Adsorption of carboxymethyl cellulose on polymer surfaces: evidence of a specific interaction with cellulose

The adsorption of carboxymethyl cellulose (CMC), one of the most important cellulose derivatives, is crucial for many scientific investigations and industrial applications. Especially for surface modifications and functionalization of materials, the polymer is of interest. The adsorption properties of CMC are dependent not only on the solutions state, which can be influenced by the pH, temperature, and electrolyte concentration, but also on the chemical composition of the adsorbents. We therefore performed basic investigation studies on the interaction of CMC with a variety of polymer films. Thin films of cellulose, cellulose acetate, deacetylated cellulose acetate, polyethylene terephthalate, and cyclo olefin polymer were therefore prepared on sensors of a QCM-D (quartz crystal microbalance) and on silicon substrates. The films were characterized with respect to the thickness, wettability, and chemical composition. Subsequently, the interaction and deposition of CMC in a range of pH values without additional electrolyte were measured with the QCM-D method. A comparison of the QCM-D results showed that CMC is favorably deposited on pure cellulose films and deacetylated cellulose acetate at low pH values. Other hydrophilic surfaces such as silicon dioxide or polyvinyl alcohol coated surfaces did not adsorb CMC to a significant extent. Atomic force microcopy confirmed that the morphology of the adsorbed CMC layers differed depending on the substrate. On hydrophobic polymer films, CMC was deposited in the form of larger particles in lower amounts whereas hydrophilic cellulose substrates were to a high extent uniformly covered by adsorbed CMC. The chemical similarity of the CMC backbone seems to favor the irreversible adsorption of CMC when the molecule is almost uncharged at low pH values. A selectivity of the cellulose CMC interaction can therefore be assumed. All CMC treated polymer films exhibited an increased hydrophilicity, which confirmed their modification with the functional molecule.     

Electrical conductivity of poly(ethylene terephthalate)/expanded graphite nanocomposites prepared by in situ polymerization

Nanocomposites based on poly(ethylene terephthalate) (PET) and expanded graphite (EG) have been prepared by in situ polymerization. Morphology of the nanocomposites has been examined by electronic microscopy. The relationship between the preparation method, morphology, and electrical conductivity was studied. Electronic microscopy images reveal that the nanocomposites exhibit well dispersed graphene platelets. The incorporation of EG to the PET results in a sharp insulator‐to‐conductor transition with a percolation threshold (?_c) as low as 0.05 wt %. An electrical conductivity of 10^?3 S/cm was achieved for 0.4 wt % of EG. The low percolation threshold and relatively high electrical conductivity are attributed to the high aspect ratio, large surface area, and uniform dispersion of the EG sheets in PET matrix. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Interaction between model poly(ethylene terephthalate) thin films and weakly ionised oxygen plasma

Model films of poly(ethylene terephthalate) were treated by oxygen plasma in order to quantify the etching rate and estimate the contribution of charged and neutral particles to the reaction probability. Model films with a thickness of 50 nm were deposited on a quartz crystal of a microbalance (QCM) by spin‐coating technique. The samples were exposed to oxygen plasma with the positive ion density of 4 × 10¹⁵ m^?3 and neutral oxygen atom density of 6 × 10²¹ m^?3. The etching rate was determined from the QCM signal and was 4.7 nm s^?1. The etching was found rather inhomogeneous as the atomic force microscopic images showed an increase of the surface roughness as a result of plasma treatment. The model films were completely removed from the surface of the quartz crystals in about 12 s. Knowing the etching rate and the flux of oxygen atoms to the surface allowed for calculation of the reaction probability which was found to be rather low at the value of 1.6 × 10^?4. Copyright © 2011 John Wiley & Sons, Ltd.     

π‐Electron currents in larger fully aromatic benzenoids

Recently, we have reported on calculation of π‐electron ring currents in several smaller fully benzenoid hydrocarbons having up to eight fused benzene rings and five Clar π‐aromatic sextets. In contrast to early HMO ring current calculations and more recent ab initio calculations of π‐electron density, our current calculations are based on a graph theoretical model in which contributions to ring currents comes from currents associated with individual conjugated circuits. In this contribution, we consider several larger fully benzenoid hydrocarbons having from 9 to 13 fused rings and from six or seven π‐aromatic sextets. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Antimicrobial cotton fibres prepared by in situ synthesis of AgCl into a silica matrix

