DCE-MRI定量参数对子宫内膜癌的诊断价值及与临床病理因素的相关性

本文选取了子宫内膜癌患者108例作为观察组,另选取子宫内膜良性病变患者105例作为对照组,均行DCE-MRI检查后发现,观察组容量转移常数(Ktrans)、速率常数(Kep)、血管外细胞外间隙容积比值(Ve)高于对照组(P＜0.05);Ktrans、Kep、Ve值联合诊断子宫内膜癌的曲线下面积(AUC)为0.841;K...     

Faster Sickling Kinetics and Sickle Cell Shape Evolution during Repeated Deoxygenation and Oxygenation Cycles

Experimental Mechanics - Kinetics of cell sickling and morphological change have been recognized as important parameters that are correlated closely with altered blood rheology and vasoocclusion in...     

Target Design of Novel Histone Deacetylase 6 Selective Inhibitors with 2-Mercaptoquinazolinone as the Cap Moiety

Epigenetic alterations found in all human cancers are promising targets for anticancer therapy. In this sense, histone deacetylase inhibitors (HDACIs) are interesting anticancer agents that play an important role in the epigenetic regulation of cancer cells. Here, we report 15 novel hydroxamic acid-based histone deacetylase inhibitors with quinazolinone core structures. Five compounds exhibited antiproliferative activity with IC₅₀ values of 3.4–37.8 µM. Compound 8 with a 2-mercaptoquinazolinone cap moiety displayed the highest antiproliferative efficacy against MCF-7 cells. For the HDAC6 target selectivity study, compound 8 displayed an IC₅₀ value of 2.3 µM, which is 29.3 times higher than those of HDAC3, HDAC4, HDAC8, and HDAC11. Western blot assay proved that compound 8 strongly inhibited tubulin acetylation, a substrate of HDAC6. Compound 8 also displayed stronger inhibition activity against HDAC11 than the control drug Belinostat. The inhibitory mechanism of action of compound 8 on HDAC enzymes was then explored using molecular docking study. The data revealed a high binding affinity (−7.92 kcal/mol) of compound 8 toward HDAC6. In addition, dock pose analysis also proved that compound 8 might serve as a potent inhibitor of HDAC11.     

Effect of CeO2 preparation method and Cu loading on CuO/CeO2 catalysts for methane combustion

CeO2 was synthesized by sol-gel, hydrothermal, nitrate thermal decomposition methods, respectively, and used as support to prepare CuO/CeO2 catalysts. According to characterization and reaction results, preparation method of CeO2 had a great influence on the physicochemical properties and activities of CuO/CeO2 catalysts. CuO with high dispersion and strong interaction with CeO2 was highly active in methane combustion, while CuO particles less associated with CeO2 showed less activity. The CuO catalyst supported on CeO2 which was prepared via nitrate thermal decomposition method showed the largest area, the smallest particle size, the highest dispersion of copper species and strong support metal interactions. Therefore, it presented the highest redox ability and activity for methane combustion. Activities of the catalysts with different copper content kept increasing until 5% Cu loading and from then on kept constant. Moreover, methane conversion decreased as methane space velocities increased on CuO/CeO2 catalyst. Addition of CO2 to the feed did not produce a significant effect on the catalytic activity, but the presence of H2O provoked a remarkable decrease on the activity of CuO/CeO2 catalyst.     

Effect of water on the performance of Pd-ZSM-5 catalysts for the combustion of methane

Palladium-based catalysts were prepared using impregnation （I） and ion-exchange method （E） with ZSM-5 as support. Pd-ZSM-5（I） and Pd-ZSM-5（E） catalysts presented the high activity for the combustion of methane. The order of activity was consistent with Brcnsted acidity of the catalysts： Pd-ZSM-5（I）〉Pd-ZSM-5（E）. It was shown by FT-IR that methane was adsorbed on the acidic bridging hydroxyl groups of ZSM-5-supported Pd catalysts. The effect of water on the activity of Pd-ZSM-5 was investigated. The inhibition effect of water on the conversion of methane was observed. However, water promoted the stability of Pd-ZSM-5 obviously during extended time periods. XPS measurement showed that Pd/Si ratio near the surface of Pd-ZSM-5（E） decreased more pronouncedly with time in dry stream than that of Pd-ZSM-5（I）, this is attributed to the dispersion of Pd into the micropores. The addition of water, however, retarded Pd dispersion. And high partial pressure of methane reduced this effect of water vapor. The decrease in activity during the stability test can be explained on the basis of the reduction of Pd/Si ratio.     

