Reactivity of dioxoruthenium(VI) porphyrins toward amines. Synthesis and characterization of bis(arylamine)ruthenium(II), bis(arylamido)- and bis(diphenylamido)ruthenium(IV), and oxo(tert-butylimido)ruthenium(VI) porphyrins

Reactions of dioxoruthenium(VI) porphyrins, [Ru(VI)O2(Por)], with p-chloroaniline, trimethylamine, tert-butylamine, p-nitroaniline, and diphenylamine afforded bis(amine)ruthenium(II) porphyrins, [Ru(II)(Por)(L)2] (L-p-ClC6H4NH2, Me3N, Por=TTP, 4-Cl-TPP; L=tBuNH2, Por = TPP, 3,4,5-MeO-TPP, TTP, 4-Cl-TPP, 3,5-Cl-TPP) and bis(amido)ruthenium(IV) porphyrins, [Ru(IV)(Por)(X)2] (X=p-NO2C6H4NH, Por=TTP, 4-Cl-TPP; X = Ph2N, Por = 3,4,5-MeO-TPP, 3,5-Cl-TPP), respectively. Oxidative deprotonation of [Ru(II)(Por)(NH2-p-C6H4Cl)2] in chloroform by air generated bis(arylamido)ruthenium(IV) porphyrins, [RuIV(Por)(NH-p-C6H4Cl)2] (Por=TTP. 4-Cl-TPP). Oxidation of [RuII(Por)-(NH2tBu)2] by bromine in dichloromethane in the presence of tert-butylamine and traces of water produced oxo(imido)ruthenium(VI) porphyrins, [RuVI-O(Por)(NtBu)] (Por=TPP, 3,4,5-MeO-TPP, TTP, 4-Cl-TPP, 3,5-Cl-TPP). These new classes of ruthenium complexes were characterized by 1H NMR, IR, and UV/visible spectroscopy, mass spectrometry, and elemental analysis. The structure of [Ru(IV)(TTP)(NH-p-C6H4Cl)2 . CH2Cl2 was determined by X-ray crystallography. The Ru-N bond length and the Ru-N-C angle of the Ru-NHAr moiety are 1.956(7) A and 135.8(6) degrees, respectively.     

Dioxomolybdenum(VI) Complexes with New Enantiomerically Pure Amino Diol Ligands

(R)-Phenylglycinol is shown to be an efficient building block for the synthesis of chiral amino diols in pure diastereomeric form by epoxide ring-opening reactions. The reaction with rac-trans-stilbene oxide gives [HOCH(2)-(R)-PhCH]NH[(S)-PhCH-(R)-PhCHOH] [2(R)-3(R)-4(S)-HNO(2)H(2)] in 32% yield, which can be methylated at nitrogen to give enantiomerically pure [HOCH(2)-(R)-PhCH]NCH(3)[(S)-PhCH-(R)-PhCHOH] [2(R)-3(R)-4(S)-MeNO(2)H(2)]. These amino diol ligands have been used to prepare chiral dioxomolybdenyl complexes of the formula N(R)-2(R)-3(R)-4(S)-(HNO(2))MoO(2) (1) and N(R)-2(R)-3(R)-4(S)-(MeNO(2))MoO(2) (2). The absolute configuration at each stereocenter in the Mo(VI) complexes has been established by (1)H NOESY spectroscopy. The configuration determined for 1 has been confirmed by an X-ray analysis. Crystal data: orthorhombic P2(1)2(1)2(1), a =7.620(3), b = 13.589(2), c = 20.339(3) ?, Z = 4, R = 0.0336. The structure consists of a polymeric chain of N(R)-2(R)-3(R)-4(S)-(HNO(2))MoO(2) molecules connected through unsymmetrical Mo=O --> Mo bridges. Each metal center is coordinated in a distorted octahedral geometry by a cis dioxo unit and by two trans alkoxo atoms. The coordination polyhedron is completed by a nitrogen atom and by a bridging oxo oxygen atom from an adjacent molecule. Compound 2 catalyzes the oxidation of PPh(3) to OPPh(3) by DMSO through a mechanism that involves the intermediacy of a Mo(IV) species.     

Bis axial ligation of simple imine and methyleneamido groups by ruthenium porphyrins

Bis(N-ethylideneethanamine)ruthenium(ii) porphyrins, [Ru11(Por)(N(Et)=CHMe)2] (Por=TTP, 4-Cl-TPP), were prepared by the reaction of dioxoruthenium(VI) porphyrins with triethylamine in approximately 85% yields. The reaction between dioxoruthenium(VI) porphyrins and benzophenone imine afforded bis(diphenylmethyleneamido)ruthenium(IV) porphyrins, [Ru(IV)(Por)(N=CPh2)2] (Por=TTP, 3,4,5-MeO-TPP), in approximately 65% yields. These new classes of metalloporphyrins were characterized by 1H NMR, UV/Vis, and IR spectroscopy as well as by mass spectrometry and elemental analysis. The X-ray crystallographic structures of [Ru(II)(TTP)(N(Et)=CHMe)2] and [Ru(IV)(3,4,5-MeO-TPP)(N=CPh2)2] revealed an axial Ru-N bond length of 2.115(6) A for the imine complex and 1.896(8) A for the methyleneamido complex. Each of the N=CPh2 axial groups in [Ru(IV)(3,4,5-MeO-TPP)(N=CPh2)2] adopts a linear coordination mode with a corresponding Ru-N-C angle of 175.9(9)degrees. Spectral and structural studies revealed essentially single bonding character for the bis(imine) complexes but a multiple bonding character for the bis(methyleneamido) complexes with respect to their axial Ru-N bonds.     

