Potentiometric measurements of the first hydrolysis quotient of magnesium(II) to 250°C and 5 molal ionic strength (NaCl)

The first molal hydrolysis quotient, Q_1.1, of Mg²⁺ was measured potentiometrically from 1 to 250°C at ionic strengths of 0.11, 0.31, 1.01, and 5.0 mol-kg^-1 in an aqueous NaCl medium using a hydrogen-electrode, concentration cell. Only hydrolysis of the first four percent of the magnesium in solution could be followed before precipitation of brucite, Mg(OH)₂(cr), occurred. The log Q_1.1 values were fitted as a function of temperature and ionic strength using four adjustable parameters. The resulting constants are compared with the limited existing low temperature data. At infinite dilution and 25°C the following quantities are reported: logK _1.1 = -11.68±0.05, †H_so = 70.1±1.2 kJ-mol^-1, †S^o = 11±4 J-K^-1-mol^-1, and †C _p ^o = 0 J-K^-1-mor^-1. At each ionic strength, including the values extrapolated to infinite dilution, the heat capacity change for the hydrolysis reaction was zero,i.e., logQ _1.1 was found to be a linear function of the reciprocal temperature in Kelvin, at least over the measured range of l-250°C. The hydrolysis constants at infinite dilution were modeled to 550°C and two kbar pressure with a function incorporating solvent density using published results obtained at these extreme conditions.     

A new method for the direct calculation of resonance parameters with application to the quasibound states of the H2X1Σ g + system

A new method for the direct calculation of resonance parameters is presented. It is based upon searching for poles of the scattering matrix at complex energies. This search is expedited by the use of analytic derivatives of the scattering matrix with respect to the total energy. This procedure is applied initially to a single channel problem, but is generalizable to more complicated systems. Using the most accurate available potential energy data, we calculate resonance parameters for all of the physically important quasibound states of the ground electronic state of the hydrogen molecule. Corrections to the Born-Oppenheimer potential are included and assessed. The new method has no difficulty locating resonances with widths greater than about 1×10^–7 cm^–1. It is easier to find narrow resonances by monitoring the dependence of the imaginary part of the reactance matrix on the real part of a complex energy than to monitor the dependence of the eigenphase sum on energy at real energies.     

Synthesis of pyridone and pyridine rings by [4+2] hetero-cyclocondensation

Substituted pyridones and pyridines have been synthesised efficiently by employing iminium salt as a key precursor. These compounds were prepared using tandem [4+2] cycloaddition/deamination between azabutadiene and dienophiles.     

Rapid biomass analysis

New, rapid, and inexpensive methods that monitor the chemical composition of corn stover and corn stover-derived samples are a key element to enabling the commercialization of processes that convert stover to fuels and chemicals. These new techniques combine near infrared (NIR) spectroscopy and projection to latent structures (PLS) multivariate analysis to allow the compositional analysis of hundreds of samples in 1 d at a cost of about $10 each. The new NIR/PLS rapid analysis methods can also be used to support a variety of research projects that would have been too costly to pursue by traditional methods.     

Diode or tunnel-diode characteristics? Resolving the catalytic consequences of proton coupled electron transfer in a multi-centered oxidoreductase

Protein film voltammetry has been employed to define multiple catalytic consequences of proton coupled electron transfer (PCET) in a cytochrome c nitrite reductase. Current-potential profiles reflecting the steady-state rate of nitrite-limited reduction have been defined from pH 4 to 8. Lowering the electrode potential at pH 8 causes the catalytic current to increase and then decrease before it takes a value independent of any further lowering of electrode potential. By comparison, at pH 4, catalysis is initiated at more positive electrode potentials in an approximately sigmoidal fashion with no attenuation of the catalytic rate evident at more negative electrode potentials. The results show that activity is turned on by the coupled transfer of two electrons and one proton to the enzyme. The decreased rate of catalysis at lower electrode potentials under more alkaline conditions shows that this rate attenuation occurs only when reduction is not coupled to compensating protonation(s) of the enzyme. Sites within the enzyme whose reduction and/or protonation may contribute to the definition of these activities are discussed.     

Synthesis and characterization of polymers produced by horseradish peroxidase in dioxane

Polymers were synthesized from substituted phenolic and aromatic amine compounds with hydrogen peroxide as the source of an oxidizing agent and horseradish peroxidase enzyme as the catalyst. The polymerization reaction was carried out in a monophasic organic solvent with small amounts of water at room temperature. Conditions for the synthesis of polymers with respect to reaction time and yield were studied with a number of monomers at different concentrations and in solvents with different buffers with pH range of 5.0–7.5. Physical and chemical properties of these homo-and copolymers were determined with respect to melting point, solubility, elemental analysis, molecular weight distribution, infrared absorption (including FTIR), solid-state ¹³C nuclear magnetic resonance, thermal gravimetric analysis, and differential scanning calorimetry. The enzyme catalyzed reactions produced polymers of molecular weight greater than 400,000 which were further fractionated by differential solubility in solvent mixtures and the molecular weight distribution of the polymer fractions were determined. In general, the polymers synthesized have low solubilities, high melting points, and some degree of branching.     

