Formatation of pore structure in tape-cast alumina membranes – effects of binder content and firing temperature

Disc type ceramic aluminium oxide membrane has been prepared by tape casting technique. Thickness of this single layer membrane is in the range 200–300 μm. Porosity and pore size distribution have been determined by mercury porosimetry. Polymeric binder content of the green tape and the firing temperature are found to have strong influence on the average pore size, pore size distribution and overall porosity. Higher binder content promotes agglomeration of the ceramic particles, which on firing leads to wider pore size distribution and formation of closed pores. Pore coarsening is observed with increasing firing temperature.     

Acidic peroxo salts. A new class of initiators for vinyl polymerization. I. Kinetics of polymerization of acrylonitrile initiated by potassium monopersulfate catalyzed by Ag(I)

The kinetics of polymerization of acrylonitrile initiated by KHSO₅ and catalyzed by Ag(I) have been investigated in an aqueous medium over the temperature range of 35–50°C. The rates of polymerization R_p have been calculated and studied with respect to monomer and initiator. The catalytic activity of various metal ions on the initiator has been determined from a comparison of R_p values. The effects of monomer, catalyst, neutral salts, various amines, and inhibitor (hydroquinone) on the initial rate as well as maximum conversion have been studied. From the kinetics results a suitable reaction scheme has been proposed.     

Separation of molybdenum from tungsten with di(2-ethylhexyl)-phosphoric acid ac extractant

The use of di(2-ethylhexyl)phosphoric acid (HDEHP) as an extractant for the separation of molybdenum from tungsten was examined with the help of molybdenum-99 and tungsten-187 as radiotracers. Effective separation was obtained when the aqueous phase contained phosphoric acid at pH 0.8–2 or pH 3–3.5, depending on the amounts of metal. The method is applicable to both tracer and milligram amounts of molybdenum. The structure of the extracted species was examined by infrared spectroscopy.     

Doubly excited3Se,3De and3Ge states of two-electron atomic systems

Summary Time-dependent perturbation theory has been applied to calculate the doubly excited triplet statesNsns:³S^e,Npnp:³D^e andNdnd:³G^e (N=2, 3, 4,n=N+1, ... ,5) for He, Li⁺, Be²⁺ and B³⁺. A time-dependent harmonic perturbation causes simulataneous excitation of both the electrons with a change of spin state. The doubly excited energy levels have been identified as the poles of an appropriately constructed linearized variational functional with respect to the driving frequency. In addition to the transition energies, effective quantum numbers of these doubly excited states have been calculated and analytic representations of their wave functions are obtained. These are utilized to estimate the Coulomb repulsion term for these states which checks the consistency of the wave functions. These wave functions may also be used for calculating other physical properties of the systems.     

A mild, highly selective and remarkably easy procedure for deprotection of aromatic acetates using ammonium acetate as a neutral catalyst in aqueous medium

Ammonium acetate was found to catalyze efficiently the selective deprotection of aromatic acetates in the presence of various sensitive functionalities in aqueous methanol under neutral conditions at room temperature to yield the corresponding phenols in excellent yields. The method has been utilized for deprotection of acetates of several naturally occurring bioactive phenolic compounds and for preparation of venkatasin, a natural coumarino-lignan, from the anticancer compound cleomiscosin A.     

Spectroscopic and structural features of small thiocarbonyl molecules in low-lying excited states: Further applications of a variant of the orthogonal gradient method

Structural parameters of a set of five thiocarbonyl molecules in the lowest nπ* states are calculated by using a generalized orbital optimization algorithm (a variant of the orthogonal gradient method) in an INDO MCSCF framework. Transition energies, singlet-triplet splittings, planar inversion barriers, and dipole moments in nπ* states of different spin multiplicities are reported. Predicted structural features agree reasonably well with available experimental or theoretical data. Some interesting trends are noted in the computed inversion barrier heights, singlet-triplet splittings, and dipole moments in nπ* states.     

Studies on the exchange characteristics of [Co(NH3)6]3+ in amberlite IRC-50

Summary The exchange of Co(NH₃)₆]³⁺-ions on amberlite IRC-50 resin has been studied at room temperature. For this exchange process the cations are effective in the order: Cs⁺<Rb⁺<K⁺<Na⁺<Li⁺<NH₄ ⁺<Mg²⁺ <Ca²⁺<H⁺ and (C₂H₅)₄N<(CH₃)₄N⁺ ≪Cetyltrimethylammonium-ion <Cetylpyridinium-ion. The logarithm of the selectivity coefficient gives linear graphs when plotted against the radius of the hydrated ions or the reciprocals of theDebye-Hückel parameter?.     