Optimal post-stratification for the study of the sustainability: An application to the monitoring of diversity in Sierra de Guerrero

The need of designing a monitoring network in Sierra de Guerrero motivated this paper. The study of the effect of deforestation of the forest needs of monitoring in the diversity. A quantitative evaluation of diversity is measured by estimating an index. Commonly the monitoring of biodiversity is based on the periodical selection of samples for evaluating the diversity. We propose to use sample information for determining post strata. They must constitute homogeneous zones in the forest. A stochastic program is developed for determining the post strata to be used for sampling. The procedure seems to be a good alternative with respect to the use of a heuristic procedure. The results presented are based on the data obtained in a research developed at one of the most important forest diversity reservoirs of Mexico     

Intramolecular Nitrene Insertion into Saturated C−H-Bond-Mediated C−N Bond Cleavage of a Coordinated NHC Ligand

Ruthenium(II) complexes bearing a tridentate bis(N-heterocyclic carbene) ligand reacted with iminoiodanes (PhI=NR) resulting in the formation of isolable ruthenium(III)–amido intermediates, which underwent cleavage of a C−N bond of the tridentate ligand and formation of an N-substituted imine group. The Ru^III–amido intermediates have been characterized by ¹H NMR, UV/Vis, ESI-MS, and X-ray crystallography. DFT calculations were performed to provide insight into the reaction mechanism.     

The expected time to end the tug-of-war in a wedge

Using a solution of a nonhomogeneous partial differential equation involving the p-Laplacian, we study the finiteness of the expected time to end the tug-of-war in a wedge.     

Synthesis and proton conductivity of sulfonated,multi‐phenylated poly(arylene ether)s

A series of sterically‐encumbered, sulfonated, poly(arylene ether) copolymers were synthesized and their proton conductivity examined. The series was prepared by copolymerizing a novel monomer, 2″,3″,5″,6″‐tetraphenyl‐[1,1′:4',1″:4″,1″':4″',1″″‐quinquephenyl]‐4,4″″‐diol, with 4,4'‐difluorobenzophenone and bisphenol A. Subsequent sulfonation and solution casting provided membranes possessing ion exchange capacities of 1.9 to 2.7 mmol/g and excellent mechanical properties (Young's modulus, 0.2–1.2 GPa; tensile strength, 35–70 MPa; elongation at break, 62–231%). Water uptake ranged from 34 to 98 wt% at 80 °C/100% RH. Proton conductivities ranged between 0.24 to 16 mS/cm at 80 °C/60% RH, and 3 to 167 mS/cm at 80 °C/95% RH. TEM analysis of the polymers, in the dehydrated state, revealed isolated spherical aggregates of ions, which presumably coalesce when hydrated to provide highly conductive pathways. The strategy of using highly‐encumbered polymer frameworks for the design of mechanically‐robust and dimensionally‐stable proton conducting membranes is demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2579‐2587     

Double‐crosslinked reversible redox‐responsive hydrogels based on disulfide–thiol interchange

We present novel redox‐responsive hydrogels based on poly(N‐isopropylacrylamide) or poly(acrylamide), consisting of a reversible disulfide crosslinking agent N,N′‐bis(acryloyl)cystamine and a permanent crosslinking agent N,N′‐methylenebisacrylamide for microfluidic applications. The mechanism of swelling/deswelling behavior starts with the cleavage and reformation of disulfide bonds, leading to a change of crosslinking density and crosslinking points. Raman and ultraviolet‐visible spectroscopy confirm that conversion efficiency of thiol–disulfide interchange up to 99%. Rheological analysis reveals that the E modulus of hydrogel is dependent on the crosslinking density and can be repeatedly manipulated between high‐ and low‐stiffness states over at least 5 cycles without significant decrease. Kinetic studies showed that the mechanical strength of the gels changes as the redox reaction proceeds. This process is much faster than the autonomous diffusion in the hydrogel. Moreover, cooperative diffusion coefficient (D_coop) indicates that the swelling process of the hydrogel is affected by the reduction reaction. Finally, this reversibly switchable redox behavior of bulky hydrogel could be proven in microstructured hydrogel dots through short‐term photopatterning process. These hydrogel dots on glass substrates also showed the desired short response time on cyclic swelling and shrinking processes known from downsized hydrogel shapes. Such stimuli‐responsive hydrogels with redox‐sensitive crosslinkers open a new pathway in exchanging analytes for sensing and separating in microfluidics applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2590–2601