Site-to-site peptide transport on a molecular platform using a small-molecule robotic arm

Peptides attached to a cysteine hydrazide ‘transporter module’ are transported selectively in either direction between two chemically similar sites on a molecular platform, enabled by the discovery of new operating methods for a molecular transporter that functions through ratcheting. Substrate repositioning is achieved using a small-molecule robotic arm controlled by a protonation-mediated rotary switch and attachment/release dynamic covalent chemistry. A polar solvent mixtures were found to favour Z to E isomerization of the doubly-protonated switch, transporting cargo in one direction (arbitrarily defined as ‘forward’) in up to 85% yield, while polar solvent mixtures were unexpectedly found to favour E to Z isomerization enabling transport in the reverse (‘backward’) direction in >98% yield. Transport of the substrates proceeded in a matter of hours (compared to 6 days even for simple cargoes with the original system) without the peptides at any time dissociating from the machine nor exchanging with others in the bulk. Under the new operating conditions, key intermediates of the switch are sufficiently stabilized within the macrocycle formed between switch, arm, substrate and platform that they can be identified and structurally characterized by ¹H NMR. The size of the peptide cargo has no significant effect on the rate or efficiency of transport in either direction. The new operating conditions allow detailed physical organic chemistry of the ratcheted transport mechanism to be uncovered, improve efficiency, and enable the transport of more complex cargoes than was previously possible.

Peptides are transported in either direction between chemically similar sites on a molecular platform, substrate repositioning is achieved using a cysteine hydrazide transporter module and a small-molecule robotic arm controlled by a rotary switch.     

Backbonding contributions to small molecule chemisorption in a metal–organic framework with open copper(i) centers

Metal–organic frameworks are promising materials for applications such as gas capture, separation, and storage, due to their ability to selectively adsorb small molecules. The metal–organic framework Cu^I-MFU-4l, which contains coordinatively unsaturated copper(i) centers, can engage in backbonding interactions with various small molecule guests, motivating the design of frameworks that engage in backbonding and other electronic interactions for highly efficient and selective adsorption. Here, we examine several gases expected to bind to the open copper(i) sites in Cu^I-MFU-4l via different electronic interactions, including σ-donation, π-backbonding, and formal electron transfer. We show that in situ Cu L-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy can elucidate π-backbonding by directly probing excitations to unoccupied backbonding orbitals with Cu d-character, even for gases that participate in other dominant interactions, such as ligand-to-metal σ-donation. First-principles calculations based on density functional theory and time-dependent density functional theory additionally reveal the backbonding molecular orbitals associated with these spectroscopic transitions. The energies of the transitions correlate with the energy levels of the isolated small molecule adsorbates, and the transition intensities are proportional to the binding energies of the guest molecules within Cu^I-MFU-4l. By elucidating the molecular and electronic structure origins of backbonding interactions between electron rich metal centers in metal–organic frameworks and small molecule guests, it is possible to develop guidelines for further molecular-level design of solid-state adsorbents for energy-efficient separations of relevance to industry.

In situ near edge X-ray absorption fine structure spectroscopy directly probes unoccupied states associated with backbonding interactions between the open metal site in a metal–organic framework and various small molecule guests.     

One-pot sequences of reactions with sol-gel entrapped opposing reagents: an enzyme and metal-complex catalysts

We extend our sol-gel methodology of one-pot sequences of reactions with opposing reagents to an enzyme/metal-complex pair. Sol-gel entrapped lipase and sol-gel entrapped RhCl[P(C(6)H(5))(3)](3) or Rh(2)Co(2)(CO)(12) were used for one-pot esterification and C-C double bond hydrogenation reactions, leading to saturated esters in good yields. When only the enzyme is entrapped, the homogeneous catalysts quench its activity and poison it. Thus, when 10-undecenoic acid and 1-pentanol were subjected in one pot to the entrapped lipase and to homogeneously dissolved RhCl[P(C(6)H(5))(3)](3) under hydrogen pressure, only 7% of the saturated 1-pentyl undecanoate was obtained. The yield jumped 6.5-fold when both the enzyme and the catalyst were immobilized separately in silica sol-gel matrixes. Similar one-pot esterifications and hydrogenations by sol-gel entrapped lipase and heterogenized rhodium complexes were carried out successfully with the saturated nonoic, undecanoic, and lauric acids together with several saturated and unsaturated alcohols. The use of (S)-(-)-2-methylbutanol afforded an optically pure ester. The heterogenized lipase is capable of inducing asymmetry during esterification with a prochiral alcohol. Both the entrapped lipase and the immobilized rhodium catalysts can be recovered simply by filtration and recycled in further runs without loss of catalytic activity.     

Solid-phase synthesis of imidazo[4,5-b]pyridin-2-ones and related urea derivatives by cyclative cleavage of a carbamate linkage

A solid-phase synthesis of substituted cyclic urea derivatives as potential heterocyclic library scaffolds is described. 2-Amino-3-nitropyridine is attached to Wang resin via a carbamate linkage. Reduction of the nitro group was achieved with SnCl(2).2H(2)O. Reductive alkylation with a range of substituted benzaldehydes followed by cyclative cleavage afforded a small library of 3-substituted imidazo[4,5-b]pyridine-2-ones in 33-45% yield and 59-88% purity. Subsequently, this methodology was applied to the synthesis of 3-substituted imidazo[4,5-f]quinolin-2-ones.