Zeolite-mediated photochemical charge separation using a surface-entrapped ruthenium-polypyridyl complex

Employing the strategy of quaternization of the 2,2' N atoms of the conjugated bipyridine ligand 1,4-bis[2-(4'-methyl-2,2'-bipyrid-4-yl)ethenyl]benzene (L), a polypyridyl complex of ruthenium(II) was tethered on the surface of zeolite Y. Electrochemical and spectroscopic properties of the complex suggest that, upon visible photoexcitation of the MLCT band, the electron is localized on the conjugated ligand rather than the bipyridines. Electron transfer from the surface complex to bipyridinium ions (methyl viologen) within the zeolite was observed. Visible light photolysis of the ruthenium-zeolite solid ion-exchanged with diquat and suspended in a propyl viologen sulfonate solution led to permanent formation of the blue propyl viologen sulfonate radical ion in solution. The model that is proposed involves intrazeolitic charge transfer to ion-exchanged diquat followed by interfacial (zeolite to solution) electron transfer to propyl viologen sulfonate in solution. Because of the slow intramolecular back-electron-transfer reaction and the forward electron propagation via the ion-exchanged diquat, Ru(III) is formed. This Ru(III) complex formed on the zeolite is proposed to react rapidly with water in the presence of light, followed by reaction with the propyl viologen sulfonate, to form pyridones and regeneration of Ru(II), which then continues the photochemical process.     

A family of vanadate esters of monoionized and diionized aromatic 1,2-diols: synthesis,structure, and redox activity

The concerned diols (general abbreviation, H(2)L) are catechol (H(2)L(1)) and its 3,5-Bu(t)(2) derivative (H(2)L(2)). Esters of the type VO(xsal)(HL), 2, are obtained by reacting H(2)L with VO(xsal)(H(2)O) or VO(xsal)(OMe)(HOMe), where xsal(2-) is the diionized salicylaldimine of glycine (x = g), L-alanine (x = a), or L-valine (x = v). The reaction of VO(acac)(2) with H(2)L and the salicylaldimine (Hpsal) of 2-picolylamine has furnished VO(psal)(L), 3. In the structures of VO(gsal)(HL(1)), 2a, and VO(vsal)(HL(2)), 2f, the HL(-) ligand is O,O-chelated, the phenolic oxygen lying trans to the oxo oxygen atom. The xsal(2-) coligand has a folded structure and the conformation of 2f is exclusively endo. In both 2a and 2f the phenolic oxygen atom is strongly hydrogen bonded (O...O, 2.60 A) to a carboxylic oxygen atom of a neighboring molecule. In VO(psal)(L(2)).H(2)O, 3b, the diionized diol is O,O-chelated to the metal and the water molecule is hydrogen bonded to a phenoxidic oxygen atom (O.O, 2.84 A). The C-O and C-C distances in the V(diol) fragment reveal that 2 is a pure catecholate and 3 is a catecholate-semiquinonate hybrid. In solution each ester gives rise to a single (51)V NMR signal (no diastereoisomers), which generally shifts downfield with a decrease in the ester LMCT band energy. The V(V)/V(IV) and catecholate-semiquinonate reduction potentials lie near -0.75 and 0.35, and 1.10 and 0.70 V vs SCE for 2 and 3, respectively. Molecular oxygen reacts smoothly with 2 quantitatively furnishing the corresponding o-quinone, and in the presence of H(2)L the reaction becomes catalytic. In contrast, type 3 esters are inert to oxygen. The initial binding of O(2) to 2 is proposed to occur via hydrogen bonding with chelated HL(-).     

Synthesis of chiral 4-hydroxy-2,3-unsaturated carbonyl compounds from 3,4-epoxy alcohols by oxidation: application in the formal synthesis of macrosphelide A

An interesting transformation during the oxidation of 3,4-epoxy alcohols 1a-d, derived from the corresponding homoallylic alcohols, led to the formation of 4-hydroxy-2,3-unsaturated carbonyls 2a-d in very good yields. One of these products 2c was transformed into the functionalised carboxylic acid 5, an advanced stage intermediate from which the total synthesis of macrosphelide A has been reported.