An experimental investigation of Curle's theory of aerodynamic noise generation by a stationary body in a turbulent air stream

Bies et al. (J. Sound Vib. 204(4) (1997) 631) investigated Curle's theory (Proc. R. Soc. Ser. A 231 (1955) 505) published in 1955 over a wide range of flow speeds from about 50-200 m/s and found only partial agreement with the experimental data. Here the experimental investigation has been repeated allowing the data to be recorded in a format amenable to analysis, which was not previously possible.Reintroduction of a term neglected by Curle has been found necessary as Curle's compact source condition ensures so low a radiation impedance that the effect cannot be detected in the jet background noise. The reintroduction of the term, which has been neglected, allows his analysis to include radiation from sources not compact but less than half a wavelength in characteristic dimension. It is shown that the power ratio defined as the measured sound power divided by Curle's amended prediction converges to about 3 whereas Curle predicts that the power ratio should converge to 1 as the wave number converges to zero. The introduction of the empirically determined constant 3 into Curle's prediction brings the measurements into very good agreement with prediction over the entire range of the non-dimensional wave numbers from about 0.4 to 3.2.     

Equilibrium States in the Quadruple–Kerr Solution

The extended quadruple–Kerr metric is used to consider equilibrium states of four collinear Kerr particles. We explain our previous failure to solve numerically the full set of the balance equations, and we derive a self–consistent system of the axis conditions leading to the equilibrium of all four constituents which can be black holes or hyperextreme objects. The equilibrium configurations obtained in this paper exhibit similar features with those occurring in the systems of two Kerr particles, for instance, the balance of four Kerr black holes with positive masses does not seem possible. Equilibrium states of two identical compound Kerr objects are also discussed.     

Letter: Models of Relativistic Particle with Curvature and Torsion Revisited

Models, describing relativistic particles, where Lagrangian densities depend linearly on both the curvature and the torsion of the trajectories, are revisited in D=3 space forms. The moduli spaces of trajectories are completely and explicitly determined using the Lancret program. The moduli subspaces of closed solitons in the three sphere are also determined.     

Unusual current‐voltage characteristics of single crystalline and bicrystalline La0.7Ca0.3MnO3 films

The current‐voltage characteristics of single crystalline and bicrystalline La_0.7Ca_0.3MnO₃ films were measured and analyzed. Several epitaxial films, as well as 45° [001]‐tilt grain boundaries, display current‐voltage characteristics which are asymmetric with respect to polarity reversal of the bias current. One epitaxial film has a polarity dependent resistance of ～340kΩ and of ～670kΩ in forward and in reverse direction, respectively.     

Noise emitted by water supply installations

This work deals with the problem of noise generated by water supply systems in homes. Measurements were made in situ to determine normal conditions of installations and noise levels generated in different rooms in the home. In order to determine the sources of noise and the best construction methods to minimise noise generation, a laboratory was also built to reproduce the conditions of this type of installation in homes. Tests were carried out in this laboratory on different configurations of type of tap, installation material, walling and fastening of the installation, to allow quantitative determination of the differences in noise generation between the various configurations used in households.     

T-duality in Affine NA Toda Models

The construction of non-Abelian affine Toda models is discussed in terms of its underlying Lie algebraic structure. It is shown that a subclass of such non-conformal two-dimensional integrable models naturally leads to the construction of a pair of actions, which share the same spectra and are related by canonical transformations.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

JET: Preparing the future in fusion

JET (Joint European Torus) is the largest tokamak in the world and the only fusion facility able to operate with Tritium, the fusion fuel, and Beryllium, the ITER first wall material. JET also features the most complete remote handling equipment for invessel maintenance. As a multinational research center, JET provides logistic experience in preparing for operation of the global facility, tokamak ITER.Experiments on JET are focused on ITER-relevant studies, in particular on detailing the operational scenarios (EL My H-modes and advanced regimes), on enhancing the heating systems, on developing diagnostics for burning plasmas etc. Pioneering real-time control techniques have been implemented that maximize performance and minimize internal disturbances of JET plasmas. In helium plasmas, ion cyclotron heating (ICRH) created fast α-particles, mimicking their populations in future burning plasmas. The recent successful Trace Tritium campaign provided important new data on fuel transport. Current enhancements on JET include a new ITER-like ELM-resilient high power ICRH antenna (7 MW) and over twenty new diagnostics that will further extend the JET scientific capabilities and push the facility even closer to the ITER parameters.A special mention is given to the involvement of the fusion experts from Association EURATOM-IPP.CR, who have been actively participating in the collective use of JET facility for more than three years.     

Adaptation of selected diagnostic techniques to magnetic confinement fusion experiments

The paper concerns several diagnostic techniques, which have been used in pulsed-power plasma experiments, i.e. Plasma-Focus and Z-Pinch devices, and which can be adapted to studies of Magnetic Confinement Fusion (MCF) facilities, e.g. Stellarators and Tokamaks. The application of Nuclear Track Detectors (NTDs) for time-integrated ion measurements in MCF experiments is described and the use of such detectors for time-resolved ion measurements is discussed. The application of special ?erenkov-type detectors for time resolved measurements of fast runaway electrons is considered. Also discussed is the use of selected nuclear reactions for measurements of fusion products, e.g. fast neutrons.