Analytical Strategy for the Determination of Selenium in Biological Materials by Inductively Coupled Plasma-Mass Spectrometry with a Dynamic Reaction Cell

Selenium was determined in serum, hair, and tobacco by inductively coupled plasma-mass spectrometry using ⁷⁷Se, ⁷⁸Se, and ⁸²Se. The set of standards method (SSM) and the standard addition method (SAM) were applied to calibration with and without the use of internal standards (⁷²Ge and ¹⁰³Rh). In addition, the usefulness of the dynamic reaction cell (DRC) with methane as the reaction gas was characterized. The results obtained in different conditions were evaluated in terms of precision and accuracy. It was demonstrated theoretically and experimentally that an internal standard is a potential source of systematic errors as it can be influenced multiplicatively and additively by its own interferents (independently of selenium). Furthermore, it was shown that—against common opinion—an internal standard can fail in elimination of chemical interference effects influencing selenium and in increasing of precision of selenium determinations. The DRC was shown to be effective in the elimination of additive effects, although the results obtained by both SSM and SAM with DRC were systematically positively erroneous. Finally, selenium was determined accurately in each examined sample when SAM was applied to calibration, and signals were measured either for ⁸²Se without the use of the DRC, or for ⁷⁷Se or ⁷⁸Se with the use of the DRC. In addition, it has also been shown that samples should be diluted prior to analysis to the greatest acceptable extent.     

Solvent extraction of Cu,Mo, V,and U from leach solutions of copper ore and flotation tailings

A micro-cloud point extraction method was discussed for preconcentration and spectrophotometric quantification of U(VI). The method depends on complex formation between U(VI) and 2-(4-sulphophenyloazo)-1,8-dihydroxy-3,6-naphtalenedisulphonic acid (SPADNS) at pH 7.0 and subsequent extraction of the complex in a mixed surfactant medium (cethyltrimethyl ammonium bromide and Triton X-114). The separation was carried out in the presence of 1% Na₂SO₄ at room temperature. The calibration curve was linear up to 3000 µg L^?1. The enrichment factor, detection limit and precision were 16.0, 1.05 µg L^?1, and 2.3%, respectively. The method was employed for the determination of U(VI) in real samples with different matrices.     

Application of carbon nanotubes as solid-phase extraction sorbent for analysis of chlorophenols in water samples

The aim of this work was to investigate the efficiency of various MWCNTs as SPE materials for the preconcentration of chlorophenols. The COOH-functionalized MWCNTs and MWCNTs were used as SPE sorbents. To evaluate the capability of MWCNTs for the preconcentration of chlorophenols from water samples, 2,4-chlorophenol, 4-chlorophenol, 2,4,6-chlorophenol, 2,6-chlorophenol, 3,4-chlorophenol, and 2-chlorophenol were used as model compounds. Chlorophenols were extracted with acetone, methanol, ethanol, and dichloromethane, and determined by gas chromatography–mass spectrometry. COOH-functionalized MWCNTs <8 nm were found to be the best sorbent for the tested chlorophenols. For COOH-functionalized MWCNTs <8 nm, the recovery rates for all chlorophenols were higher than 50% when acetone or ethanol was used as eluents. In the case of dichloromethane elution, recovery rates for chlorophenols were from 62.0% for 2,6-DCP to 116.8% for 2,4-DCP; only for 2,4,6-TCP was the recovery rate 30.6%. Similar percentage recoveries were achieved with methanol as the eluent.     

Solid state NMR spectroscopy as a precise tool for assigning the tautomeric form and proton position in the intramolecular bridges of o-hydroxy Schiff bases

