Study of isotope exchange reactions by double labelling

This paper presents the method of double labelling in the study of the kinetics of homogeneous isotope exchange reactions. This method was tested by the determination of the Sn(II)−Sn(IV) exchange rate in hydrochloric acid medium. The system was labelled by the tracer^119mSn [initially in the Sn(IV) state]; when the isotope equilibrium was established, Sn(IV) was again labelled by tracer¹¹³Sn. The separation of Sn(II) and Sn(IV) in the given time of exchange was performed by the extraction of Sn(IV)-hydroxyquinolate into chloroform. The specific activities of the separated components were determined from the ratio of¹¹³Sn and^119mSn activities. The exchange rate was calculated from the time dependence of specific activities. The advantage and possibilities of the method of double labelling in the study of isotope exchange are discussed.     

Processes dominating forced-flow thin-layer chromatography

Summary The effect of the vapor phase and other special influences on thin-layer chromatography have been investigated. Comparisons were made of the relationships of time vs. developing distance and flow rate vs. efficiency using a planar arrangement of the thin-layer. Covering the layer facilitates the reproducibility and of the migration front but the most effective optimization step for thin-layer chromatography is provided by forced-flow of the mobile phase. It is suggested that planar chromatography with a covered sorbent layer and using a pressurised solvent stream should be calledforced-flow thin-layer chromtatography.     

Thermal decomposition of copolymers of styrene and halogenated monomers

Copolymers of 1,2,2,2-tetrachloroethyl esters of unsaturated acids and halogenated N-phenyl maleimides with styrene were pyrolyzed; volatile products were analyzed with a mass spectrometer combined with a gas chromatograph. Hydrogen halide and carbon dioxide in the volatile products were determined during the thermal decomposition of copolymers in glass ampoules; the acyl chloride groups were determined in the residues. The thermal decomposition of copolymers of tetrachloroethyl esters with styrene sets in at ca. 230° by the release of chloral from the copolymer and splitting of some of the CCl bonds in the copolymer. The decomposition of copolymers of styrene with halogenated N-phenyl maleimides starts above 300° by depolymerization of the polystyrene chain sections and by splitting of some of the carbon-halogen bonds. At 310 and 500° for copolymers of tetrachloroethyl esters and at 500° for halogenated N-phenyl maleimides, there is radical dehydrohalogenation of the copolymers, with depolymerization of polystyrene blocks and splitting of carbon-carbon bonds in the main chain.     

A viscometric study of poly(methyl methacrylate) in 2-alkoxyethanols

θ-Conditions, the temperature coefficient of unperturbed dimensions of the macromolecules and the thermodynamic interaction parameters ψ and κ were determined for solutions of poly(methyl methacrylate) in 2-alkoxyethanols (methoxy, ethoxy and butoxy). The results for this series of solvents fit the data reported for other solvents and dln $\text{r}{}_0{}^2\text{/}\text{d}\text{T = 2.6 × 10}{}^{\mathrm{?3}}\text{K}{}^{\mathrm{?1}}$. The dependence of parameters ψ and κ exhibited deviations from the theoretical dependence, mainly near the limiting value ψ = 0.5.     

Are dipolar liquids ferroelectric?

VH and HV depolarized hyper-Rayleigh scattering spectra were measured for liquid solutions of dipolar CH3CN in nondipolar C2Cl4 at T=300 K. The VH spectrum contains a strong narrow peak due to a slowly relaxing longitudinal orientation mode. This peak is absent in the HV spectrum, and it disappears from the VH spectrum when the CH3CN concentration is reduced to 8%. This observation is consistent with a ferroelectric phase transition predicted to occur when rho mu0(2)=9epsilon0kT=49 D2 M.     

A field theoretical approach to calculate electronic Born-Oppenheimer coupling terms

In this paper we suggest to consider the spatial distribution of the Born-Oppenheimer nonadiabatic coupling terms as fields which are created by sources, located at degeneracy points, and which can be derived using the ordinary mathematical tools of field theory. It is shown that the curl-divergence equations as formed within a given Hilbert space [M. Baer, Chem. Phys. Lett. 35, 112 (1975)] can be converted into a set of inhomogeneous coupled Poisson equations which are solved for a given set of boundary conditions. The method is applied to the three-state Hilbert subspace of the H(3) system. The numerical results are compared with ab initio calculations for which a very encouraging fit is found.     

