Immuno-arrays for multianalyte analysis of chlorotriazines

In this paper, a novel strategy for multicomponent analysis of two classes of pesticides such as triazines (atrazine and simazine) and phenoxyalkanoic acids (2,4-dichlorophenoxy acetic acid (2,4-D), 2,4,5-trichlorophenoxyacetic acid (2,4,5-T), 4-chlorophenoxyacetic acid (CPOAc), phenoxyacetic acid (POAc)) employing immuno-arrays is demonstrated. The approach is based on cross-reactive arrays of specific antibody pairs coupled to chemometric pattern recognition. The monoclonal antibody pairs employed in this work (atrazine-simazine and 2,4-D) are specific towards a set of analytes and preclude a particular set of others present in the sample matrix. Antibody pairs of atrazine, simazine, and 2,4-D are used to discriminate and quantify analyte of interest. Atrazine was quantified in presence of trace concentration of simazine and that of 2,4-D. The combinatorial cross-reactivity of antibody pairs towards simazine, atrazine and 2,4-D is used to distinguish among different classes of analytes and their influence on the signal suppression in immuno-techniques. These sensors exclude recognition by carbamates such as carbaryl and carbofuran.     

The magnetic circular dichroism of five-membered ring heterocycles

The MCD spectra of pyrrole, furan, thiophene, selenophene and teburophene and some of their derivatives are reported and the corresponding energies, oscillator strengths, transition moment directions, and MCD terms are calculated from semi-empirical quantum mechanical calculations hi the π-electron approximation. The MCD spectrum of thiophene is only slightly perturbed by substituents, and this is also expected to be true of the quite similar MCD spectra of selenophene and tellurophene. These molecules can then be classified as “hard” chromophores. On the other hand, pyrrole and furan have different and much weaker MCD spectra which change shape considerably when substituents are introduced. The implications of these observations are further discussed.     

Confined plasmons in nanofabricated single silver particle pairs: experimental observations of strong interparticle interactions

We report on the optical properties of single isolated silver nanodisks and pairs of disks fabricated by electron beam lithography. By systematically varying the disk size and surface separation and recording elastic scattering spectra in different polarization configurations, we found evidence for extremely strong interparticle interactions. The dipolar surface plasmon resonance for polarization parallel to the dimer axis exhibited a red shift as the interdimer separation was decreased; as expected from previous work, an extremely strong shift was observed. The scattering spectra of single particles and pairs separated by more than one particle radius can be well described by the coupled dipole approximation (CDA), where the particles are approximated as point dipoles using a modified dipole polarizability for oblate spheroids. For smaller particle separations (d < 20 nm), the simple dipole model severely underestimates the particle interaction, indicating the importance of multipolar fields and finite-size effects. The discrete dipole approximation (DDA), which is a finite-element method, describes the experimental results well even at d < 20 nm, including particles that have metallic bridges.     

Comprehensive two-dimensional gas chromatography of the 209 polychlorinated biphenyls

Comprehensive two-dimensional gas chromatography (GC x GC) of the 209 polychlorinated biphenyls (CBs) was carried out using a longitudinally modulated cryogenic system (LMCS) and liquid carbon dioxide as cryogen. The effluent from a non-polar column was modulated and further separated on either a polar or a shape-selective second-dimension column. Five GC x GC column combinations were evaluated, with DB-XLB as the first column in each case. DB-XLB separates more congeners than any other GC column currently available. When combined with a biscyanopropyl siloxane (SP-2340 or BPX70) or smectic liquid crystal (LC-50) second-dimension column in a GC x GC system many additional CBs can be separated. In total, 176 and 181 of the 209 congeners were separated (Rs = 0.5) on the column combinations DB-XLB/SP-2340 and DB-XLB/LC-50, respectively. Of the 136 CBs present in any Aroclor mixture at concentrations greater than 0.05% (w/w), 126 were resolved using either of these two column combinations. The seven frequently measured CBs 28, 52, 101, 118, 138, 153, 180, and the WHO-PCBs 77, 81, 105, 114, 118, 123, 126, 156. 157, 167, 169 and 189 were all separated from Aroclor CBs on the DB-XLB/LC-50 column set, whereas CBs 118 and 131 coeluted on the DB-XLB/SP-2340 column set. In addition, three technical CB formulations (Aroclors 1232, 1248 and 1260) and a seal blubber sample (Halichoerus grypus) from the Baltic Sea were analyzed. Similar peak patterns were found for Aroclor 1260 and the CBs in the seal blubber, facilitating use of this technical CB formulation to identify the CBs in the blubber by GC x GC. Individual CBs in environmental samples, such as seal blubber, may be identified semi-automatically by matching the samples GC x GC profiles to a template generated using a standard containing all 209 CBs. Using such a template, 64 CBs were identified in the grey seal blubber sample.     