Functional antimicrobial cotton fibres were prepared in a novel two-step procedure utilising the pad-dry-cure method to apply an inorganic–organic hybrid sol–gel precursor (reactive binder, RB) followed by the in situ synthesis of AgCl particles on the RB-treated fibres. The morphology and surface composition of the modified cotton fibres were investigated by scanning electron microscopy imaging and X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy spectral analyses. The bulk concentration of Ag on the cotton fibres was determined by inductively coupled plasma mass spectroscopy, and the antimicrobial activity against the bacteria Escherichia coli and Staphylococcus aureus was estimated according to the ISO 20645:2004 (E) and AATCC 100-1999 methods. The results showed that this application process yields the following important benefits: (1) the presence of the RB silica matrix increased the fibres’ capacity for adsorbing AgCl particles compared with the same fibres without RB; (2) the in situ synthesis enabled a simple and environmentally friendly preparation of AgCl particles from AgNO₃ and their embedment into the fibres; (3) the AgCl particles were bound to the RB silica matrix by physical forces, which allowed for their controlled release from the fibres; (4) the capacity of the RB-modified cotton samples to hold embedded AgCl particles was sufficient to provide a 100 % bacterial reduction even after 10 repeated washing cycles; and (5) the chemical modification of the cotton fibres did not significantly change their whiteness, wettability or softness.     

Adamantyl-β-butyrolactones: synthesis and ring-opening reactions

2-(1-Adamantyl)-β-butyrolactones 3a and 3b were synthesized using very common peptide coupling reagents under mild conditions and their ring-opening reactions were then studied. These novel lactones showed pronounced stability and were resistant to cleavage upon acidic water extraction and column chromatographic purification. The adamantane moiety plays an important function in lowering the lactone reactivity by protecting the electrophilic sites on the four membered ring via steric hindrance. However under certain conditions, both O–C(carbonyl) and O–C(alkyl) bond-cleavage ring-opening reactions were observed. Bond-cleavage at physiological temperature makes these novel lactones especially noteworthy. Novel adamantyl-β-butyrolactones have a potential to act as biomembrane soluble amphiphiles that might exhibit a combination of stability and biological activity with the latter hopefully predominating.     

Synthesis of waterborne acrylic/clay nanocomposites by controlled surface initiation from macroinitiator modified montmorillonite

The nitroxide mediated controlled surface initiated polymerization of methyl methacrylate (MMA)/butyl acrylate (n-BA) was carried out with a macroinitiator modified montmorillonite. The macroinitiator was synthesized by the nitroxide mediated polymerization of vinylbenzyl trimethylammonium chloride (VBTMACl), methylmethacrylate (MMA) and styrene (S) at 90 °C using BlocBuilder®. The macroinitiator was exchanged with the sodium cations of the montmorillonite, to yield surface modified reactive montmorillonite. The bulk polymerizations of BA/MMA from the clay surface produced controlled molecular weight polymers that were able to exfoliate the clay. This controlled polymer/clay nanocomposite was used as masterbatch and further dispersed in monomers and miniemulsified to perform miniemulsion polymerization of BA/MMA (90/10 wt.%) at 30 wt.% solids content at low emulsifier concentration. The adhesive properties of the nanocomposites prepared with the masterbatch were proved to be better than those prepared with an organically modified clay.     

Synthesis of novel azanorbornylpurine derivatives

Azanorbornylpurine derivatives were prepared by Mitsunobu reaction of appropriate hydroxyazanorbornane derivative with 6-chloropurine or construction of purine base at azanorbornylamines. The prepared target compounds were evaluated for antiviral activity and effect on neuronal and muscle nicotinic acetylcholine receptors.     

1,3-Dipolar cycloadditions of new 2,5-bifunctionalized five-membered cyclic nitrones

A new family of five-membered cyclic nitrones bearing functional groups at positions 2 and 5 were tested in 1,3-cycloadditions with various dipolarophiles. These reactions gave the corresponding cycloadducts as single diastereomers in high yields. The reaction scope was examined, 23 compounds were isolated and fully characterized. The comparison of the reactivity was carried out by a study of reaction conversions while different nitrones or dipolarophiles were used. In addition, the exceptional reactivity of nitrone bearing benzylamino group in position 2 was studied. The formation of the nitrone complex and evaluation of its reactivity in 1,3-DC is presented.     

Determination of Low Contents of Fenpiverine Bromide by Extraction Spectrophotometry

An ion-pair extraction spectrophotometry method was developed for the determination of fenpiverine bromide in tablets. To determine this substance it was necessary to find experimental conditions that would allow eliminating the influence of other components of the tablets. Attention was paid to the fact that a suitable pH of water phase was necessary to achieve high selectivity.Received December 11, 2002; accepted April 24, 2003 Published online July 28, 2003