Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4'-cyanobiphenyl (8CB) or 4- n -pentyl-4"-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Analytical Strategy for the Determination of Selenium in Biological Materials by Inductively Coupled Plasma-Mass Spectrometry with a Dynamic Reaction Cell

Selenium was determined in serum, hair, and tobacco by inductively coupled plasma-mass spectrometry using ⁷⁷Se, ⁷⁸Se, and ⁸²Se. The set of standards method (SSM) and the standard addition method (SAM) were applied to calibration with and without the use of internal standards (⁷²Ge and ¹⁰³Rh). In addition, the usefulness of the dynamic reaction cell (DRC) with methane as the reaction gas was characterized. The results obtained in different conditions were evaluated in terms of precision and accuracy. It was demonstrated theoretically and experimentally that an internal standard is a potential source of systematic errors as it can be influenced multiplicatively and additively by its own interferents (independently of selenium). Furthermore, it was shown that—against common opinion—an internal standard can fail in elimination of chemical interference effects influencing selenium and in increasing of precision of selenium determinations. The DRC was shown to be effective in the elimination of additive effects, although the results obtained by both SSM and SAM with DRC were systematically positively erroneous. Finally, selenium was determined accurately in each examined sample when SAM was applied to calibration, and signals were measured either for ⁸²Se without the use of the DRC, or for ⁷⁷Se or ⁷⁸Se with the use of the DRC. In addition, it has also been shown that samples should be diluted prior to analysis to the greatest acceptable extent.     

Solvent extraction of Cu,Mo, V,and U from leach solutions of copper ore and flotation tailings

A micro-cloud point extraction method was discussed for preconcentration and spectrophotometric quantification of U(VI). The method depends on complex formation between U(VI) and 2-(4-sulphophenyloazo)-1,8-dihydroxy-3,6-naphtalenedisulphonic acid (SPADNS) at pH 7.0 and subsequent extraction of the complex in a mixed surfactant medium (cethyltrimethyl ammonium bromide and Triton X-114). The separation was carried out in the presence of 1% Na₂SO₄ at room temperature. The calibration curve was linear up to 3000 µg L^?1. The enrichment factor, detection limit and precision were 16.0, 1.05 µg L^?1, and 2.3%, respectively. The method was employed for the determination of U(VI) in real samples with different matrices.     

Application of carbon nanotubes as solid-phase extraction sorbent for analysis of chlorophenols in water samples

The aim of this work was to investigate the efficiency of various MWCNTs as SPE materials for the preconcentration of chlorophenols. The COOH-functionalized MWCNTs and MWCNTs were used as SPE sorbents. To evaluate the capability of MWCNTs for the preconcentration of chlorophenols from water samples, 2,4-chlorophenol, 4-chlorophenol, 2,4,6-chlorophenol, 2,6-chlorophenol, 3,4-chlorophenol, and 2-chlorophenol were used as model compounds. Chlorophenols were extracted with acetone, methanol, ethanol, and dichloromethane, and determined by gas chromatography–mass spectrometry. COOH-functionalized MWCNTs <8 nm were found to be the best sorbent for the tested chlorophenols. For COOH-functionalized MWCNTs <8 nm, the recovery rates for all chlorophenols were higher than 50% when acetone or ethanol was used as eluents. In the case of dichloromethane elution, recovery rates for chlorophenols were from 62.0% for 2,6-DCP to 116.8% for 2,4-DCP; only for 2,4,6-TCP was the recovery rate 30.6%. Similar percentage recoveries were achieved with methanol as the eluent.     

Synthesis and Sm/Sm doping effects on photoluminescence properties of Sr4Al14O25

Complete and partial samarium reduction was achieved under strong reducing atmosphere by solid-state and combustion synthesis of Sr_3.96Sm_0.04Al₁₄O₂₅. Dependence of different fluxing agents on the formation of various strontium aluminates was examined. The samples were investigated by X-ray powder diffraction, temperature dependent luminescence decay and photoluminescence measurements. Excitation with UV radiation resulted in sharp and well resolved emission lines of samarium ions. Distinct temperature behavior for Sm²⁺ and Sm³⁺ were detected in the range of 100-500 K. Estimated emission thermal quenching values (TQ_1/2) for divalent samarium were approximately 270 K while for trivalent state around 660 K. Measured luminescence decay values of Sm²⁺ are substantially lower than for Sm³⁺,≈1.7 and ≈2.7 ms, respectively. The spectral feature of Sm²⁺ emission spectrum indicates that dopant occupies low symmetry site in Sr₄Al₁₄O₂₅ compound.     

POLARIZED TIME-RESOLVED FLUORESCENCE SPECTRA OF PHYCOBILISOMES ISOLATED FROM Tolypothrix tenuis EMBEDDED IN POLY(VINYL ALCOHOL) FILM

–Time-resolved fluorescence spectra in the ps time range were measured on phycobilisome (PBS) embedded in poly(vinyl alcohol) films. The cyanobacterium Tolypothrix tenuis was used as a source of PBS because the pigment composition and the structure of the PBS are well defined. Isotropic PBS in the unstretched film and PBS uniaxially oriented in the stretched film were investigated. Diameters of PBS hemidiscs were oriented parallel to the film-stretching direction. The time-resolved fluorescence spectra of the unstretched sample and of the two polarized components in the stretched samples showed several differences in the rise and decay. The delay time, estimated from the time span between the maximum laser pulse and maximal intensity of the phycocyanin and allophycocyanin fluorescence, was much longer than that reported in the aqueous media. This suggests occurrence of a higher thermal deactivation of PBS in polymer film than in aqueous media. The excitation energy transfer from excited phycocrythrin to allophycocyanin was more efficient in the unstretched than in the stretched samples, and it was greater in the parallel polarized component of the stretched sample than in the perpendicular component. The present results are in agreement with a previous suggestion which states that there are two independent pathways of excitation energy transfer in PBS and that there is more than one final emitter of fluorescence. The molecules taking part in various pathways of energy transfer differ in their orientation within PBS.     

Simultaneous determination of Cd,Cr, Cu,Ni, Pb and Zn in sewage sludge by slurry introduction ICP-OES method

In order to evaluate the slurry nebulisation method as an alternative method for analysis of sewage sludge, the metal content of sludge samples of different origins was determined. The concentrations of six elements: Cd, Cr, Cu, Ni, Pb, and Zn were determined by introducing the sludge as a slurry into an inductively coupled plasma optical emission spectrometer (ICP-OES). Calibration was performed by using aqueous standard solutions. For comparison, the sewage sludge was also digested by microwave digestion and introduced into the plasma as an aqueous solution. The accuracy of the method was checked by analysing a sewage sludge certified reference material (CRM 007-040 Sewage Sludge). The Student's t-test showed that values obtained using slurry nebulisation were close to the certified values at a 95% confidence level. The values of elements Cd 11.1?±?0.8; Cr 37.7?±?3.3; Cu 563.3?±?38.4; Pb 119.2?±?10.1; Zn 729?±?68.2?mg?kg^?1 obtained using this method were comparable with those obtained using the conventional method. The slurry method can, therefore, be successfully applied to the determination of content of each element in sewage sludge with RSD less than 3%, without the need to predissolve them. This could avoid the use of hazardous chemicals, incomplete dissolution and loss of volatile analytes.     

Correction to: Foreword to the memorial issue for Professor Roberto Marassi

Journal of Solid State Electrochemistry -