Synthesis of 11C-labelled N,N'-diphenylurea and ethyl phenylcarbamate by a rhodium-promoted carbonylation via [11C]isocyanatobenzene using phenyl azide and [11C]carbon monoxide

The reaction with phenyl azide and [11C]carbon monoxide to give N,N'-diphenyl[11C]urea and ethyl phenyl[11C]carbamate has been studied with the aim of development of a new methodology for carbonylation using [11C]carbon monoxide with high specific radioactivity. The synthesis of 11C-labelled N,N'-diphenylurea from phenyl azide and [11C]carbon monoxide, with 1,2-bis(diphenylphosphino)ethane-bound Rh(I) complex at 120 degrees C at a pressure of 35 MPa in the presence of aniline was accomplished in 82% trapping efficiency and 82% conversion yield. This approach was also useful for the synthesis of ethyl phenyl[11C]carbamate with lithium ethoxide as a nucleophilic reagent giving 90% trapping efficiency and 76% conversion yield. These reactions can be considered to proceed via a [11C]isocyanate or a [11C]isocyanate-coordinated Rh complex to give the corresponding 11C-products. This protocol provides the chemical basis for the synthesis of [11C]urea and [11C]carbamate derived from [11C]isocyanates.     

Flow-injection determination of trace hydrogen peroxide or glucose utilizing an amperometric biosensor based on glucose oxidase bound to a reticulated vitreous carbon electrode

An electron transfer mediator, 8-dimethylamino-2,3-benzophenoxazine (Meldola Blue), dissolved in the carrier solution in a flow-injection system, was found to reduce the oxidation potential for hydrogen peroxide from 600-1200 mV without mediator to-100 mV vs. Ag/AgCl with the mediator present. The very low background current of reticulated vitreous carbon (RVC) at this potential makes it possible to detect very low levels of hydrogen peroxide or glucose. Glucose oxidase was covalently coupled with carbodiimide to RVC, and the RVC was formed into a column inserted in a flow-injection system. The calibration curve was linear from 30 nM to 10 microM glucose with 5 microM mediator. At higher mediator concentrations, the linear range was extended to 1000 microM, but with a much higher background current. The sample throughput was about 60 h(-1). The current response decreased to 50% of the original response after 20 days. The coulometric yield was high because the sample was pumped through the pores of the RVC. It was 16% and 55% at a flow rate of 1 ml min(-1) at mediator concentrations of 5 and 50 microM respectively.     

On the macro- and microphase separation of compatibilizers in immiscible polymer blends

Macro- and microphase separation of compatibilizing graft copolymers in melt-mixed polystyrene/polyamide-6 blends was studied by transmission electron microscopy and thermal analysis. Three different graft copolymers with main chains of polystyrene and side chains of poly(ethylene oxide) were used as additives at various concentrations. The polyamide-6 domain sizes decreased with increasing amounts of compatibilizing graft copolymers in the blends up to a saturation concentration, after which no further reduction was noted. Macrophase separation of the graft copolymers into discrete macrodomains 20–200 nm in size occurred at concentrations equal to or slightly lower than the saturation concentration. The macrodomains of the graft copolymers were microphase separated, and the sizes and shapes of the microdomains were found to largely depend on the graft copolymer structure and composition. As a consequence of microphase separation, poly(ethylene oxide) crystallinity was noted in blends with sufficiently high macrophase contents. Observations of a graft copolymer interphase between the polystyrene matrix and the polyamide-6 domains confirmed that the graft copolymer was present at the blend interfaces in some of the compatibilized blends. © 1996 John Wiley & Sons, Inc.     

The electrostatic interaction between a charged sphere and an oppositely charged planar surface and its application to protein adsorption

To calculate the electrostatic interaction between a charged sphere and a charged surface under the condition of constant charge density on the two surfaces is difficult. The theory presented in this paper provides an approximate solution to this problem when the charge of the two bodies is of opposite sign. The proposed calculation model is based on a solution of the Poisson–Boltzmann (P–B) equation for two oppositely charged planar surfaces to which the approximate integration procedure developed by Deryaguin is applied. The obtained expression is rather simple and is in good agreement with retention data for a protein in ion exchange chromatography. The developed model is physically more sound than the previously developed ‘slab’ model for protein retention. Under the experimental conditions of ion exchange chromatography of proteins, the two models give comparable numerical values for the ionic strength dependence of retention.