Comparison of total folate concentrations in foods determined by microbiological assay at several experienced U.S. commercial laboratories

Analysis of total folate concentration measured by microbiological assay in a variety of foods submitted in a routine manner to experienced laboratories that regularly perform folate analysis on fee-for-service basis was evaluated. Homogenates of fresh strawberries, frozen spinach, orange juice, frozen meat and vegetable pizza, dry macaroni, and dried pinto beans were prepared and stored under conditions previously determined to maintain stability of folate content. An aliquot of each composite and of 3 certified reference materials were sent on each of 4 occasions to 4 laboratories. Results for macaroni and pizza, the only folic acid-fortified foods, had considerably lower between-laboratory variation (CV(B)) with CV(B) of 9-11% versus >45% for other foods. Mean total folate ranged from 14 to 279 microg/100 g for a mixed vegetable reference material, from 5 to 70 microg/100 g for strawberries, and from 28 to 81 microg/100 g for wholemeal flour. Only 1 laboratory reported using a tri-enzyme extraction, and all laboratories used folic acid fortified foods as internal control materials. Users of commercial total folate analysis should understand the uncertainty in values determined by microbiological assay, particularly for foods containing primarily naturally occurring folate, which may not be apparent when replicate samples are not submitted for analysis.     

A two-directional synthesis of (+/-)-perhydrohistrionicotoxin

An entirely two-directional synthesis of (+/-)-perhydrohistrionicotoxin is presented, utilizing a tandem oxime formation/Michael addition/[3 + 2] cycloaddition as the key step. This approach also constitutes formal syntheses of (+/-)-histrionicotoxin and (+/-)-histrionicotoxin 235A.     

Epoxide assisted sol-gel synthesis of rutile NixTi1-3xSb2xO2 solid solution nanoparticles

Rutile Ni _x Ti_1-3x Sb_2x O₂ solid solution nanoparticles were synthesized by a sol-gel route using propylene oxide as a gelation agent. Titanium oxide nanopowder and 12% TiCl₃ solution were used as the source for titanium to investigate the influence of the titanium precursors on the formation of the target materials. It was found that the nanoparticles prepared using 12% TiCl₃ solution showed a much lower phase formation temperature (700°C) as compared to those prepared from TiO₂ nanoparticles (1000°C). This lower phase formation temperature allowed a substantial reduction of the aggregation of the particles during calcination leading to the formation of nearly mono-dispersed nanoparticles of about 20 nm. The results of this work show that the epoxide assisted sol-gel method is capable to produce titanium-based ternary oxide solid solution nanoparticles, owing to the formation of a highly homogeneous precursor gel intermediate.     

Validation and application of a high-performance liquid chromatography/tandem mass spectrometry assay for sumatriptan in human plasma

A sensitive and convenient high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS) assay is described for the (5-HT(lB/lD)) receptor agonist sumatriptan in human plasma. Sumatriptan was recovered from plasma (81.8 +/- 6.8%) by liquid-liquid extraction. The mobile phase flow rate was 0.3 mL/min and consisted of methanol:water:formic acid (90:10:0.1, v/v/v). The analytical column (4.6 x 100 mm) was packed with Partisil C(8) (5 micro m). The standard curve was linear from 0.7 to 70.4 ng/mL (r(2) > 0.99). The lower limit of quantitation was 0.7 ng/mL. The assay was specific, accurate (percentage deviation from nominal concentrations were <15%), precise and reproducible (within- and between-day coefficients of variation <10.3%). Sumatriptan in plasma was stable over three freeze/thaw cycles and at room temperature for one day. The utility of the assay was demonstrated by following sumatriptan plasma concentrations in two healthy subjects for 8-12 h following a single 20 mg intranasal dose.     

