Autoxidation of hydrazones. Some new insights

Autoxidation of hydrazones is a generally occurring reaction, leading mostly to the formation of alpha-azohydroperoxides. All structural kinds of hydrazones, having at least one hydrogen atom on nitrogen, are prone to autoxidation; however, there are marked differences in the rate of the reaction. Hydrazones of aliphatic ketones are 1-2 orders of magnitude more reactive than analogous derivatives of aromatic ketones. Even less reactive are the hydrazones of chalcones, which function also as efficient inhibitors of autoxidation of other hydrazones. These differences can be attributed to the reduction of the rate of the addition of oxygen to a hydrazonyl radical, which is a reversible reaction. In the case of conjugated ketones, it becomes endothermic, making this elementary step slow down and the chain termination reactions become important. Substituents influence the stability of hydrazonyl radicals and, consequently, the bond dissociation energies of the N-H bonds. In acetophenone phenylhydrazones, the substituents placed on the ring of hydrazine moiety exhibit a higher effect (Hammett rho = -2.8) than those on the ketone moiety (rho = -0.82), which denotes higher importance of the structure with spin density concentrated on nitrogen in delocalized hydrazonyl radical. Electronic effects of the substituents also affect the transition state for the abstraction of hydrogen atom by electrophilic peroxy radicals; NBO analysis display a negative charge transfer of about 0.4 eu from hydrazone to a peroxy radical in the transition state.     

Spreading speed and travelling wave solutions of a partially sedentary population

In this paper, we extend the population genetics model of Weinberger(1978, Asymptotic behavior of a model in population genetics.Nonlinear Partial Differential Equations and Applications (J.Chadam ed.). Lecture Notes in Mathematics, vol. 648. New York:Springer, pp. 47–98.) to the case where a fraction ofthe population does not migrate after the selection process.Mathematically, we study the asymptotic behaviour of solutionsto the recursion u_n+1 = Q_g[u_n], where In the above definition of Q_g, K is a probabilitydensity function and f behaves qualitatively like the Beverton–Holtfunction. Under some appropriate conditions on K and f, we showthat for each unit vector R^d, there exists a c^*_g() which hasan explicit formula and is the spreading speed of Q_g in thedirection . We also show that for each c c^*_g(), there existsa travelling wave solution in the direction which is continuousif gf '(0) 1.     

Targeting EGFR-overexpressed A431 cells with EGF-labeled silica-coated magnetic nanoparticles

Electrode catalysts composed of carbon-supported PtRu nanoparticles (PtRu/C) for use as a direct methanol fuel cell anode were synthesized by the reduction of precursor ions in an aqueous solution via irradiation with a high-energy electron beam. The effect of pH control in the precursor solution on the PtRu mixing state and the methanol oxidation activity was studied in order to enhance the catalytic activity for methanol oxidation. The PtRu/C structures were characterized by transmission electron microscopy, inductively coupled plasma atomic emission spectrometry, X-ray fluorescence spectrometry, and X-ray diffraction and X-ray absorption fine structure techniques. The methanol oxidation activity was evaluated by linear sweep voltammetry. The initial pH of the precursor solution has little influence on the average grain size for the metal particles (approximately 3.5 nm) on the carbon particle supports, but the dispersibility of the metal particles, PtRu mixing state, and methanol oxidation activity differed. The maintenance of a low pH in the precursor solution gave the best dispersibility of the PtRu nanoparticles supported on the surface of the carbon particles, whereas, a high pH gave the best PtRu mixing state and the highest oxidation current although a low dispersibility of the PtRu nanoparticles supported on the surface of the carbon particles was obtained. The PtRu mixing state strongly correlated with the methanol oxidation current. In addition, a high pH was more effective for PtRu mixing when using an electron beam irradiation reduction method, because the complexation reaction of the chelating agents was improved, which resulted in an enhancement of the catalytic activity for methanol oxidation.     

Structure-activity correlations in a nickel-borate oxygen evolution catalyst

An oxygen evolution catalyst that forms as a thin film from Ni(aq)(2+) solutions containing borate electrolyte (Ni-B(i)) has been studied by in situ X-ray absorption spectroscopy. A dramatic increase in catalytic rate, induced by anodic activation of the electrodeposited films, is accompanied by structure and oxidation state changes. Coulometric measurements correlated with X-ray absorption near-edge structure spectra of the active catalyst show that the nickel centers in activated films possess an average oxidation state of +3.6, indicating that a substantial proportion of nickel centers exist in a formal oxidation state of Ni(IV). In contrast, nickel centers in nonactivated films exist predominantly as Ni(III). Extended X-ray absorption fine structure reveals that activated catalyst films comprise bis-oxo/hydroxo-bridged nickel centers organized into sheets of edge-sharing NiO(6) octahedra. Diminished long-range ordering in catalyst films is due to their ostensibly amorphous nature. Nonactivated films display a similar oxidic nature but exhibit a distortion in the local coordination geometry about nickel centers, characteristic of Jahn-Teller distorted Ni(III) centers. Our findings indicate that the increase in catalytic activity of films is accompanied by changes in oxidation state and structure that are reminiscent of those observed for conversion of β-NiOOH to γ-NiOOH and consequently challenge the long-held notion that the β-NiOOH phase is a more efficient oxygen-evolving catalyst.     

