Coordination versatility of tridentate pyridyl aroylhydrazones towards iron: tracking down the elusive aroylhydrazono-based ferric spin-crossover molecular materials

The two potentially tridentate and monoprotic Schiff bases acetylpyridine benzoylhydrazone (HL(1)) and acetylpyridine 4-tert-butylbenzoylhydrazone (HL(2)) demonstrate remarkable coordination versatility towards iron on account of their propensity to undergo tautomeric transformations as imposed by the metal centre. Each of the pyridyl aroylhydrazone ligands complexes with the ferrous or ferric ion under strictly controlled reaction conditions to afford three six-coordinate mononuclear compounds [Fe(II)(HL)(2)](ClO(4))(2), [Fe(II)L(2)] and [Fe(III)L(2)]ClO(4) (HL = HL(1) or HL(2)) displaying distinct colours congruent with their intense CT visible absorptions. The synthetic manoeuvres rely crucially on the stoichiometry of the reactants, the basicities of the reaction mixtures and the choice of solvent. Electrochemically, each of these iron compounds exhibits a reversible metal-centred redox process. By all appearances, [Fe(III)(L(1))(2)]ClO(4) is one of only two examples of a crystallographically elucidated iron(III) bis-chelate compound of a pyridyl aroylhydrazone. Several pertinent physical measurements have established that each of the Schiff bases stabilises multiple spin states of iron; the enolate form of these ligands exhibits greater field strength than does the corresponding neutral keto tautomer. To the best of our knowledge, [Fe(III)(L(1))(2)]ClO(4) and [Fe(III)(L(2))(2)]ClO(4) are the first examples of ferric spin crossovers of aroylhydrazones. Whereas in the former the spin crossover (SCO) is an intricate gradual process, in the latter the (6)A(1)?(2)T(2) transition curve is sigmoidal with T(?)～280 K and the SCO is virtually complete. As regards [Fe(III)(L(1))(2)]ClO(4), M?ssbauer and EPR spectroscopic techniques have revealed remarkable dependence of the spin transition on sample type and extent of solvation. In frozen MeOH solution at liquid nitrogen temperature, both iron(III) compounds exist wholly in the doublet ground state.     

Microwave-Assisted Method for Synthesis of 1,3-Disubstituted Pyrroles

1,3-Disubstituted pyrroles were prepared by a microwave-assisted reaction of pyrrolidine and aldehydes in toluene as well as in solvent-free conditions. Reactions were completed in a few minutes in the solvent-free condition but a long time (up to 30 min) was necessary to complete reactions in toluene. Yields of products depended considerably on the aldehyde used.     

Synthesis of N-Alkylimino-1,2-di(9-carbazolyl)ethanes-Evidence for the Mechanism of the Reaction of Dichloroacetylene with Primary Amines

Dichloroacetylene (C₂Cl₂) reacts with carbazole and primary amines under phase-transfer catalytic (PTC) conditions to give 1-N-alkylimino-1,2-di(9-carbazolyl)ethanes (I) and 9-((E)-1,2-dichlorovinyl)carbazole (II) in one-step synthesis. Compounds I are formed from the addition of amines to the triple bond of C₂Cl₂ followed by reactions with carbazole.     

Theoretical Treatment of a Cathodic Stripping Mechanism of an Insoluble Salt Coupled with a Chemical Reaction in Conditions of Square Wave Voltammetry. Application to 6‐Mercaptopurine‐9‐D‐Riboside in the Presence of Ni(II)

Cathodic stripping mechanism of an insoluble salt coupled with a homogenous chemical reaction is considered both theoretically and experimentally under conditions of square‐wave voltammetry. For the mercury electrode in aqueous solution, the electrode reaction is described as L(aq)+Hg(l)=HgL(s)+2e^?, where L(aq) is the reactive ligand that forms a sparingly soluble compound HgL(s). The electrode reaction is coupled with a homogenous, first‐order chemical reaction, A(aq)=L(aq). Theoretical predictions are confirmed by experiments with 6‐mercaptopurine‐9‐D‐riboside in the presence of nickel(II) ions.     

Temperature-induced isomerization of violaxanthin in organic solvents and in light-harvesting complex II

