Screening of Three Transition Metal‐Mediated Reactions Compatible with DNA‐Encoded Chemical Libraries

The construction of DNA‐encoded chemical libraries (DECLs) crucially relies on the availability of chemical reactions, which are DNA‐compatible and which exhibit high conversion rates for a large number of diverse substrates. In this work, we present our optimization and validation procedures for three copper and palladium‐catalyzed reactions (Suzuki cross‐coupling, Sonogashira cross‐coupling, and copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC)), which have been successfully used by our group for the construction of large encoded libraries.     

Synthesis and characterization of iPP‐sPP stereoblock produced by a binary metallocene system

Stereoblock polypropylenes comprising of iPP and sPP segments are synthesized by polymerization of the following binary system of metallocenes: the C_s‐symmetric [2,7‐t‐Bu₂(Flu)₂Ph₂C(Cp)ZrCl₂] and the C₂‐symmetric rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂. Blends of samples made either by each catalyst individually (solution blend) with materials obtained with the mixed catalyst system (reactor blend) are compared. The simultaneous presence of MAO and DEZ, enhancing fast and reversible transfer of the growing chains between the two active centers, leads to the formation of a stereoblock microstructure. In this case, low molecular weight polymers are obtained. The junction between the blocks is qualitatively observed in ¹³C NMR. When made in toluene, the stereoblock material consists of a majority of syndiotactic sequences, whereas the ratio is more equilibrated when the polymerization was conducted in the more polar chlorobenzene. This is confirmed by the results obtained with ¹³C NMR, CRYSTAF, HT HPLC, DSC, SSA, WAXD, and optical microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1422–1434     

Synthesis,Characterization and Evaluation of the Antibacterial and Antitumor Activity of HalogenatedSalen Copper (II) Complexes derived from Camphoric Acid

Platinum metal complexes are the most common chemotherapeutics currently used in cancer treatment. However, the frequent adverse effects, as well as acquired resistance by tumor cells, urge the development of effective alternatives. In the recent past, copper complexes with Schiff base ligands have emerged as good alternatives, showing interesting results. Accordingly, and in continuation of previous studies in this area, three new camphoric acid-derived halogenated salen ligands and their corresponding Cu (II) complexes were synthesized and their antitumor activity was evaluated in order to determine the influence of the type and number of halogens present (Br, Cl). The in vitro cytotoxic activity was screened against colorectal WiDr and LS1034 and against breast MCF-7 and HCC1806 cancer cell lines. The results proved the halogenated complexes to be very efficient, the tetrachlorinated Cu (II) complex being the most promising, presenting IC₅₀ of 0.63–1.09 μM for the cell lines studied. The complex also shows selectivity to colorectal cancer cells compared to non-tumor colon cells. It is worth highlighting that the tetrachlorinated Cu (II) complex, our most efficient complex, shows a significantly more powerful antitumor effect than the reference drugs currently used in conventional chemotherapy. The halogenated salen and corresponding complexes were also screened for their antimicrobial activity against four bacterial species-Staphylococcus aureus, Enterococcus faecalis, Escherichia coli and Pseudomonas aeruginosa-and four fungal species-Candida albicans, Candida glabrata, Aspergillus fumigatus and Alternaria alternata. The compounds were found to exhibit moderate to strong antibacterial activity against the bacterial strains studied. NMR studies and theoretical calculations provided some insight into the structure of the ligands and copper complexes. Considering the results presented herein, our work validates the potential use of copper-based chemotherapeutics as alternatives for cancer treatment.     

Solvent‐free inkjet printing process for the fabrication of conductive,transparent, and flexible ionic liquid‐polymer gel structures

A new and solvent‐free process for the fabrication of inkjet printed ionic liquid‐polymer gel microstructures with high‐resolution (line widths of ～40 μm), good electrical conductivity (5–30 mS cm^?1), optical transparency, and mechanical flexibility is presented. Carrying out the printing and polymerization process in nitrogen atmosphere eliminates the inhibiting influence of oxygen and guarantees homogeneously gelled structures. Careful selection and combination of ionic liquids (ILs) and unsaturated monomers makes it possible to achieve low viscosities which are printable with commercially available inkjet printers and printheads without adding extra solvents. By using different types and amounts of ILs and monomers the resulting properties of the printed IL‐polymer gels can be controlled in terms of ionic conductivity, optical transmission, and mechanical flexibility. Higher conductivities are possible by using a bifunctional instead of a monofunctional monomer, which allows one to lower the amount of monomer without loss in mechanical strength. Cast samples make it possible to obtain data of transmission (～90% for 170‐μm thick films) and mechanical flexibility (E = 0.02–0.23 MPa) of bulk material. Comparing electrical conductivity of printed and cast samples, the higher values of printed samples indicate the conductivity enhancing influence of moisture absorbed from the surrounding atmosphere after the fabrication process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Macrocyclic Polyethers as Enolate Activators in Homogeneous and Heterogeneous Systems