On distribution of molecular weight in anionic polymerizates of caprolactam

Measurement has been made of the dependence of the molecular weight distribution on the ratio of the catalytic system components and on the polymerization time for polycaprolactam obtained by anionic polymerization. A bimodal character of the curves was observed for products made using molar ratios of activator (N-benzoylcaprolactam) to initiator (sodium dihydro-bis(methoxyethoxy)aluminate) of 1:1 and 1:3, when the polymerization times were less than 1 hr. This course is explained by the influence of fast side-reactions, mainly condensations. For a ratio of 3:1 of the components of the catalytic system, smooth integral distribution curves are obtained, accounting for a very fast decrease in the strong base concentration in the initial stages of the polymerization.     

Application of capillary zone electrophoresis and reversed-phase high-performance liquid chromatography in the biopharmaceutical industry for the quantitative analysis of the monosaccharides released from a highly glycosylated therapeutic protein

Two assays for the quantitative determination of the neutral and amino-monosaccharides attached to a therapeutic glycoprotein were developed using capillary zone electrophoresis (CZE) and RP-HPLC. These assays meet the strict batch release requirements of the quality control in biopharmaceutical industry. The monosaccharides were released from the glycoprotein by hydrolysis with 2N trifluoroacetic acid. In the CZE assay the monosaccharides were reacetylated prior to derivatization with 8-aminopyrenesulfonic acid (APTS), reacetylation in the glycoprotein matrix was investigated in detail. The RP-HPLC method used pre-column derivatization with anthranilic acid in methanol-acetate-borate reaction medium; reacetylation was not necessary. However, epimerization of the different monosaccharides was observed and studied in detail. For the quantitative assay, separation of the amino-monosaccharide epimers had to be developed. The HPLC assay was validated.     

High accuracy ab initio studies of Li6+, Li6-, and three isomers of Li6

The structures and energetics of Li(6) (+), Li(6) (-) and three isomers of Li(6) are investigated using the coupled-cluster singles, doubles and perturbative triples [CCSD(T)] method with valence and core-valence correlation consistent basis sets of double- to quadruple-zeta quality (cc-pVXZ and cc-pCVXZ, where X=D-Q). These results are compared with qualitatively different predictions by less reliable methods. Our results conclusively show that the D(4h) isomer is the global minimum structure for Li(6). It is energetically favored over the C(5v) and D(3h) structures by about 5.1 and 7.1 kcal mol(-1), respectively, after the inclusion of the zero-point vibrational energy (ZPVE) correction. Our most accurate total atomization energies are 123.2, 117.6, and 115.7 kcal mol(-1) for the D(4h), C(5v), and D(3h) isomers, respectively. Comparison of experimental optical absorption spectra with our computed electronic spectra also indicate that the D(4h) isomer is indeed the most stable structure. The cation, anion, and some higher spin states are investigated using the less expensive cc-pCVDZ basis set. Adiabatic ionization energies and electron affinities are reported and compared with experimental values. Predictions of molecular properties are found to be sensitive to the basis set used and to the treatment of electron correlation.     

Spectral and electrochemical study of coordination molecules Cu4OX6L4: 3-Methylpyridine and 4-Methylpyridine Cu4OBrnCl(6−n)L4 complexes

The tetranuclear Cu₄OBr_nCl_(6-n)L₄ complexes, where L = 3-methylpyridine (3-Mepy), 4-methylpyridine (4-Mepy) and n=0–6 with trigonal bipyramidal coordination of copper(II) were prepared and their infrared and electronic absorption spectra as well as cyclic voltammograms in nitromethane solutions were measured. The polyhedra in Cu₄OBr_nCl_(6−n) (3-Mepy)₄ molecules are less distorted comparing with those of 4-Mepy analogues as indicated by infrared Cu₄O absorptions, far infrared Cu—Br, Cu—Cl, and Cu—N absorptions, d—d bands in electronic spectra and potentials, measured by cyclic voltammetry. The 3-Mepy complexes exhibit strong single infrared Cu₄O absorptions, while for related 4-Mepy complexes doubly split Cu₄O bands were observed. Two strongly overlapped d—d bands in electronic absorption spectra of the 3-and 4-Mepy complexes in nitromethane were resolved by Gaussian fitting. The 4-Mepy ligand produces slightly stronger ligand field than its 3-Mepy analogue. The maxima of high-energy d—d bands are in a linear correlation with the number of bromide ligands. The correlations for corresponding low-energy bands are considerably deviated from linearity. The halfwave potentials of the complexes in nitromethane correlate with both the number of bromides and the data of electronic absorption spectra suggesting that the reducing electron at the electrode process enters the half-filled d _{z 2} orbital of the copper(II) atom. The origin of a difference between the 3-and 4-Mepy complexes in their spectral and electrochemical properties is also discussed.