Polyaniline/Single‐Walled Carbon Nanotubes Composite Based Triglyceride Biosensor

Nanocomposite film comprising of polyaniline (PANI) and single walled carbon nanotubes (SWCNT) has been fabricated onto indium‐tin‐oxide (ITO) coated glass plate using electrophoretic technique. Co‐immobilization of glycerol dehydrogenase (GDH) and lipase (LIP) has been done via N‐ethyl‐N′‐(3‐dimethylaminopropyl) carbodiimide and N‐hydroxysuccinimide chemistry to explore its application for triglyceride (tributyrin) sensing. Response studies have been done using linear sweep voltammetry revealing that LIP‐GDH/PANI‐SWCNT‐TB/ITO bioelectrode can detect tributyrin in the range of 50 to 400 mg dL^?1 with low Michaelis–Menten constant of 1.138 mM, improved response time of 12 s, high sensitivity as 4.28×10^?4 mA mg^?1 dL and storage stability of about 13 weeks.     

Electrophoretically deposited polyaniline nanotubes based film for cholesterol detection

Polyaniline nanotube (PANI-NT) based films have been fabricated onto indium-tin-oxide (ITO) coated glass plates via electrophoretic technique. These PANI-NT/ITO electrodes have been utilized for covalent immobilization of cholesterol oxidase (ChOx) using glutaraldehyde (Glu) as cross-linker. Structural, morphological and electrochemical characterization of PANI-NT/ITO electrode and ChOx/Glu/PANI-NT/ITO bioelectrode have been done using FT-IR spectroscopy, SEM, electrochemical impedance spectroscopy and cyclic voltammetry techniques. Response studies of the ChOx/Glu/PANI-NT/ITO bioelectrode have been carried out using both linear sweep voltammetry and UV-Visible spectrophotometry. The results of the biosensing studies reveal that this bioelectrode can be used to detect cholesterol in wide detection range of 25-500 mg/dL with high sensitivity of 3.36 mA mg(-1) dL and fast response time of 30 s at pH 7.4. This bioelectrode exhibits very low value of Michaelis-Menten constant of 1.18 mM indicating enhanced interactions between cholesterol and ChOx immobilized onto this nanostructured PANI matrix.     

Controlled buckling and crumpling of nanoparticle-coated droplets

We introduce a new experimental approach to study the structural transitions of large numbers of nanoparticle-coated droplets as their volume is reduced. We use an emulsion system where the dispersed phase is slightly soluble in the continuous phase. By adding a fixed amount of unsaturated continuous phase, the volume of the droplets can be controllably reduced, causing them to buckle or crumple, thereby becoming nonspherical. The resultant morphologies depend both on the extent of volume reduction and the average droplet size. The buckling and crumpling behavior implies that the droplet surfaces are solid.     

A Thermostable Alkaline Lipase from a Local Isolate Bacillus subtilis EH 37: Characterization, Partial Purification, and Application in Organic Synthesis

A mesophilic bacterial culture producing a novel thermostable alkaline lipase was isolated from oil rich soil sample and identified as Bacillus subtilis EH 37. The lipase was partially purified by ammonium sulfate precipitation and hydrophobic interaction chromatography with 17.8-fold purification and 41.9 U/ml specific activity. The partially purified enzyme exhibited maximum activity at pH 8.0 and at 60 °C. It retained 100% of activity at 50 °C and 60 °C for 60 min. The presence of Ca⁺², Mg⁺², and Zn²⁺ exhibited stimulatory effect on lipase activity, whereas Fe⁺³ and Co⁺² reduced its activity. The enzyme retained more than 80% of its initial activity upon exposure to organic solvents, exhibited 107% and 115% activity in the presence of 15% isopropyl alcohol and 30% n-hexane, respectively. The EH 37 lipase also proved to be an efficient catalyst in synthesis of ethyl caprylate in organic solvent, thus providing a concept of application of B. subtilis lipase in non-aqueous catalysis.     

Cobalt-thioalkylazoimidazole complexes: Structures, spectra and redox properties

1-Alkyl-2-{(o-thioalkyl)phenylazo}imidazole (SRaaiNR^/, 1) reacts with Co(ClO₄)₂·6H₂O to form [Co(SRaaiNR^/)₂](ClO₄)₂ (2). The single crystal X-ray structure of one of the complexes of 2 shows a tridentate chelation N(imidazole), N(azo), S(thioether) system. In the structure one of ClO₄⁻ anions shows disorder and forms an (imidazole)C–H···O(ClO₃) interaction leading to a 1-D chain. Co(OAc)₂.4H₂O and SRaaiNR^/ react in the presence of NH₄SCN (1:1:2 mole ratio) in methanol and the complex [Co(SRaaiNR^/)₂(SCN)₂] (3) has been separated. The single crystal X-ray structure determination has established the structure of the complexes in which the ligand SRaaiNR^/ acts in a bidentate N(imidazole), N(azo) chelation mode. A cyclic voltammogram shows a Co(III)/Co(II) oxidative response at 0.6–0.8 V and azo reductions. DFT computation using optimized geometry support the electronic spectral and redox properties of the complexes.     

