Dimethyl Sulfoxide: A Bio-Friendly or Bio-Hazard Chemical? The Effect of DMSO in Human Fibroblast-like Synoviocytes

The effect of dimethyl sulfoxide (DMSO) in rheumatoid arthritis (RA) human fibroblast-like synoviocytes (FLSs) has been studied on five different samples harvested from the joints (fingers, hands and pelvis) of five women with RA. At high concentrations (>5%), the presence of DMSO induces the cleavage of caspase-3 and PARP-1, two phenomena associated with the cell death mechanism. Even at a 0.5% concentration of DMSO, MTT assays show a strong toxicity after 24 h exposure (≈25% cell death). Therefore, to ensure a minimum impact of DMSO on RA FLSs, our study shows that the concentration of DMSO has to be below 0.05% to be considered safe.     

Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steels

The technique to weld AISI 304 stainless steel to AISI 420 stainless steel with a pulsed Nd:YAG laser has been investigated. The main objective of this study was to determine the influence of the laser beam position, with respect to the joint, on weld characteristics. Specimens were welded with the laser beam incident on the joint and moved 0.1 and 0.2 mm on either side of the joint. The joints were examined in an optical microscope for cracks, pores and to determine the weld geometry. The microstructure of the weld and the heat affected zones were observed in a scanning electron microscope. An energy dispersive spectrometer, coupled to the scanning electron microscope, was used to determine variations in (weight %) the main chemical elements across the fillet weld. Vickers microhardness testing and tensile testing were carried out to determine the mechanical properties of the weld. The results of the various tests and examinations enabled definition of the best position for the incident laser beam with respect to the joint, for welding together the two stainless steels.     

Thermodynamic equilibrium between locally excited and charge-transfer states through thermally activated charge transfer in 1-(pyren-2′-yl)-o-carborane

Reversible conversion between excited-states plays an important role in many photophysical phenomena. Using 1-(pyren-2′-yl)-o-carborane as a model, we studied the photoinduced reversible charge-transfer (CT) process and the thermodynamic equilibrium between the locally-excited (LE) state and CT state, by combining steady state, time-resolved, and temperature-dependent fluorescence spectroscopy, fs- and ns-transient absorption, and DFT and LR-TDDFT calculations. Our results show that the energy gaps and energy barriers between the LE, CT, and a non-emissive ‘mixed’ state of 1-(pyren-2′-yl)-o-carborane are very small, and all three excited states are accessible at room temperature. The internal-conversion and reverse internal-conversion between LE and CT states are significantly faster than the radiative decay, and the two states have the same lifetimes and are in thermodynamic equilibrium.

Reversible conversion between excited-states is key to many photophysical phenomena. We studied the equilibrium between LE and CT states by time-resolved and temperature-dependent fluorescence, fs- and ns-transient absorption, and LR-TDDFT calculations.     

Analysis of Plant–Plant Interactions Reveals the Presence of Potent Antileukemic Compounds

A method to identify anticancer compounds in plants was proposed based on the hypothesis that these compounds are primarily present in plants to provide them with an ecological advantage over neighboring plants and other competitors. According to this view, identifying plants that contain compounds that inhibit or interfere with the development of other plant species may facilitate the discovery of novel anticancer agents. The method was developed and tested using Magnolia grandiflora, Gynoxys verrucosa, Picradeniopsis oppositifolia, and Hedyosmum racemosum, which are plant species known to possess compounds with cytotoxic activities. Plant extracts were screened for growth inhibitory activity, and then a thin-layer chromatography bioautography assay was conducted. This located the major antileukemic compounds 1, 2, 4, and 5 in the extracts. Once the active compounds were located, they were extracted and purified, and their structures were determined. The growth inhibitory activity of the purified compounds showed a significant correlation with their antileukemic activity. The proposed approach is rapid, inexpensive, and can easily be implemented in areas of the world with high biodiversity but with less access to advanced facilities and biological assays.     

Current and frequency modulation characteristics for continuous-wave quantum cascade lasers at 9.06 μm

We report the characteristics of current induced frequency modulation (FM) for two continuous-wave quantum cascade lasers (QCLs) at 9.06 μm. Both the frequency tuning rate and the phase shift between intensity modulation and FM are measured at different modulation frequencies from 10 Hz to 200 kHz. The frequency tuning rate of the QCLs depends on both the modulation frequency and amplitude. The tested QCL has been used to detect ambient water vapor with wavelength modulation spectroscopy for validation with a numerical model.     

The work function of hydrothermally synthesized UO2 and the implications for semiconductor device fabrication

The photoelectric work function of nearly stoichiometric (111) and (100) hydrothermally grown UO₂ was measured to be 6.28 ± 0.36 eV and 5.80 ± 0.36 eV, respectively. Candidate metals for electrical contacts are identified for both rectifying and non‐rectifying contacts based on work function, lattice compatibility, and electrical conductivity.     

A terahertz polarization insensitive dual band metamaterial absorber

Metamaterial absorbers have attracted considerable attention for applications in the terahertz range. In this Letter, we report the design, fabrication, and characterization of a terahertz dual band metamaterial absorber that shows two distinct absorption peaks with high absorption. By manipulating the periodic patterned structures as well as the dielectric layer thickness of the metal-dielectric-metal structure, significantly high absorption can be obtained at specific resonance frequencies. Finite-difference time-domain modeling is used to design the structure of the absorber. The fabricated devices have been characterized using a Fourier transform IR spectrometer. The experimental results show two distinct absorption peaks at 2.7 and 5.2?THz, which are in good agreement with the simulation. The absorption magnitudes at 2.7 and 5.2?THz are 0.68 and 0.74, respectively.     

Derivative temporal clustering analysis: detecting prolonged neuronal activity

Temporal clustering analysis (TCA) and independent component analysis (ICA) are promising data-driven techniques in functional magnetic resonance imaging (fMRI) experiments to obtain brain activation maps in conditions with unknown temporal information regarding the neuronal activity. Although comparable to ICA in detecting transient neuronal activities, TCA fails to detect prolonged plateau brain activations. To eliminate this pitfall, a novel derivative TCA (DTCA) method was introduced and its algorithms with different subtraction intervals were tested on simulated data with a pattern of prolonged plateau brain activation. It was found that the best performance of DTCA method in generating functional maps could be obtained if the subtraction interval is equal to or larger than the length of the rising time of the fMRI response. The DTCA method and its theoretical predication were further investigated and validated using in vivo fMRI data sets. By removing the limitations in the previous TCA, DTCA has shown its powerful capability in detecting prolonged plateau neuronal activities.