Evaluation of the SEBS copolymer in the compatibility of PP/ABS blends through mechanical,thermal, thermomechanical properties,and morphology

Polypropylene (PP) blends with acrylonitrile-butadiene-styrene (ABS) were prepared using the styrene-ethylene-butylene-styrene copolymer (SEBS) as a compatibilizing agent. The blends were prepared in a co-rotational twin-screw extruder and injection molded. Torque rheometry, Izod impact strength, tensile strength, heat deflection temperature (HDT), differential scanning calorimetry, thermogravimetry, and scanning electron microscopy properties were investigated. The results showed that there was an increase in the torque of PA6/ABS blends with SEBS addition. The PP/ABS/SEBS (60/25/15%) blend showed significant improvement in impact strength, elongation at break, thermal stability, and HDT compared with neat PP. The elastic modulus and tensile strength have not been significantly reduced. The degree of crystallinity and the crystalline melting temperature increased, indicating a nucleating effect of ABS. The PP/ABS blends compatibilized with 12.5% and 15% SEBS presented morphology with well-distributed fine ABS particles with good interfacial adhesion. As a result, thermal stability has been improved over pure PP and the mechanical properties have been increased, especially impact strength. In general, the addition of the SEBS copolymer as the PP/ABS blend compatibilizer has the advantage of refining the blend's morphology, increasing its toughness and thermal stability, without jeopardizing other PP properties.     

An Information-Theoretic Perspective on Proper Quaternion Variational Autoencoders

Variational autoencoders are deep generative models that have recently received a great deal of attention due to their ability to model the latent distribution of any kind of input such as images and audio signals, among others. A novel variational autoncoder in the quaternion domain H, namely the QVAE, has been recently proposed, leveraging the augmented second order statics of H-proper signals. In this paper, we analyze the QVAE under an information-theoretic perspective, studying the ability of the H-proper model to approximate improper distributions as well as the built-in H-proper ones and the loss of entropy due to the improperness of the input signal. We conduct experiments on a substantial set of quaternion signals, for each of which the QVAE shows the ability of modelling the input distribution, while learning the improperness and increasing the entropy of the latent space. The proposed analysis will prove that proper QVAEs can be employed with a good approximation even when the quaternion input data are improper.     

Influence of β-substituents in aldol reactions of boron enolates of β-alkoxy methylketones

Moderate to good levels of substrate-based 1,5-syn-stereocontrol could be achieved in the boron-mediated aldol reactions of β-tert-butyl methylketones with achiral aldehydes, independent of the nature of the β-alkoxy protecting group (P = PMB or TBS). The analysis of the relative energies of the transition structures by theoretical calculations using the density functional B3LYP shows relative energies favoring the corresponding OUT-1,5-SYN transition structures, explaining the observed 1,5-syn stereoinduction.     

A Density Functional Theory Study of Poly (vinyl chloride) (PVC) Free Radical Polymerization

Summary: Quantum chemistry was applied to the free radical polymerization of Vinyl Chloride with the aim of elucidating the reaction kinetics and especially the formation of structural defects and low molecular weight polymer. The radical reactions were studied using the Density Functional Theory. All calculations were performed with B3LYP functionals and in particular the 6-31G(d,p) basis set was selected to evaluate the exchange and correlation energies. The computational method was first validated by predicting the rate constant of the propagation step and comparing the calculated values to experimental ones. Then intramolecular chain transfer, β-scission and branching reactions were also investigated, due to their direct connection with the production of defects in the growing chains. A comparison of the evaluated kinetic constants of such secondary reactions with other computational evaluations and experimental data was finally made.     

One- and two-photon absorption and emission properties of a Zn(II) chemosensor

This paper presents the synthesis and two photon-induced absorption (TPA) properties of a functionalized distyrylbenzene (DSB) 1 containing a tetra-azacyclododecane (cyclen) receptor for Zn(II). The influence of Zn(II) on one- and two-photon absorption characteristics of 1 has been investigated in dimethyl sulfoxide. The experiments show that the TPA action spectrum of uncomplexed 1, at 750 nm employing nanosecond-long excitation pulses, is 5 times more intense than that of the complexed form. This moderate contrast between the bound and unbound species confirms, however, the potential of this design scheme for the development of molecular structures with enhanced sensitivity and contrast to be used as Zn(II) sensors through TPA-induced fluorescence microscopy.     

