Reactivity ratios in conventional and nickel-mediated radical copolymerization of methyl methacrylate and functionalized methacrylate monomers

Copolymerization of an excess of methyl methacrylate (MMA) relative to 2-hydroxyethyl methacrylate (HEMA) was carried out in toluene at 80 °C according to both conventional and controlled Ni-mediated radical polymerizations. Reactivity ratios were derived from the copolymerization kinetics using the Jaacks method for MMA and integrated conversion equation for HEMA (r_MMA = 0.62 ± 0.04; r_HEMA = 2.03 ± 0.74). Poly(ethylene glycol) α-methyl ether, ω-methacrylate (PEGMA, M_n = 475 g mol⁻¹) was substituted for HEMA in the copolymerization experiments and reactivity ratios were also determined (r_MMA = 0.75 ± 0.07; r_PEGMA ∼ 1.33). Both the functionalized comonomers were consumed more rapidly than MMA indicating the preferred formation of heterogeneous bottle-brush copolymer structures with bristles constituted by the hydrophilic (macro)monomers. Reactivity ratios for nickel-mediated living radical polymerization were comparable with those obtained by conventional free radical copolymerization. Interactions between functional monomers and the catalyst (NiBr₂(PPh₃)₂) were observed by ¹H NMR spectroscopy.     

Electrophilic lactonization as a tool in acyclic stereocontrol. Synthesis of serricornin

Several electrophilic lactonization procedures have been explored as a means of functionalizing olefinic carboxylic acids with relative asymmetric induction, Iodolactonization of δ,? -unsaturated acids under conditions of thermodynamic control exhibits good 1,2- and 1,3-, but not 1,4-induction in the formation of δ-lactones. Mercurilactonization proceeds with good stereocontrol in the formation of both γ- and δ-lactones (1,2-induction), but suffers from the difficulty of elimination during reductive demercuration; phenylselenolactonization with N-(phenylseleno)phthalimide is apparently kinetically controlled, affording high induction with 10, a strongly sterically biased substrate leading to a δ-lactone, but not with 16, which leads to a γ-lactone. In contrast, hydroxymethyllactonization proceeds with good stereocontrol in the case of 26, the ester of 10, but not with the analogous ester of 16. The lactones resulting from cyclization of 10 and 13 were converted in stereospecific fashion into each of the stereoisomers of(±)-serricornin.     

Parameterization and evaluation of a flexible water model

The thermodynamic, dielectric, and dynamic properties of a newly parameterized flexible water model are studied using molecular dynamics simulations. The potential function developed is based on the popular simple point charge (SPC) rigid model with the addition of appropriate harmonic and anharmonic energy terms for stretching and bending. Care was taken to account for the self-polarization and gas-phase monomer energy corrections during the parameterization, which have typically been ignored in past studies. The results indicate that an increased Lennard-Jones repulsive coefficient and slightly scaled partial charges are required when adding flexibility to the rigid model potential to reliably reproduce the experimental density, energy, and O ? O radial distribution function of water at 298 K and 1 atm. Analysis of the power spectrum derived from the H-velocity autocorrelation function allowed the water potential to be evaluated further and refined by adjusting the valence forces to fit the vibrational frequencies of the gas and liquid. Once a consistent set of parameters was determined, the static dielectric properties of the water model were calculated at two temperatures using the reaction field method to treat long-range forces and correlations. The dielectric constant of 75 ± 7 calculated at 300 K is in good agreement with the experimental value of 78.5. The Kirkwood g factor was also examined for temperature dependence and showed the correct increasing behavior with decreasing T. As a final check of the water potential, the free energies of solvation of a flexible water molecule and neon were predicted using thermodynamic perturbation methods. The calculated solvation energies of ?7.0 ± 0.8 for water and 2.7 ± 0.7 for neon are both consistent with the experimental values of ?6.3 and 2.7 kcal/mol. Comparisons are made throughout the study with the results of previous rigid and flexible model simulations. © 1995 by John Wiley & Sons, Inc.     

