Ionic liquids in vacuo; solution-phase X-ray photoelectron spectroscopy

The in situ monitoring of catalysis in Room Temperature Ionic Liquids (RTILs) is fundamental to the understanding of catalytic processes and the role of RTILs in catalytic turnover; we describe how XPS can be used to give information on both pure RTILs and catalytically-active RTIL-based solutions.     

Artificial polypeptide scaffold for protein immobilization

An artificial polypeptide scaffold composed of surface anchor and protein capture domains was designed and expressed in vivo. By using a mutant E. coli phenylalanyl-tRNA synthetase, the photoreactive amino acid para-azidophenylalanine was incorporated into the surface anchor domain. Octyltrichlorosilane-treated surfaces were functionalized with this polypeptide by spin coating and photocrosslinking. The resulting protein films were shown to immobilize recombinant proteins through association of coiled coil heterodimer.     

Subphthalocyanines: tuneable molecular scaffolds for intramolecular electron and energy transfer processes

A series of four subphthalocyanine-C(60) fullerene dyads have been prepared through axial functionalization of the macrocycle with m-hydroxybenzaldehyde and a subsequent dipolar cycloaddition reaction. The subphthalocyanine moiety has been peripherally functionalized with substituents of different electronic character, namely fluorine or iodine atoms and ether or amino groups, thus reaching a control over its electron-donating properties. This is evidenced in cyclic voltammetry experiments by a progressive shift to lower potentials, by ca. 200 mV, of the first oxidation event of the SubPc unit in the dyads. As a consequence, the energy level of the SubPc(*)(+)-C(60)(*)(-) charge-transfer state may be tuned so as to compete with energy transfer deactivation pathways upon selective excitation of the SubPc component. For instance, excitation of those systems where the level of the radical pair lies high in energy triggers a sequence of exergonic photophysical events that comprise (i) nearly quantitative singlet-singlet energy transfer to the C(60) moiety, (ii) fullerene intersystem crossing, and (iii) triplet-triplet energy transfer back to the SubPc. On the contrary, the stabilization of the SubPc(*)(+)-C(60)(*)(-) radical pair state by increasing the polarity of the medium or by lowering the donor-acceptor redox gap causes charge transfer to dominate. In the case of 1c in benzonitrile, the thus formed radical pair has a lifetime of 0.65 ns and decays via the energetically lower lying triplet excited state. Further stabilization is achieved for dyad 1d, whose charge-transfer state would lie now below both triplets. The radical pair lifetime consequently increases in more than 2 orders of magnitude with respect to 1c and presents a significant stabilization in less polar solvents, revealing a low reorganization energy for this kind of SubPc-C(60) systems.     

Novel porphyrin-fullerene assemblies: from rotaxanes to catenanes

[reaction: see text] Titration of porphyrin-fullerene rotaxanes with DABCO or 4,4'-bipyridine led to photo- and redoxactive catenanic architectures, which upon photoexcitation undergo a sequence of short-range energy and electron transfer events to give a long-lived charge-separated radical-pair state.     

Molecular imprinting made easy

A simple method of molecular imprinting is presented that uses a single cross-linking monomer N,O-bismethacryloyl ethanolamine (NOBE) along with template, initiator, and solvent. This formulation eliminates the need for additional functional monomers and empirical optimization of relative ratios of functional monomers, cross-linkers, and template. In fact, utilization of NOBE alone often provides molecularly imprinted polymers (MIPs) with higher performance than MIPs incorporating functional monomer (e.g., methacrylic acid).     

Synthesis and characterization of thermoplastic polyesters and polyamides from sebacyl bisketene

Sebacyl bisketene was generated in solution at ?78°C. Copolymerization in solution at 0°C with the secondary diamines, piperazine and N,N′dimethyl-1,6-hexamethylenediamine, yielded the polyamides poly(1,4-piperazylsebacyl) and poly[(methylimino)hexamethylene(methylimino)sebacyl], respectively. The polyamides were obtained in yields of 50–90%. The former had a glass transition temperature (T_g) at 30°C and a melting temperature at 165°C, whereas the latter had only a T_g at ?15°C. The polymers were insoluble in the usual polyamide solvents. Copolymerization with the diol bisphenol A yielded poly(oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxysebacyl). The polyester was obtained in yields up to 99%. Gel permeation chromatography (GPC) determinations showed molecular weights up to 50,000 when acetone was the reaction solvent but only 12,000 when tetrahydrofuran (THF) was the reaction solvent; the T_g for the polyester varied with the molecular weight with a maximum at 15°C. Tensile properties were obtained for the polyesters with molecular weights greater than 35,000.     