Distance distributions of short polypeptides recovered by fluorescence resonance energy transfer in the 10 A domain

Fluorescence resonance energy transfer (FRET) between tryptophan (Trp) as donor and 2,3-diazabicyclo[2.2.2]oct-2-ene (Dbo) as acceptor was studied by steady-state and time-resolved fluorescence spectroscopy. The unique feature of this FRET pair is its exceptionally short F?rster radius (10 A), which allows one to recover distance distributions in very short structureless peptides. The technique was applied to Trp-(GlySer)n-Dbo-NH2 peptides with n = 0-10, for which the average probe/quencher distance ranged between 8.7 and 13.7 A experimentally (in propylene glycol, analysis according to wormlike chain model) and 8.6-10.2 A theoretically (for n = 0-6, GROMOS96 molecular dynamics simulations). The larger FRET efficiency in steady-state compared to time-resolved fluorescence experiments was attributed to a static quenching component, suggesting that a small but significant part (ca. 10%) of the conformations are already in van der Waals contact when excitation occurs.     

Synthetic polymers and biomembranes. How do they interact? Atomistic molecular dynamics simulation study of PEO in contact with a DMPC lipid bilayer

The understanding of interactions of poly(ethylene glycol) (PEG) or poly(ethylene oxide) (PEO) with biological interfaces has important technological application in industry and in medicine. In this paper, structural and dynamical properties of PEO at the dimyristoylphospatidylcholine (DMPC) bilayer/water interface have been investigated by molecular dynamics (MD) and steered molecular dynamics (SMD) simulations. The structural properties of a PEO chain in bulk water, at the water/vacuum interface, and in the presence of the membrane were compared with available experimental data. The presence of a barrier for the PEO penetration into the DMPC bilayer has been found. A qualitative estimation of the barrier provided a value equal to approximately 19 kJ/mol, that is, 7 times the value of kT at 310 K.     

ADMM for the SDP relaxation of the QAP

Semidefinite programming, SDP, relaxations have proven to be extremely strong for many hard discrete optimization problems. This is in particular true for the quadratic assignment problem, QAP, arguably one of the hardest NP-hard discrete optimization problems. There are several difficulties that arise in efficiently solving the SDP relaxation, e.g., increased dimension; inefficiency of the current primal–dual interior point solvers in terms of both time and accuracy; and difficulty and high expense in adding cutting plane constraints. We propose using the alternating direction method of multipliers ADMM in combination with facial reduction, FR, to solve the SDP relaxation. This first order approach allows for: inexpensive iterations, a method of cheaply obtaining low rank solutions; and a trivial way of exploiting the FR for adding cutting plane inequalities. In fact, we solve the doubly nonnegative, DNN, relaxation that includes both the SDP and all the nonnegativity constraints. When compared to current approaches and current best available bounds we obtain robustness, efficiency and improved bounds.     

Essential oils of Daucus carota subsp. carota of Tunisia obtained by supercritical carbon dioxide extraction

The essential oils and supercritical CO2 extracts of wild Daucus carota L. subsp. carota from two different sites in Tunisia were investigated. The main components of the essential oil of the flowering and mature umbels with seeds from Sejnane were eudesm-7(11)-en-4-ol (8.2 - 8.5%), carotol (3.5 - 5.2%), sabinene (12.0 -14.5%), a-selinene (7.4 - 8.6) and 11-alpha-(H)-himachal-4-en-1-beta-ol (12.7 - 17.4%), whereas the oils from Tunis were predominantly composed of elemicin (31.5 - 35.3%) and carotol (48.0 - 55.7%). The antimicrobial activity of the essential oils were assayed by using the broth dilution method on Escherichia coli ATCC 35218 and Staphylococcus aureus ATCC 43300, and clinical strains of Candida albicans and C. tropicalis 1011 RM. The MIC values obtained were all > 2.5% (v/v).