Hybrid organosilazane/organosilylamine telechelic oligomers—I. Two-dimensional NMR spectroscopy characterization of dimethylsilylethylenediamine oligomers

The detailed characterization of multifunctional hybrid organosilazane/organosilylamine telechelic oligomers by IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy in one and two dimenions has been undertaken. The specific multifunctional oligomers, comprising NH/NH₂ or SiCl functionalities depending on the monomer feed-ratio, were prepared from mono- and di-functionally reacted dichlorodimethylsilane (DDS) and mono-, di-, tri- and tetra-functionally reacted ethylenediamine (EDA). Varying the feed-ratio afforded control of the microstructures of the oligomers and the preparation of oligomers with, in some cases, conterminously located silicon–chlorine (SiCl) groups. The combination of the NMR methods with the IR technique has enabled the detailed microstructural characterization of the oligomers and the identification of the functionalities therein. This approach and the knowledge gained from the DDS/EDA system has been applied to the microstructural characterization of other hybrid organosilazane/silylamine preceramic telechelic oligomers.     

Branched chain discotics Phase structure and orientation behaviour

Studies show that branching the side chains of hexakis(acoyloxy)-benzenes (HAB) and -cyclohexanes (HAChx) does not modify the structure of the discotic mesophase formed. Shear fields appear to act on entire columns, not on individual discs, thereby causing alignment of columns in the shear direction. X-ray diffraction patterns of samples at temperatures between 30°C and 40°C above the clearing temperature provide evidence for the presence of mesophase order.     

On the Causes and Effects of Contaminations during rf Diode Deposition of Cr-Si Alloys

Investigations to the causes and effects of contaminants at the rf diode deposition of CrSi films in a non-heated high vacuum apparatus were carried out comparing an oxygen-free fusion target with an oxygen-containing cermet target. The films of the fusion target contained considerable amounts of oxygen; analogously the oxygen concentration in the films was increased in the case of the cermet target. Moreover, hydrogen was found. The concentration of the contaminants decreased with the sputtering power, however the rate of incorporation increased. For high sputtering rates the contamination process was reproducible and independent of the plant conditioning; the deposited films were depth-homogeneous. The reasons for this behaviour lie in water sources which are activated first of all by the discharge itself. The electrical properties found are explained by the contaminants and the deposition conditions.     

Numerical Study on Population Inversion and Lasing Conditions in an Optically Thick Recombining Helium Plasma

Lasing conditions for He I in a cold recombining helium plasma are numerically discussed including optical thicknesses. A collisional radiative model is used to calculate population densities. We discuss the effect of self absorptions by the background residual gas on the lasing conditions quantitatively. The optical thickness is essential in the calculation and affects the population inversions between level pairs of the singlet state drastically, while those of the triplet state are not affected very much. In the optically thin plasma, the laser lower levels of the singlet state depopulate mainly through radiative transitions. On the other hand, they depopulate mainly through electron collisional deexcitations in the optically thick plasma. Results of the calculations are verified by the spectroscopic observations of an arc-heated magnetically trapped expanding plasma jet generator which we developed. The requirement for the background pressure in which the lasing is possible is discussed quantitatively.     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

Molecular addressing? Studies on light-induced reorientation in liquid-crystalline side chain polymers

Polarized light leads to an effective reorientation of the optic axis in the glassy state of liquid-crystalline side chain polymers containing azobenzene mesogenic groups, via a trans-cis and cis-trans isomerization. Using a combination of U V and IR dichroitic studies it is shown for copolymers consisting of chromophores (azobenzene) and non-chromophores (phenylbenzoate) that only the chromophores are reoriented by light as far as the glassy state is concerned. Individual chromophores are thus addressed by photoselection. Photoselection in the fluid nematic state, on the other hand, leads also to a reorientation of the non-chromophores.     

A high performance liquid chromatographic assay for AMP-deaminase activity in the erythrocytes of healthy subjects and patients with inherited purine disorders

A novel method for measuring AMP-deaminase activity in human erythrocytes is presented, based on the determination of the reaction product, IMP, using high performance liquid chromatography. IMP formation was found to be proportional both to the incubation time and the amount of haemolysate over a wide range. The minimal detectable AMP-deaminase activity was more than 1000 times lower than the mean activity found in healthy controls (1083 nmol/h/mg Hb). No marked difference of activity was found in the patients with the following inherited purine disorders: familial juvenile gouty nephropathy and deficiencies of adenosine deaminase, hypoxanthine-guanine phosphoribosyltransferase or adenine phosphoribosyltransferase. The activity in the erythrocytes of patients with chronic renal failure was also similar to controls. The existence of subjects with low erythrocyte AMP-deaminase activity in the population has been confirmed.     

Novel optical techniques for the analysis of polymer surfaces and thin films

Summary We report on novel optical techniques, based on evanescent waves, for the characterization of polymer surfaces and thin films. We first describe photo-ablation studies with polysilane films investigated by surface plasmon microscopy, a technique which is particularly well-suited for ultrathin samples. Thicker films that are homogeneous enough to carry optical waveguide modes can be characterized with high lateral resolution by the recently developed waveguide microscopy. We demonstrate this for a thin film of a solid polyelectrolyte. Finally, we report on surface plasmon field-enhanced Raman-spectroscopic and -imaging investigations of ultrathin Langmuir-Blodgett-Kuhn-layers of cadmium arachidate.W. Hickel is now with HOECHST AG, Angewandte Physik, W-6230 Frankfurt 80     

The liquid-crystalline behaviour of amphiphilic ethane-1,2-diol derivatives incorporating a six membered ring in their principal structure

Novel 3-phenyloxy substituted propane-1,2-diol derivatives, 4-(4-n-hexyloxyphenyl)-butane-1,2-diol and 4-(trans-4-n-pyropylcyclohexyl)-butane-1,2-diol have been synthesized and their thermal behaviour has been studied. These compounds exhibit thermotropic and, after addition of water, also lyotropic liquid-crystalline behaviour. The clearing temperatures of the smectic mesophases were found to be strongly dependent on the alkyl chain length and on the structural units that link the aromatic ring to the alkyl chain and to the diol unit. The behaviour of the aromatic compounds is compared with that of the cyclohexane derivative. Thereby it has been realized that the mesophase stability of the amphiphilic diols incorporating a rigid unit is largely determined by both, the molecular geometry (molecular shape and intramolecular flexibility) and the amphiphilic structural pattern.     

Existence of solutions for the time-dependent thermistor equations

The equations describing the behaviour of temperature/flow microsensorsemploy-ing polysilicon thermistors form a degenerate nonlinearparabolic system. One special feature is that different equationsof this system are to be satisfied on different domains. Bymeans of supersolutions and subsolutions, the maximum principle,and fixed point arguments, the authors show the existence ofsolutions to the equations.