Use of monomer fraction data in the parametrization of association theories

Association theories such as the CPA (cubic-plus-association), NRHB (non-random hydrogen bonding) equations of state and the various variants of SAFT (statistical associating fluid theory) have been extensively applied to phase equilibrium calculations. Such models can also be used for estimating the monomer fraction of hydrogen bonding compounds and their mixtures. Monomer fraction data are obtained from spectroscopic measurements and they are available for a few compounds such as pure water and alcohols as well as for some alcohol–alkane and similar mixtures. These data are useful for an understanding of the capabilities and limitations of association models. The purpose of this work is two-fold: (i) to compare the performance of three models, CPA, NRHB and sPC-SAFT, in predicting the monomer fraction of water, alcohols and mixtures of alcohol-inert compounds and (ii) to investigate whether “improved” model parameters can be obtained if monomer fraction data are included in the parameter estimation together with vapor pressures and liquid densities. The expression “improved” implies parameters which can represent several pure compound properties as well as monomer fraction data for pure compounds and mixtures. The accuracy of experimental monomer fraction data is discussed, as well as the role of monomer fraction data in clarifying which association scheme should be used in these equations of state. The results reveal that the investigated association models (CPA, sPC-SAFT and NRHB) can predict, at least qualitatively correct, monomer fractions of associating compounds and mixtures. Only, small differences are observed between the models. In addition, it has been shown that, using a suitable association scheme, a single set of parameters can describe satisfactorily vapor pressures, liquid densities and monomer fractions of water and alcohols. The 4C scheme is the best choice for water, while for methanol there is small difference between the 2B and 3B association schemes.     

A Time‐Resolved Spectroscopic Study of the Bichromophoric Phototrigger 3′,5′‐Dimethoxybenzoin Diethyl Phosphate: Interaction Between the Two Chromophores Determines the Reaction Pathway

3′,5′‐Dimethoxybenzoin (DMB) is a bichromophoric system that has widespread application as a highly efficient photoremovable protecting group (PRPG) for the release of diverse functional groups. The photodeprotection of DMB phototriggers is remarkably clean, and is accompanied by the formation of a biologically benign cyclization product, 3′,5′‐dimethoxybenzofuran (DMBF). The underlying mechanism of the DMB deprotection and cyclization has, however, until now remained unclear. Femtosecond transient absorption (fs‐TA) spectroscopy and nanosecond time‐resolved resonance Raman (ns‐TR³) spectroscopy were employed to detect the transient species directly, and examine the dynamic transformations involved in the primary photoreactions for DMB diethyl phosphate (DMBDP) in acetonitrile (CH₃CN). To assess the electronic character and the role played by the individual sub‐chromophore, that is, the benzoyl, and the di‐meta‐methoxybenzylic moieties, for the DMBDP deprotection, comparative fs‐TA measurements were also carried out for the reference compounds diethyl phosphate acetophenone (DPAP), and 3′,5′‐dimethoxybenzylic diethyl phosphate (DMBnDP) in the same solvent. Comparison of the fs‐TA spectra reveals that the photoexcited DMBDP exhibits distinctly different spectral character and dynamic evolution from those of the reference compounds. This fact, combined with the related steady‐state spectral and density functional theoretical results, strongly suggests the presence in DMBDP of a significant interaction between the two sub‐chromophores, and that this interaction plays a governing role in determining the nature of the photoexcitation and the reaction channel of the subsequent photophysical and photochemical transformations. The ns‐TR³ results and their correlation with the fs‐TA spectra and dynamics provide evidence for a novel concerted deprotection–cyclization mechanism for DMBDP in CH₃CN. By monitoring the direct generation of the transient DMBF product, the cyclization time constant was determined unequivocally to be ≈1 ns. This indicates that there is little relevance for the long‐lived intermediates (>10 ns) in giving the DMBF product, and excludes the stepwise mechanism proposed in the literature as the major pathway for the DMB cyclization reaction. This work provides important new insights into the origin of the 3′,5′‐dimethoxy substitution effect for the DMB photodeprotection. It also helps to clarify the many different views presented in previous mechanistic studies of the DMB PRPGs. In addition to this, our fs‐TA results on the reference compound DMBnDP in CH₃CN provide the first direct observation (to the best of our knowledge) showing the predominance of a prompt (≈2 ps) heterolytic bond cleavage after photoexcitation of meta‐methoxybenzylic compounds. This provides insight into the long‐term controversies about the photoinitiated dissociation mode of related substituted benzylic compounds.     

Photoinduced ligand transformations in a ruthenium complex of dimethoxytetrapyridotetraazapentacene

The dinuclear ruthenium(II) complex [(phen)(2)Ru(tatpOMe)Ru(phen)(2)](4+) (2(4+); phen is 1,10-phenanthroline and tatpOMe is 10,21-dimethoxy-9,10,20,33-tetraazatetrapyrido[3,2-a:2'3'-c:3',2'-l:2',3'-n]pentacene) has been synthesized and characterized by (1)H NMR, ESI mass spectroscopy and elemental analysis. Loss of methoxy group from bridging ligand of complex 2(4+) due to irradiation is observed by (1)H NMR and photochemistry. The interrelated electronic properties UV-Vis, electrochemistry, photochemistry and molecular orbital calculation are analyzed and discussed on the bridging ligand of the complex 2(4+).