Coumarinyl azoimidazolyl complexes of osmium(II) hydridocarbonyls: spectroscopic and structural characterization,oxidation catalysis,photovoltaic effect and density functional theory computation

Os(II) hydridocarbonyl complexes of coumarinyl azoimidazoles, [Osh(CO)(PPh₃)₂(CZ‐4R‐R′)]^0/+ ( 3 , 4 ) (CZ‐R‐H = 2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole or 1‐alkyl‐2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole), were characterized from spectroscopic data and the single‐crystal X‐ray data for one of the complexes, [Osh(CO)(PPh₃)₂(CZ‐4‐Ph)] ( 3c ) (CZ‐4‐Ph = 2‐(coumarinyl‐6‐azo)‐4‐phenylimidazolate), confirmed the structure. The complexes show higher emission (quantum yield ? = 0.0163–0.16) and longer lifetime (τ = 1.4–10.3 ns) than free ligands (? = 0.0012–0.0185 and τ = 0.685–1.306 ns). Cyclic voltammetry shows quasi‐reversible metal oxidation at 0.67–0.94 V for [Os(III)/Os(II)] and 1.21–1.36 V for [Os(IV)/Os(III)] and subsequent azo reductions (?0.68 to ?0.95 V for [? N?N? ]/[? N N? ]^? and irreversible < ?1.2 V for [? N N? ]^?/[? N? N? ]^2?) of the chelated coumarinyl azoimidazole. The complexes are photostable and show better photovoltaic power conversion efficiency than free ligands. Also, the complexes were used as catalysts for the oxidation of primary/secondary alcohols to aldehydes/ketones using oxidizing agents like N‐methylmorpholine N‐oxide, t‐BuOOH and H₂O₂. Density functional theory computation was carried out from the optimized structures and the data obtained were used to interpret the electronic and photovoltaic properties. Copyright © 2016 John Wiley & Sons, Ltd.     

Metallo-organic domino reactions: C-H versus C-C bond breaking

HL and MeL are prepared by condensing benzil dihydrazone with 2-formylpyridine and 2-acetylpyridine, respectively, in 1:2 molar proportions. While in a reaction with [Ru(C(6)H(6))Cl(2)]2, HL yields the cation [Ru(C(6)H(6)){5,6-diphenyl-3-(pyridin-2-yl)-1,2,4-triazine}Cl]+, MeL gives the cation [Ru(C(6)H(6))(MeL)Cl]+. Both the cations are isolated as their hexafluorophosphate salts and characterised by X-ray crystallography. In the case of HL, double domino electrocyclic/elimination reactions are found to occur. The electrocyclic reaction occurs in a C=N-N=C-C=N fragment of HL and the elimination reaction involves breaking of a C-H bond of HL. Density functional calculations on model complexes indicate that the identified electrocyclic reaction is thermochemically as well as kinetically feasible for both HL and MeL in the gas phase. For a double domino reaction, similar to that operative in HL, to occur for MeL, breaking of a C-C bond would be required in the elimination step. Our model calculations show the energy barrier for this elimination step to be much higher (329.1 kJ mol(-1)) for MeL than that for HL (96.3 kJ mol(-1)). Thus, the domino reaction takes place for HL and not for MeL. This accounts for the observed stability of [Ru(C(6)H(6))(MeL)Cl]+ under the reaction conditions employed.     

Group 6 tetracarbonyl complexes of N-[(2-pyridyl)methyliden]-α (or β)-aminonaphthalene: Spectral characterization,electrochemistry, solvatochromism and photophysical studies

A new series of group 6 carbonyl complexes of N-[(2-pyridyl)methyliden]-α (or β)-aminonaphthalene (α/β-NaiPy) are described in this work. The complexes are formulated as cis-[M(CO)₄(α/β-NaiPy)] by elemental, mass and other spectroscopic data. The complexes show emission spectra at room temperature and their quantum yield lies between 0.4 and 0.5. All the complexes exhibit negative solvatochromism. Cyclic voltammetry shows metal centred oxidation and ligand reductions.     

“Grafting through” polymerization involving surface-bound monomers

“Grafting through” polymerization represents copolymerization of free monomers in solution and polymerizable units bound to a substrate. Free polymer chains are formed initially in solution and can incorporate the surface-bound monomers, and thereby, get covalently bonded to the surface during the polymerization process. As more growing chains attach to the surface-bound monomers, an immobilized polymer layer is formed on the surface. We use a combination of computer simulation and experiments to comprehend this process for monomers bound to a flat impenetrable substrate. We concentrate specifically on addressing the effect of spatial density of the surface-bound monomers on the formation of the surface-attached polymers. We employ a lattice-based Monte Carlo model utilizing the bond fluctuation model scheme to provide molecular-level insight into the grafting process. For experimental validation, we create gradients of density of bound methacrylate units on flat silicon wafers using organosilane chemistry and carry out “grafting through” free radical polymerization initiated in bulk. We report that the proximity of the surface-bound polymerizable units promotes the “grafting through” process but prevents more free growing chains to “graft through'' the polymerizable units. The “grafting through” process is self-limiting in nature and does not affect the overall density of the surface-bound polymer layer, except in case of the highest theoretical packing density of surface-bound monomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 263–274     

The interplay of hydrophobic and electrostatic effects in the surfactant-induced aggregation/deaggregation of chlorin p6

The aggregation/deaggregation of chlorin p6 with the surfactants CTAB, SDS, and TX 100 have been studied by using absorption, fluorescence, and light scattering techniques. The ionic surfactants are found to cause aggregation of fluorophore at submicellar concentrations. The aggregates dissolve at higher surfactant concentrations to yield micellized monomers. This is rationalized by the interplay of electrostatic and hydrophobic effects. A prominent pH effect is observed in the ionic surfactant induced aggregation process as the charge on the fluorophore is controlled by the pH of the medium. Interestingly, the neutral TX-100 also induces aggregation of chlorin p6 at low concentrations, indicating that hydrophobic effects by themselves can cause aggregation unless there is a hindrance by repulsive electrostatic effects.