Functionalization of magnetic nanoparticles with 3-aminopropyl silane

Superparamagnetic maghemite nanoparticles were functionalized with 3-aminopropyl triethoxy silane (APS). The influence of the different experimental parameters (temperature, pH, and reactant concentration) on the efficiency of the APS bonding directly to the maghemite nanoparticles or after their coating with a thin layer of silica was systematically studied. The functionalization was followed with measurements of the ζ-potential and direct measurements of the surface APS concentration on the nanoparticles. The surface concentration of the APS was much higher in the case when the APS was bonded to the silica-coated nanoparticles compared to bonding directly to the surfaces of the iron-oxide nanoparticles.     

Influence of synthesis method on structural and magnetic properties of cobalt ferrite nanoparticles

The Co–ferrite nanoparticles having a relatively uniform size distribution around 8 nm were synthesized by three different methods. A simple co-precipitation from aqueous solutions and a co-precipitation in an environment of microemulsions are low temperature methods (50 °C), whereas a thermal decomposition of organo-metallic complexes was performed at elevated temperature of 290 °C. The X-ray diffractometry (XRD) showed spinel structure, and the high-resolution transmission electron microscopy (HRTEM) a good crystallinity of all the nanoparticles. Energy-dispersive X-ray spectroscopy (EDS) showed the composition close to stoichiometric (~CoFe₂O₄) for both co-precipitated nanoparticles, whereas the nanoparticles prepared by the thermal decomposition were Co-deficient (~Co_0.6Fe_2.4O₄). The X-ray absorption near-edge structure (XANES) analysis showed Co valence of 2+ in all the samples, Fe valence 3+ in both co-precipitated samples, but average Fe valence of 2.7+ in the sample synthesized by thermal decomposition. The variations in cation distribution within the spinel lattice were observed by structural refinement of X-ray absorption fine structure (EXAFS). Like the bulk CoFe₂O₄, the nanoparticles synthesized at elevated temperature using thermal decomposition displayed inverse spinel structure with the Co ions occupying predominantly octahedral lattice sites, whereas co-precipitated samples showed considerable proportion of cobalt ions occupying tetrahedral sites (nearly 1/3 for the nanoparticles synthesized by co-precipitation from aqueous solutions and almost 1/4 for the nanoparticles synthesized in microemulsions). Magnetic measurements performed at room temperature and at 10 K were in good agreement with the nanoparticles’ composition and the cation distribution in their structure. The presented study clearly shows that the distribution of the cations within the spinel lattice of the ferrite nanoparticles, and consequently their magnetic properties are strongly affected by the synthesis method used.     

Trajectory-Based Interpretation of Laser Light Diffraction by a Sharp Edge

In the diffraction pattern produced by a half-plane sharp edge when it obstructs the passage of a laser beam, two characteristic regions are noticeable. There is a central region, where the diffraction of laser light appears in the region of geometric shadow, while intensity oscillations are observed in the non-obstructed area. On both sides of the edge, there are also very long light traces along the normal to the edge of the obstacle. The theoretical explanation of this phenomenon is based on the Fresnel–Kirchhoff diffraction theory applied to the Gaussian beam propagation behind the obstacle. In this paper, we supplement this explanation by considering electromagnetic flow lines, which provide a more complete interpretation of the phenomenon in terms of electric and magnetic fields and flux lines; at the same time, that can be related to average photon paths.     

Structure of manganese zinc ferrite spinel nanoparticles prepared with co-precipitation in reversed microemulsions

The structure of Mn_0.5Zn_0.5Fe₂O₄ spinel ferrite nanoparticles is studied as a function of their size and the experimental conditions of their synthesis using X-ray absorption spectroscopy. The nanoparticles of different sizes down to approximately 2 nm and with a narrow size distribution were synthesized using co-precipitation in reverse microemulsions. Simultaneous refinement of the X-ray absorption fine structure (EXAFS) of three constituting metals shows a migration of Mn and Zn ions to the octahedral site of the spinel lattice compensated by the corresponding migration of the Fe ions. To a smaller extent, Mn ions switch the occupation site already in bulk and in larger nanoparticles, while a sporadic migration of Zn is detected only in the nanoparticles with sizes below approximately 5 nm. X-ray absorption near edge structure (XANES) reveals considerable variations in the position of the Mn K edge, suggesting the average Mn valence in the nanoparticles to be higher than 3+. Annealing at 500 °C relaxes the structure of as-synthesized nanoparticles toward the structure of the ceramic bulk standard. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Removal of Flotation Collector O-Isopropyl-N-ethylthionocarbamate from Wastewater

Flotation collector O-isopropyl N-ethylthionocarbamate (IPETC) is widely used for separation of sulfide ores. Its removal from water by several oxidation processes was studied. Photocatalytic oxidation with air in the presence of iron salts, utilizing solar irradiation or artificial UV-A light is very efficient. Oxidation leads through the formation of O-isopropyl N-ethylcarbamate and several other reaction intermediates to total decomposition of organic compound in the final stage in 1 day. Similar results were obtained with a Fenton type oxidation with hydrogen peroxide and iron salts. Treatment with sodium hypochlorite yields mainly O-isopropyl N-ethylcarbamate. The formation of this compound in wastewaters can be of concern, since simple alkyl carbamates are cancer suspect agents.