Validation of a thermal decomposition mechanism of formaldehyde by detection of CH2O and HCO behind shock waves

The thermal decomposition of formaldehyde was investigated behind shock waves at temperatures between 1675 and 2080 K. Quantitative concentration time profiles of formaldehyde and formyl radicals were measured by means of sensitive 174 nm VUV absorption (CH₂O) and 614 nm FM spectroscopy (HCO), respectively. The rate constant of the radical forming channel (1a), CH₂O + M → HCO + H + M, of the unimolecular decomposition of formaldehyde in argon was measured at temperatures from 1675 to 2080 K at an average total pressure of 1.2 bar, k_1a = 5.0 × 10¹⁵ exp(‐308 kJ mol^?1/RT) cm³ mol^?1 s^?1. The pressure dependence, the rate of the competing molecular channel (1b), CH₂O + M → H₂ + CO + M, and the branching fraction β = k_1a/(kA_1a + k_1b) was characterized by a two‐channel RRKM/master equation analysis. With channel (1b) being the main channel at low pressures, the branching fraction was found to switch from channel (1b) to channel (1a) at moderate pressures of 1–50 bar. Taking advantage of the results of two preceding publications, a decomposition mechanism with six reactions is recommended, which was validated by measured formyl radical profiles and numerous literature experimental observations. The mechanism is capable of a reliable prediction of almost all formaldehyde pyrolysis literature data, including CH₂O, CO, and H atom measurements at temperatures of 1200–3200 K, with mixtures of 7 ppm to 5% formaldehyde, and pressures up to 15 bar. Some evidence was found for a self‐reaction of two CH₂O molecules. At high initial CH₂O mole fractions the reverse of reaction (6), CH₂OH + HCO ? CH₂O + CH₂O becomes noticeable. The rate of the forward reaction was roughly measured to be k₆ = 1.5 × 10¹³ cm³ mol^?1 s^?1. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 157–169 2004     

Total synthesis of the marine cytotoxic caulibugulones A-D

We report the first total synthesis of the cytotoxic marine alkaloids caulibugulone A-D. This synthesis confirmed the assigned structures and provided sufficient material for further biological testing.     

PARTIAL VERSUS GENERAL STORAGE POLICY: COMMODITIES AND RESOURCES

This paper examines joint storage considerations when both commodities and resources can be stored, e.g., grain and water for irrigation. Results suggest that when separate agencies control public resource and commodity storage, suboptimal storage rules occur unless (i) each agency is sensitive to the policies of the other, (ii) commodity inventories are adjusted in response to prices, and (iii) resource inventories are adjusted in response to both commodity demand and resource supply conditions. For example, the common case where water storage depends on weather and reservoir conditions alone is not sufficiently general. The results imply that water management agencies that tend to be dominated by engineers and hydrological considerations need to incorporate economic considerations into decision processes.     

Counterion and solvent effects on the dilute solution viscosity of polystyrene ionomers

We present an analysis of data on the intrinsic viscosity [η] of sulfo-polystyrene ionomers in several solvents for a variety of sulfonation levels and counterions. For solvents of low dielectric constant, 2 < ε < 18, [η] decreases from the base polymer value [η]₀ with increasing substitution level. This behavior was attributed to intramolecular association of ionic dipoles. The ratio [η]/[η]₀ was found to depend on a single reduced variable α_Aα_Sx, where x is the fractional substitution, α_A depends only on the counterion, and α_S ∝ ε^?1 depends only on the solvent. For solvents of high dielectric constant, 36 < ε < 47, [η] increases approximately as x³, and counterion effects are small. This behavior was attributed to ionic dissociation, giving rise to a polyelectrolyte effect. Implications of the low ε results are discussed in relation to association-induced gelation behavior and possible generalizations of the reduced variables approach.     

Lightly crosslinked,mesomorphic networks obtained through the reaction of dimeric,liquid‐crystalline epoxy–imine monomers and heptanedioic acid

We reacted various dimeric, liquid‐crystalline epoxy–imine monomers, differing in the length of the central aliphatic spacer or the dipolar moments, with heptanedioic acid. The resulting systems showed a liquid‐crystalline phase in some cases, depending on the dimer and on the reaction conditions. The systems were characterized with respect to their mesomorphic properties and then were submitted to dynamic mechanical thermal analysis in both fixed‐frequency and frequency‐sweep modes in the shear sandwich configuration. The arrangement in the liquid‐crystalline phase seemed to be mainly affected both by the polarization of the mesogen and by the reaction temperature, which favored the liquid‐crystalline arrangement when it was lying in the range of stability of the dimer mesophase. In agreement with other recent literature data, dynamic mechanical thermal analysis results suggested that the presence of the mesogen directly incorporated into the main chain increased the lifetimes of the elastic modes both in the isotropic phase and in the liquid‐crystalline phase with respect to side‐chain liquid‐crystalline elastomers and that the time–temperature superposition principle did not hold through the liquid‐crystalline‐to‐isotropic transition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6270–6286, 2006     

Control of the conjugation length and solubility in electroluminescent polymers

A new type of cyclolinear polymer, poly(phenylene vinylene‐alt‐cyclotriphosphazene), was synthesized through Heck‐type coupling reactions to produce π‐conjugated macromolecules with excellent solubility and precise electronic control of the band‐gap energy. This synthesis method is capable of producing well‐defined alternating polymers. The method is highly adaptable and can be readily used for other chromophore systems. The resulting polymers were also capable of accommodating a wide variety of substituents on the cyclophosphazene rings with minimal effect on the electronic properties. The band gap and electron affinities of the polymer were varied through the manipulation of the π‐conjugated unit located between the insulating phosphazene rings. Each chromophore matched the intended conjugation length consistently throughout the macromolecules. The polymers were good film formers because of the chosen substituents on the phosphazene rings. The absorbance of the polymers indicated minimal spectral shift from the monomer absorbance. This suggested an effective insulation of each chromophore unit from its neighbors by the phosphazene rings. Solution photoluminescence efficiencies were found to be up to 44.1%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 69–76, 2006     

Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability

The life of proton exchange membrane fuel cells (PEMFC) is currently limited by the mechanical endurance of polymer electrolyte membranes and membrane electrode assemblies (MEAs). In this paper, the authors report recent experimental and modeling work toward understanding the mechanisms of delayed mechanical failures of polymer electrolyte membranes and MEAs under relevant PEMFC operating conditions. Mechanical breach of membranes/MEAs in the form of pinholes and tears has been frequently observed after long‐term or accelerated testing of PEMFC cells/stacks. Catastrophic failure of cell/stack due to rapid gas crossover shortly follows the mechanical breach. Ex situ mechanical characterizations were performed on MEAs after being subjected to the accelerated chemical aging and relative humidity (RH) cycling tests. The results showed significant reduction of MEA ductility manifested as drastically reduced strain‐to‐failure of the chemically aged and RH‐cycled MEAs. Postmortem analysis revealed the formation and growth of mechanical defects such as cracks and crazing in the membranes and MEAs. A finite element model was used to estimate stress/strain states of an edge‐constrained MEA under rapid RH variations. Damage metrics for accelerated testing and life prediction of PEMFCs are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2346–2357, 2006