery of further amounts of [H(3)Rh(22)(CO)(35)](5-) was hampered by too similar solubility of the salts composing the mixture. Conversely, the reaction in CH(3)CN of [H(2)Rh(13)(CO)(24)](3-) with [Cu(MeCN)(4)](+)[BF(4)](-) leads to the [H(2)Rh(13)(CO)(24){Cu(MeCN)}(2)](-) bimetallic cluster. The X-ray crystal structures of [H(4)Rh(22)(CO)(35)](4-), [H(3)Rh(22)(CO)(35)](5-), and [H(2)Rh(13)(CO)(24){Cu(MeCN)}(2)](-) are reported. From a formal point of view, the metal frame of the former two species can be derived by interpenetration along two orthogonal axes of two moieties displaying the structure of the latter. The availability of [H(8-n)Rh(22)(CO)(35)](n-) salts prompted their detailed chemical, spectroscopic, and electrochemical characterization. The presence of hydride atoms has been directly proved both by ESI-MS and (1)H NMR. Moreover, both [H(4)Rh(22)(CO)(35)](4-) and [H(3)Rh(22)(CO)(35)](5-) undergo distinctive electrochemically reversible redox changes. This allows to assess electrochemical studies as indisputable though circumstantial evidence of the presence of (1)H NMR-silent hydride atoms in isostructural anions of different charge.     

A general copper powder-catalyzed Ullmann-type reaction of 3-halo-4(1H)-quinolones with various nitrogen-containing nucleophiles

3-(N-Substituted) 4(1H)-quinolinones were synthesized using the copper-catalyzed Ullmann C-N bond forming strategy in moderate to quantitative yields. Starting from 3-halo-4(1H)-quinolones, various nucleophiles including amides, lactams, sulfonamides and NH-containing azoles have been used successfully. In all cases, the reactions take place rapidly in toluene and proceed by using copper powder as a catalyst, DMEDA as a ligand and K(2)CO(3) as a base. In addition, other related heterocycles such as 3-bromoquinolin-2(1H)-ones, 3-bromocoumarin, and 3,5-dibromo-2-pyridone show good to very high reactivity with various nucleophiles under our Cu/DMEDA catalyst system.     

Lattice model of glasses

Glass-forming liquids have been extensively studied in recent decades, but there is still no theory that fully describes these systems, and the diversity of treatments is in itself a barrier to understanding. Here we introduce a new simple model that (possessing both liquid-crystal and glass transition) unifies different approaches, producing most of the phenomena associated with real glasses, without loss of the simplicity that theorists require. Within the model we calculate energy relaxation, nonexponential slowing phenomena, the Kauzmann temperature, and other classical signatures. Moreover, the model reproduces a subdiffusive exponent observed in experiments of dense systems. The simplicity of the model allows us to identify the microscopic origin of glassification, leaving open the possibility for theorists to make further progress.