Palladium salicylaldimine complexes containing boronate esters

Reactions of salicylaldehydes with boronate ester derivatives of aniline have been examined. Addition of these Schiff base ligands to palladium acetate or Na₂PdCl₄ afforded novel boron-containing trans-bis(N-arylsalicylaldiminato) palladium complexes.Condensation of salicylaldehyde (2-HOC₆H₄C(O)H) with H₂NC₆H₄Bpin (pin=1,2-O₂C₂Me₄) afforded the boron-containing Schiff bases, 2-HOC₆H₄C(H)=NC₆H₄Bpin (1–3a). Similar reactivity with 2-hydroxy-5-nitrobenzaldehyde and 2-hydroxy-1-naphthaldehyde gave the corresponding Schiff bases (1-3b) and (1-3c), respectively. Reaction of Schiff bases (2) and (3) with palladium acetate or Na₂PdCl₄ afforded complexes of the type PdL₂ (4,5), where L=deprotonated Schiff base. The molecular structure of the nitro-salicylaldehyde 4-Bpin palladium complex (5b) was characterized by an X-ray diffraction study. All new palladium compounds have been characterized fully and tested for their antifungal activity against Aspergillus niger and Aspergillus flavus.     

Sulfite-sensitive solvent/polymeric-membrane electrode based on bis(diethyldithiocarbamato)mercury(II)

A new solvent/polymeric-membrane electrode which exhibits significant potentiometric response toward sulfite ion in the 1 × 10_?6?1 × 10^?3 M range is described. The membrane is prepared by incorporation of neutral bis(diethyldithiocarbamato)mercury (II) in a thin film of plasticized poly (vinyl chloride). In sharp contrast to classical Hofmeister behavior, the resulting membrane displays little or no response to a wide range of anions (log K^pot_i,j ? ?4, i being sulfite) including sulfate, nitrate, nitrite, chloride, perchlorate, salicylate, and alkylsulfonates. Bromide and thiocyanate are moderate interferents, while significant response to iodide, thiosulfate, and sulfide is observed. These selectivity data, along with other response characteristics of the membrane, are used to postulate the mechanism by which the electrode responds to sulfite. Preliminary studies demonstrate that the electrode can be used in conjunction with an outer gas-permeable membrane for highly selective detection of total sulfite species in the form of sulfur dioxide.     

The calculation of molar polarizabilities by the CNDO/2 method: Correlation with the hydrophobic parameter,log P

Results of molecular orbital (MO) calculations by the complete neglect of differential overlap (CNDO /2) method on 50 small molecules are reported. The summation of calculated atomic polarizabilities are equated with molecular polarizabilities, and these are compared with experimentally determined values. It is found that there is very good agreement between calculated and experimental molecular polarizability. This provides a reliable method for the determination of molecular polarizabilities for compounds for which experimental values are not known. The relationship between log P and polarizability is discussed and analyzed in terms of contributions from electronic components to the partitioning energy.     

Microfluidic routing of aqueous and organic flows at high pressures: fabrication and characterization of integrated polymer microvalve elements

This paper presents the first systematic engineering study of the impact of chemical formulation and surface functionalization on the performace of free-standing microfluidic polymer elements used for high-pressure fluid control in glass microsystems. System design, chemical wet-etch processes, and laser-induced polymerization techniques are described, and parametric studies illustrate the effects of polymer formulation, glass surface modification, and geometric constraints on system performance parameters. In particular, this study shows that highly crosslinked and fluorinated polymers can overcome deficiencies in previously-reported microvalve architectures, particularly limited solvent compatibility. Substrate surface modification is shown effective in reducing the friction of the polymer-glass interface and thereby facilitating valve actuation. A microchip one-way valve constructed using this architecture shows a 2 x 10(8) ratio of forward and backward flow rates at 7 MPa. This valve architecture is integrated on chip with minimal dead volumes (70 pl), and should be applicable to systems (including chromatography and chemical synthesis devices) requiring high pressures and solvents of varying polarity.     

Palladium-catalyzed amidation of enol triflates: a new synthesis of enamides

[reaction: see text] The palladium-catalyzed coupling of a range of enol triflates with amides, carbamates, and sulfonamides has been developed. This offers a simple and widely applicable synthesis of enamides, which may not be readily available by other means.     

Molecular orbital calculations on tumor-inhibitory nitrosoureas: QSARs

Molecular Orbital (MO) calculations by the MINDO/3 method on tumor-inhinbitory nitrosoureas is reported. Electronic structures for 18 chlorethyl nitrosoureas and 30 cyclohexyl nitrosoureas (CCNUS ) are related to biological activity in the form of toxicity, therapeutic activity, and increase in life span and chemical reactivity in the form of alkylating and carbamoylating activity. Hydrophobicity, as measured by the logarithm of the partition coefficient (octan-1-o1/water), shows a parallelism with calculated bulk molecular properties. Mechanisms of alkylation and other reactions related to biological action are proposed and discussed.