Abstract

The ability of macrocyclic polyethers to activate enolates has been studied in the alkylation of de-oxybenzoin (1) with butyl derivatives nBuY (Y = Br, I, OMes) catalyzed by crown ether PHDB18C6 (7) or cryptand [2.2.2,C10] (8) under phase-transfer catalysis (PTC) and homogeneous (chlorobenzene) conditions. The enolate reactivity is mainly determined by the ligand (cryptand > crown ether) and solvent (increasing with the polarity, in the order: toluene < chlorobenzene < 1,2dichlorobenzene). Regioselectivity of the reaction is also remarkably affected by ligand and alkylating agent.     

Bursting synchronization in networks with long-range coupling mediated by a diffusing chemical substance

Many networks of physical and biological interest are characterized by a long-range coupling mediated by a chemical which diffuses through a medium in which oscillators are embedded. We considered a one-dimensional model for this effect for which the diffusion is fast enough so as to be implemented through a coupling whose intensity decays exponentially with the lattice distance. In particular, we analyzed the bursting synchronization of neurons described by two timescales (spiking and bursting activity), and coupled through such a long-range interaction network. One of the advantages of the model is that one can pass from a local (Laplacian) type of coupling to a global (all-to-all) one by varying a single parameter in the interaction term. We characterized bursting synchronization using an order parameter which undergoes a transition as the coupling parameters are changed through a critical value. We also investigated the role of an external time-periodic signal on the bursting synchronization properties of the network. We show potential applications in the control of pathological rhythms in biological neural networks.     

Exploring the Reactivity of a Frustrated Sn/P Lewis Pair: The Highly Selective Complexation of the cis-Azobenzene Photoisomer

The reactivity of the geminal frustrated Lewis pair (FLP) (F₅C₂)₃SnCH₂P(tBu)₂ ( 1 ) was explored by reacting it with a variety of small molecules (PhOCN, PhNCS, PhCCH, tBuCCH, H₃CC(O)CH=CH₂, Ph[C(O)]₂Ph, PhN=NPh and Me₃SiCHN₂), featuring polar or non-polar multiple bonds and/or represent α,β-unsaturated systems. While most adducts are formed readily, the binding of azobenzene requires UV-induced photoisomerization, which results in the highly selective complexation of cis-azobenzene. In the case of benzil, the reaction does not lead to the expected 1,2- or 1,4-addition products, but to the non-stereoselective (tBu)₂PCH₂-transfer to a prochiral keto function of benzil. All adducts of 1 were characterised by means of multinuclear NMR spectroscopy, elemental analyses and X-ray diffraction experiments.     

Determination of trace bismuth by under-potential deposition-stripping voltammetry at mesoporous platinum microelectrodes: application to pharmaceutical products

A methodology for the determination of bismuth, based on under-potential deposition-stripping voltammetry (UPD-SV), was investigated. It makes use of mesoporous platinum microelectrodes (Pt-MEs) prepared by a liquid crystal templating technique. The mesoporous microelectrodes, which are characterised by a very high surface area, allowed the accumulation of relatively large amounts of bismuth at under-potential without saturation of the electrode surface. Calibration plots for quantification of bismuth at micromolar levels were constructed by using the charge involved in either the anodic or cathodic peak recoded by cyclic voltammetry that ensued the accumulation of bismuth at the electrode surface. During the anodic scan, the oxidation of metallic bismuth occurred; the cathodic scan involved irreversibly adsorbed bismuth species, which are retained on to the electrode surface. The reproducibility of the proposed UPD-SV procedure (which was within 5 %) was assured by the application to the Pt-MEs of a suitable potential waveform, properly designed to avoid memory effect due to the irreversibly deposited bismuth. The latter phenomenon along with UPD allowed to overcome interference due to copper, which is normally observed when quantification of bismuth is performed by anodic stripping voltammetry at solid electrodes involving bulk metal deposits. The usefulness of the proposed method for the determination of bismuth in real samples was demonstrated by the analysis of a tablet of a pharmaceutical preparation, which is used for curing ulcers.