Thorough evaluation of the validity of conventional enantio-gas chromatography in the analysis of volatile chiral compounds in mandarin essential oil: A comparative investigation with multidimensional gas chromatography

The present research is focused on the determination of the enantiomeric distribution of chiral compounds, contained in mandarin essential oils, by means of conventional chiral gas chromatography with flame ionization detection (enantio-GC-FID); the results attained were compared with those derived from heart-cutting multidimensional GC-mass spectrometry (MDGC/MS), to evaluate the reliability of the monodimensional technique as a tool for quality control. The Deans-switch MDGC system was equipped with two GC ovens, which were connected via a heated transfer line, a flame ionization detector (FID1) in the first dimension and a quadrupole MS as second-dimension detector. The a priori knowledge of potential co-elutions concerning target compounds (an enantiomer and an interfering compound), when using enantio-GC-FID, could enable the use of corrected enantiomer excess values. Correction factors could be calculated through a preliminary GC-FID analysis (using an apolar column), considering the peak areas of the known interferences. The method used for the calculation of a so-called “coelution correction factor” is described, along with some examples.     

A Carbocationic Triarylmethane-Based Porous Covalent Organic Network

A thermally stable carbocationic covalent organic network (CON), named RIO-70 was prepared from pararosaniline hydrochloride, an inexpensive dye, and triformylphloroglucinol in solvothermal conditions. This nanoporous organic material has shown a specific surface area of 990 m² g⁻¹ and pore size of 10.3 Å. The material has CO₂ uptake of 2.14 mmol g⁻¹ (0.5 bar), 2.7 mmol g⁻¹ (1 bar), and 6.8 mmol g⁻¹ (20 bar), the latter corresponding to 3 CO₂ molecules adsorbed per pore per sheet. It is shown to be a semiconductor, with electrical conductivity (σ) of 3.17×10⁻⁷ S cm⁻¹, which increases to 5.26×10⁻⁴ S cm⁻¹ upon exposure to I₂ vapor. DFT calculations using periodic conditions support the findings.     

Least-squares support vector machines and near infrared spectroscopy for quantification of common adulterants in powdered milk

This paper proposes the use of the least-squares support vector machine (LS-SVM) as an alternative multivariate calibration method for the simultaneous quantification of some common adulterants (starch, whey or sucrose) found in powdered milk samples, using near-infrared spectroscopy with direct measurements by diffuse reflectance. Due to the spectral differences of the three adulterants a nonlinear behavior is present when all groups of adulterants are in the same data set, making the use of linear methods such as partial least squares regression (PLSR) difficult. Excellent models were built using LS-SVM, with low prediction errors and superior performance in relation to PLSR. These results show it possible to built robust models to quantify some common adulterants in powdered milk using near-infrared spectroscopy and LS-SVM as a nonlinear multivariate calibration procedure.     

Novel heteroaromatic-based multi-branched dyes with enhanced two-photon absorption activity

The first examples of heterocycle-based multi-branched dyes with efficient two-photon absorption (TPA) activity are reported; the novel chromophores exhibit large TPA cross sections (as high as 1600 x 10(-50) cm4 s photon(-1) molecule(-1), measured with 150 fs laser pulses at 800 nm); a strong cooperative enhancement in the branched systems with respect to the one-dimensional sub-units is found.     

Tuning high-power laser diodes with as much as 0.38 W of power and M(2) = 1.2 over a range of 32 nm with 3-GHz bandwidth

Gain-guided diode lasers usually have emission wavelengths determined by the manufacturing process, with typically 0.5-1-nm bandwidth. Furthermore, their beam quality is rather poor. We show that external cavities allow for tunable narrow-bandwidth operation of gain-guided diode lasers. At the same time the beam quality is drastically improved; almost diffraction-limited light of more than 200 mW has been achieved over the whole tuning range from 910 to 942 nm with narrow bandwidth.     

Synthesis and characterization of (octaaryltetraazaporphyrinato)indium(III) complexes for optical limiting

The preparation of (octaaryltetraazaporphyrinato)indium(III) chlorides [aryl = phenyl (5a), p-tert-butylphenyl (6a), p-(trifluoromethyl)phenyl (7a), m-(trifluoromethyl)phenyl (8a)] and their reactions with aryl Grignard reagents XMgBr to give 5b-8b [X = p-(trifluoromethyl)phenyl] and 5c (R = 3,5-difluorophenyl) are described. The characterization of all compounds by UV-vis, FT-IR, and (1)H and (13)C NMR spectroscopy was performed. The hypsochromic shift of all bands in the absorption spectra of complexes 5a-8a is observed in the sequence 6a < 5a < 7a approximately 8a. This is associated with the increasing electron-withdrawing character of the aryl substituents in the periphery of the tetraazaporphyrin macrocycle. Compounds 8a,b are very good soluble in organic solvents with 8a exhibiting the higher photochemical stability among the various synthesized species. The optical limiting (OL) properties of the complexes have been studied and correlated with the structure of the (tetraazaporphyrinato)indium(III) complexes and the electronic nature of the different substituents. In particular, the OL effect at 532 nm increases on going from the series of compounds 5 to the series 8.     

Thermal,Mechanical and Morphological Properties of Composites Developed from Glycerol and Dicarboxylic Acids Reinforced with Piassava Fiber

Summary: Vegetable fibers are being widely used as reinforcement in polymer composites. These composites can be applied in several fields, such as automotive, packaging and even construction. The polymer matrix used was synthesized from glycerol with phthalic and terephthalic acids in order to open future perspectives in the use of glycerin generated from the production of purified biodiesel. Composites with 2, 5, 10 wt% untreated and treated piassava fiber were obtained. Thermal, morphological and mechanical properties were evaluated. The tensile stress-strain curve of the polyester synthesized and composites was typical of a ductile material. SEM of the surface of fracture showed that the adhesion between fiber and matrix was enhanced after chemical treatment. However, the fiber content was more efficient than the superficial treatment when incorporated into the matrix. Therefore, the material under study is promising for the industrial marketplace, due to its good compatibility with natural fibers.     

Total syntheses of bacillamide C and neobacillamide A; revision of their absolute configurations

The enantiospecific syntheses of both enantiomers of bacillamide C and neobacillamide A are described, along with the measurement of their optical activities, leading to the revision of the proposed absolute configurations of these natural products.