Three main xanthophyll pigments are bound to the major photosynthetic pigment-protein complex of Photosystem II (LHCII): lutein, neoxanthin and violaxanthin. Chromatographic analysis of the xanthophyll fraction of LHCII reveals that lutein appears mainly in the all-trans conformation, neoxanthin in the 9'-cis conformation and major fraction of violaxanthin in the all-trans conformation. Nevertheless, a small fraction of violaxanthin appears always in a cis conformation: 9-cis and 13-cis (approximately 4% and 2% in the darkness, respectively). Illumination of the isolated complex (5 min, 445 nm, 250 micromolm-2s-1) results in the substantial increase in the concentration of the cis steric conformers of violaxanthin: up to 6% of 9-cis and 4% of 13-cis. Similar effect can be obtained by dark incubation of the same preparation for 30 min at 60 degrees C. Heating-induced isomerization of the all-trans violaxanthin can also be obtained in the organic solvent system but the formation of the 9-cis stereoisomer has not been observed under such conditions. The fact that the appearance of the 9-cis form of violaxanthin is specific for the protein environment suggests that violaxanthin may replace neoxanthin in LHCII in the N1 xanthophyll binding pocket and that the protein stabilizes this particular conformation. The analysis of the electronic absorption spectra of LHCII and the FTIR spectra of the protein in the Amid I band spectral region indicates that violaxanthin isomerization is associated with the disaggregation of the complex. It is postulated that this reorganization of LHCII provides conditions for desorption of violaxanthin from the pigment protein complexes, its diffusion within the thylakoid membrane and therefore, availability to the enzymatic deepoxidation within the xanthophyll cycle. It is also possible that violaxanthin isomerization plays the role of a security valve, by consuming an energy of excessive excitations in the antenna pigment network (in particular, exchanged at the triplet state levels).     

Investigation of the alumina properties with adsorbed polyvinyl alcohol

The influence of solution pH on the structure of polyvinyl alcohol adsorption layer on the alumina surface was investigated. The spectrophotometry, viscosimetry, thermogravimetry, potentiometric titration and microelectrophoresis were applied in experiments. These methods enable determination of the following parameters: adsorbed amount of PVA, stability of suspension without and with polymer, thickness of its adsorption layers, changes in thermal characteristics of Al₂O₃ surface with the adsorbed polymer, surface charge density and zeta potential of solid particles in the presence and absence of PVA, respectively. All measurements were carried out in the pH range 3–9. The obtained results indicate that pH has a great influence on the conformation of PVA chains adsorbed on the alumina surface. It is due to incomplete hydrolysis of acetate groups of polyvinyl alcohol macromolecules (degree of hydrolysis 97.5%), which dissociate with the increasing pH. Moreover, the polymer adsorption on the alumina surface causes changes in the course of thermogravimetric curves. The effect of weight loss for Al₂O₃–PVA systems is smaller than that of Al₂O₃ without polymer. It is due to elimination of water molecules from the solid surface by adsorbed polymer.     

A Convenient Synthesis of ω-[(Arylphosphonomethyl)Amino] Alkylphosphonic and Carboxylic Acids via in Situ–Generated Arylideneaminoalkyl- Phosphonic or Carboxylic Acids

ω-[(Arylphosphonomethyl)amino]alkylphosphonic and carboxylic acids are prepared in an easy work-up procedure, by addition of diethyl phosphite to in situ–generated arylideneaminoalkylphosphonic or carboxylic acids followed by hydrolysis with hydrochloric acid     

Crystal structure and magnetic properties of Ce7Ni5±xGe3±xIn6 and Pr7Ni5±xGe3±xIn6

The indides Ce₇Ni_5±xGe_3±xIn₆ and Pr₇Ni_5±xGe_3±xIn₆ were synthesized from the elements by arc-melting of the components. Single crystals were grown via special annealing sequences. Both structures were solved from X-ray single crystal diffraction data: new structure type, P6/m, Z=1, a=11.385(2), c=4.212(1) Å, wR₂=0.0640, 634F² values, 25 variables for Ce₇Ni_4.73Ge_3.27In₆ and a=11.355(6), c=4.183(2) Å, wR₂=0.0539, 563F² values, 25 variables for Pr₇Ni_4.96Ge_3.04In₆. Both indides show homogeneity ranges through Ni/Ge mixing (M sites). This new structure type can be derived from the AlB₂ structure type by a substitution of the Al and B atoms by CeM₁₂ and NiIn₆Ce₃ polyhedra (tricapped trigonal prism). Magnetic susceptibility measurements on a polycrystalline sample of Ce₇Ni₅Ge₃In₆ indicated Curie-Weiss like paramagnetic behavior down to 1.71 K with the effective magnetic moment slightly reduced in relation to the value expected for trivalent cerium ions. No magnetic ordering is evident.     

Bis(tetraethylammonium) tetrabromocobaltate(II) and bis(tetrabutylammonium) tetrabromomanganate(II): structure and magnetic properties

The crystal structures of tetrabromocobaltate(II) and tetrabromomanganate(II) salts of general formula [(C₂H₅)₄N]₂[CoBr₄] (1) and [(C₄H₉)₄N]₂[MnBr₄] (2) were determined. The manganese and cobalt cations are four-coordinated by bromide anions and they adopt a slightly distorted tetrahedral coordination. In the structure of both compounds there are neither hydrogen bonds nor any unusual short-range intermolecular interactions. Magnetic measurements of the powdered samples gave negative values of the Weiss constants equal to −4.9 and −1.1 K for (1) and (2), respectively, which suggest antiferromagnetic interactions to be transferred within the crystal lattice.