电化学溶解金属铜制备纳米CuO

有机电解合成;铜电极;水解;电化学溶解金属铜制备纳米CuO     

N-取代环十二酮缩氨基硫脲的氧化环合反应

以环十二酮为起始物合成的一系列N-取代环十二酮缩氨基硫脲(Ⅰ)经二氧化锰氧化环合为2-(1,11-十一亚甲基)-5-取代亚氨基-△^3-1,3,4-噻二唑啉(Ⅱ)。Ⅱ的结构得到IR,13^CNMR和元素分析的确证。反应中同时分离到一个副产物,经IR,13^CNMR,EIMS和元素分析确定其结构为2-(1,11-十一亚甲基)-5-亚氨基△^3-1,3,4-噻二唑啉(Ⅲ)。据此提出了Ⅰ经二氧化锰氧化环合为Ⅱ的两步反应机制,此机制可以合理地解释Ⅱ和Ⅲ的生成。     

超疏水多孔阵列碳纳米管薄膜

碳纳米管由于具有特异的力学[1] 、光学[2 ] 、电学[3,4 ] 和磁学性质[5] ,使其在锂离子电池[6 ] 和平板展示器[7] 等方面呈现出广泛的应用前景 .Ebbesen等[8] 对无序碳纳米管材料的浸润性进行了详细研究 ,发现其很容易被水润湿 .然而 ,阵列碳纳米管膜的浸润性研究尚未见报道 .固体表面的浸润性主要由表面化学组分和几何结构两方面控制 .通常 ,加大表面粗糙度可以增强其浸润性 [9～ 16 ] .近来 ,超疏水表面 (即与水的接触角大于 1 5 0°的表面 )的研究显示了广泛的应用背景[13～ 16 ] .这种表面通常可由增加表面粗糙度和降低表面能来制备[1…     

Effect of aromatic substitution on the cure reaction and network properties of anhydride cured triphenyl ether tetraglycidyl epoxy resins

A systemic study of the impact of aromatic substitution on the reaction rate and network properties of the isomers of a tetraglycidylaniline triphenyl ether epoxy resin cured with anhydride hardeners is presented here. The epoxy resins synthesized in this work were based upon N,N,N,N‐tetraglycidyl bis(aminophenoxy)benzene (TGAPB), where the glycidyl aniline and ether groups change from being all meta (133 TGAPB), to meta and para (134 TGAPB), and finally to an all para substituted epoxy resin (144 TGAPB). Increasing para substitution increased reaction rate, promoted the onset of vitrification and increased epoxide conversion. Thermal properties such as glass transition temperatures (T_g) and coefficients of thermal expansion (CTE) both increased consistently with increasing para substitution, although thermal stability as measured via thermogravimetric analysis decreased. Mechanical properties also varied systematically with flexural strength and ductility increasing with increased para substitution, while the modulus decreased. Indeed, the ductility almost doubled, as measured by the work of fracture and displacement at failure highlighting the importance of substitution on properties.     

Synthesis,Structures, and Fluorescent Properties of Three Cobalt‐Based Coordination Polymers with a Rigid Tripodal Carboxylate Ligand

Three cobalt(II) coordination polymers, [Co₂(tatb)₂(2,2′‐bipy)₂ (H₂O)₂ · DMA · 2H₂O] ( 1 ), [Co₂(tatb)₂(1,10‐phen)₂(H₂O)₂ · 2H₂O] ( 2 ) and [Co(tatb)(1,3‐dpp) · H₂O] ( 3 ) (H₃tatb = 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid; 2,2′‐bipy = 2,2′‐bipyridyl; 1,10‐phen = 1,10‐phenanthroline; 1,3‐dpp = 1,3‐bis(pyridin‐4‐yl)propane), were synthesized solvothermally and characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as IR spectroscopy. Complexes 1 and 2 exhibit 1D double‐chain structures, which further connect into interesting 3D networks by hydrogen bond and strong π–π interactions. Complex 3 possesses 2D 4⁴‐sql topology, which is packed parallel in an AA fashion. Moreover, thermal stability properties and photoluminescence properties of 1 , 2 and 3 were also investigated.