Theoretical determination of chromophores in the chromogenic effects of aromatic neurotoxicants

We report the first computational study of the chromophores responsible for the chromogenic effects of aromatic neurotoxicants containing a 1,2-diacetyl moiety in their oxidation metabolites. A series of ab initio electronic structure calculations was performed on two representative aromatic compounds, 1,2-diacetylbenzene (1,2-DAB) and 1,2-diacetyl tetramethyl tetralin (1,2-DATT), the putative active metabolites of the neurotoxic aromatic hydrocarbon compounds 1,2-diethylbenzene (1,2-DEB) and acetyl ethyl tetramethyl tetralin (AETT), and on the products of their possible reactions with proteins that result in chromogenic effects. The electronic excitation energies determined by three different computational approaches were found to be consistent with each other. The calculated results are consistent with the conclusion/prediction that the chromogenic effects of 1,2-DAB (or 1,2-DEB) and 1,2-DATT (or AETT) could result from ninhydrin-like reactions, rather than the formation of pyrrole-like compounds. Our pK(a) calculations further indicate that the chromophore, i.e., the product of the ninhydrin-like reaction showing the blue color, is deprotonated in neutral aqueous solution. The corresponding protonated structure has a different color as it absorbs in the blue region of the visible spectrum, and its chromogenic contribution would be significant in solution at low pH.     

Assembly of a supramolecular capsule on a molecular printboard

A molecular capsule based on ionic interactions between two oppositely charged calix[4]arenes, 1 and 2, was assembled both in solution and on a surface. In solution, the formation of the equimolar assembly 1.2 was studied by (1)H NMR, ESI-MS, and isothermal titration calorimetry, giving an association constant (K(a)) of 7.5 x 10(5) M(-1). A beta-cyclodextrin self-assembled monolayer (beta-CD SAM) on gold was used as a molecular printboard to anchor the tetraguanidinium calix[4]arene (2). The binding of tetrasulfonate calix[4]arene 1 was monitored by surface plasmon resonance spectroscopy. Rinsing of the surface with a high ionic strength aqueous solution allows the removal of the tetrasulfonate calix[4]arene (1), while by rinsing with 2-propanol it is possible to achieve the complete desorption of the tetraguanidinium calix[4]arene (2) from the beta-CD SAM. The K(a) for the capsule formation on a surface is 3.5 x 10(6) M(-1), thus comparing well with the K(a) determined in solution.     

Multi-residue method for rapid screening and confirmation of pesticides in crude extracts of fruits and vegetables using isocratic liquid chromatography with electrospray tandem mass spectrometry

A LC-MS-MS method capable of the quantitative determination of a range of pesticide residues present in crude extracts from a variety of fruit and vegetables has been developed. Isocratic LC conditions have been used in conjunction with electrospray ionisation tandem mass spectrometry to detect and identify up to 38 pesticides presented as various mixtures in different matrices. The utility of the method is demonstrated by the analysis of crude extracts, with no sample clean up, from grape, kiwi fruit, strawberry, spinach, lemon, peach and nectarine. Mean recoveries ranging from 63 to 96% with relative standard deviations < 20% were obtained for 30 of the 38 pesticides following analysis of organic produce fortified at concentrations between 0.01 and 0.8 mg/kg. Detected residues were quantified from interpolation against calibration data generated using matrix-matched standards that covered analyte concentration ranges between 0.005 and 0.8 microg/ml. Conditions suitable for the qualitative and quantitative confirmation of residues detected in samples are specified.     

Speciation of arsenic in ground water samples: A comparative study of CE-UV, HG-AAS and LC-ICP-MS

The performance of capillary electrophoresis-ultraviolet detector (CE-UV), hydride generation-atomic absorption spectrometry (HG-AAS) and liquid chromatography-inductively coupled plasma mass spectrometry (LC-ICP-MS) have been compared for the speciation of arsenic (As) in groundwater samples. Two inorganic As species, arsenite (As^III), arsenate (As^V) and one organo species dimethyl arsenic acid (DMA) were mainly considered for this study as these are known to be predominant in water. Under optimal analytical conditions, limits of detection (LD) ranging from 0.10 (As^III, AsT) to 0.19 (DMA) μg/l for HG-AAS, 100 (As^III, DMA) to 500 (As^V) μg/l for CE-UV and 0.1 (DMA, MMA) to 0.2 (As^III, As^V) μg/l for LC-ICP-MS, allowed the determination of the above three species present in these samples. Results obtained by all the three methods are well correlated (r² = 0.996*** for total As) with the precision of <5% R.S.D. except CE-UV. The effect of interfering ions (e.g. Fe²⁺, Fe³⁺, SO₄²⁻ and Cl⁻) commonly found in ground water on separation and estimation of As species were studied and corrected for. Spike recovery was tested and found to be 80-110% at 0.5 μg/l As standard except CE-UV where only 50% of the analyte was recovered. Comparison of these results shows that LC-ICP-MS is the best choice for routine analysis of As species in ground water samples.