Two analogous Schiff bases, (S,E)-2-((1-hydroxy-3-methyl-1,1-diphenylbutan-2-ylimino)methyl)phenol (1) and (S,Z)-2-hydroxy-6-((1-hydroxy-3-methyl-1,1-diphenylbutan-2-ylamino)methylene)cyclohexa-2,4-dienone (2), exist in the solid state as phenol-imine and keto-amine tautomers, respectively. Their crystal structures were solved using the X-ray diffraction method. Sample 1 forms orthorhombic crystals of space group P2(1)2(1)2(1), while 2 forms monoclinic crystals of space group P2(1). In each sample, one molecule is in the asymmetric unit of the crystal structure. One-dimensional and two-dimensional solid state NMR techniques were used for structure assignment and for inspection of the (13)C and (15)N δ(ii) of the chemical shift tensor (CST) values. NMR study indicates that the span (Ω = δ(11)-δ(33)) and the skew (κ = 3(δ(22)-δ(iso)/Ω) are extremely sensitive to change in the tautomeric form of the Schiff bases. Theoretical calculations of NMR shielding parameters for 1 and 2 and a model compound with reduced aliphatic residue were performed using the GIAO method with B3LYP functional and 6-311++g(d,p) basis sets. From comparative analysis of the experimental and theoretical parameters, it was concluded that the position of hydrogen in the intramolecular bridge has tremendous influence on (13)C and (15)N CST parameters. Inspection of Ω and κ parameters allowed for the establishment of the nature of the hydrogen bonding and the assignment of the equilibrium proton position in the intramolecular bridges in the solid state.     

Synthesis and Sm/Sm doping effects on photoluminescence properties of Sr4Al14O25

Complete and partial samarium reduction was achieved under strong reducing atmosphere by solid-state and combustion synthesis of Sr_3.96Sm_0.04Al₁₄O₂₅. Dependence of different fluxing agents on the formation of various strontium aluminates was examined. The samples were investigated by X-ray powder diffraction, temperature dependent luminescence decay and photoluminescence measurements. Excitation with UV radiation resulted in sharp and well resolved emission lines of samarium ions. Distinct temperature behavior for Sm²⁺ and Sm³⁺ were detected in the range of 100-500 K. Estimated emission thermal quenching values (TQ_1/2) for divalent samarium were approximately 270 K while for trivalent state around 660 K. Measured luminescence decay values of Sm²⁺ are substantially lower than for Sm³⁺,≈1.7 and ≈2.7 ms, respectively. The spectral feature of Sm²⁺ emission spectrum indicates that dopant occupies low symmetry site in Sr₄Al₁₄O₂₅ compound.     

Structure of the O-Specific Polysaccharide of Hafnia Alvei 23 Having an Oligosaccharide-Phosphate Repeating Unit

ABSTRACT

Lipopolysaccharide (LPS) of Hafnia alvei 23 has an acid-labile O-specific polysaccharide (OPS) with a pentasaccharide-phosphate repeating unit containing D-Glc1P, D-GlcNAc, L-Fuc, 6-deoxy-D-talose (D-6dTal), 4-acetamido-4,6-dideoxy-D-glucose (D-Qui4NAc), and an O-acetyl group. A partially degraded OPS was obtained by hydrolysis of LPS with 0.25 M sodium acetate in aqueous 0.5% acetic acid. Fractionation of LPS on Sephadex G-200 in DOC buffer allowed isolation of long-chain LPS species which, together with OPS, were studied by methylation analysis, chemical degradations (O-deacetylation, dephosphorylation with 48% hydrofluoric acid, Smith degradation), and ¹H and ¹³C NMR spectroscopy, including 2D COSY, TOCSY, NOESY, and H-detected ¹H,¹³C heteronuclear single-quantum coherence (HSQC) experiments. The following structure of the repeating unit of OPS was established:     

Reliability in reconstruction of the axisymmetric refractive index profiles from transverse interferograms. Accurate versus approximate methods: A comparative study

A mathematical formalism related to the approximate as well as the accurate interferometric data reduction schemes is briefly outlined and subsequently applied in the reconstruction of the assumed (Luneburg) axisymmetric refractive index distribution. The presented comparative analysis confirms the generally held opinion that the approximate methods (“straight-line” and Kokubun-Iga approaches) may provide quite reasonable results in the examination of refractively inhomogeneous disturbances characterized by weak gradient and moderate index variation. On the other hand, the accurate scheme for transverse interferometric data interpretation and reduction, based on the close-form correlation between the fringe shift and the deflection function, [1] remains the only method for reliable reconstruction of strongly refracting index profiles, independently of magnitude of refraction and ambiguity of the fringes. This fact is of considerable importance for transverse interferometry of fibers (preform rods) and/or GRIN-rod lenses characterized by high numerical apertures.     

Use of RP-TLC and Theoretical Computational Methods to Compare the Lipophilicity of Phenolic Drugs

JPC – Journal of Planar Chromatography – Modern TLC - The chromatographic behavior of the phenolic drugs niclosamide, hexachlorophene, ibuprofen, pentazocine, ethamivan, bithionol,...