Implementation of recycling routes for scanning probe microscopy tips.

In this work, effective, yet simple, recycling mechanisms for used scanning probe microscopy (SPM) tips were implemented. Comprising a tip profile characterization methodology and specific cleaning procedures, which decontaminate SPM tips whether the contamination nature is known or not, such routes were optimized during numerous tests with brand new, previously used, and already discarded categories of SPM tips. The results show that if the used tip suffered contamination only, but no physical damages, during its scanning lifetime, it becomes readily available for reutilization after the cleansing process, characterizing a recycling route. On the other hand, if the tip went through wear and breakages during its utilization, it still can be decontaminated, but may not be directly reutilized due to its inadequate physical profile. Nevertheless, the methodology developed in this work may yet be applied as part of a more complex recycling route.     

On the piezoelectricity of anionic collagen films

In this paper, we report results of a study of the physicochemical, dielectric and piezoelectric properties of anionic and native collagen films, considering the development of new biomaterials which have potential applications in coating of cardiovascular prostheses, support for cellular growth and in systems for controlled drug delivery. The piezoelectric strain tensor element d₁₄, the elastic constant s₅₅, and the dielectric permittivity ?₁₁ were measured for the anionic and native collagen films. It was observed that the collagen samples submitted to the alkaline treatment present lower thermal stability than those made from native collagen. However, the treated samples present a higher piezoelectricity compared with the native collagen. The frequency constant fL and the piezoelectric strain element d₁₄, obtained for the alkaline-treated sample (72 h), present the highest values for the samples under study (444.1 kHz m and 0.079 pC/N, respectively). We believe that the alkaline treatment led to an increase of the organization of the microscopic fiber structure of the sample, which could result in an increase of the piezoelectricity.     

A novel strategy to verification of adulteration in alcoholic beverages based on Schlieren effect measurements and chemometric techniques

A novel strategy to evaluation of adulteration in alcoholic beverages based on the measurement of the Schlieren effect using an automated FIA system with photometric detection is proposed. The assay is based on the Schlieren effect produced when beverage samples are injected in a single-line FIA system that uses water as carrier stream and a light-emitting diode-phototransistor photometer controlled by microcomputer as detector. The flow system presents limited mixing conditions which make possible to create gradients of refractive index (Schlieren effect) in the injected sample zone. These gradients are reproducible, characteristic of each alcoholic beverage and undergo specific modifications when adulterations with water or ethanol are imposed. Schlieren effect data of brandies, cachaças, rums, whiskies and vodkas were treated by SIMCA to elaborate class models applied in the evaluation of alcoholic beverages adulteration. Samples of the original matrix of each sort of beverages were adulterated in laboratory by adding water, methanol and ethanol in levels of 5% and 10% (v/v). These samples were used as test set to validate SIMCA class models. The verification of authenticity using Schlieren effect measurements presented good results making possible to identify 100% of the beverages samples adulterated in laboratory and 93% of the actual adulterated alcoholic beverages with confidence levels of 95%. As principal advantage, the automated system does not use reagents to carry out the analysis.     

Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

Theoretical concerns about the use of cemented and press-fit stems in revision total knee arthroplasty (TKA) include stress shielding with adverse effects on prosthesis fixation. Radiological studies have showed distal femoral bone resorption after revision TKA. The revision with use of stems can place abnormal stresses. These stresses can promote the effect of bone stress shielding and may contribute to bone loss. Experimental quantification of strain shielding in the distal synthetic femur following TKA is the main purpose of the present study. Three different constructs of TKA were assessed. The first construct included a stemless femoral component. The other two included a press-fit and a cemented femoral stem. Cortical bone strains were measured experimentally with tri-axial strain gauges in synthetic femurs before and after in-vitro knee surgery. The difference between principal strains of implanted and intact femur was calculated for each strain gauge position. This study indicates that the use of stems in distal femur changes the distribution and magnitude of bone strains. The press-fit stem provoked relevant bone area (stem length) subjected to strain shielding and also originated the highest reduction of strains in the distal region, which can potentially induce bone resorption. The stemless implanted femur produced minor bone strain changes relatively to the intact femur. The use of distal femur stems increases initial stability in the bone, but the observed reduction of strains in this region, relative to the intact femur, provokes strain shielding that can induce bone resorption and may compromise the long term implant stability.     

Simultaneous Determination of Carbamate and Organophosphorus Pesticides in Honeybees by Liquid Chromatography-Mass Spectrometry

Summary The potential of liquid chromatography-mass spectrometry (LC-MS) has been studied for the simultaneous determination of sixteen carbamate and organophosphorus pesticides in honeybees using a traditional sample preparation protocol based on acetone extraction and dichloromethane partitioning. The performances of both atmospheric pressure chemical ionization (APCI) and electrospray (ES) interfaces were compared. APCI offered better sensitivity and specificity for a higher range of pesticides. Limits of quantification were from 0.01 to 0.17 mg kg^–1, at which recoveries obtained were between 64 and 93%, except for pirimicarb that was at 13%, with relative standard deviations ranging from 7 to 20%. Fenitrothion, fenoxycarb, methiocarb and phoxim were found in bees from Valencian Community beehives at concentrations between 0.03 and 3.75 mg kg^–1.     

Mathematical modeling of crystallization analysis fractionation (Crystaf) of polyethylene

Four polyethylene samples (PE) with different molecular weight distributions (MWD) were analyzed by crystallization analysis fractionation (Crystaf) at several cooling rates to investigate the effect of MWD and cooling rate on their Crystaf profiles. Using these results, we developed a mathematical model for Crystaf that considers crystallization kinetic effects, which are ignored in all previous Crystaf models. The Crystaf model we proposed can fit the experimental Crystaf profiles of the 4 polyethylene resins very well. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2749–2759, 2006     

On the growth type of entire monogenic functions

In this paper we establish an explicit relation between the growth type of general entire solutions to the generalized Cauchy-Riemann system in \mathbbRⁿ⁺¹{\mathbb{R}^{n+1}} and their Taylor coefficients. This formula then enables us to compute the growth type of some higher dimensional generalizations of the trigonometric and special functions that are null-solutions to this system.     

The effect of microwave annealing on the electrical characteristics of lanthanum doped bismuth titanate films obtained by the polymeric precursor method

Lanthanum doped bismuth titanate thin films (Bi_3.25La_0.75Ti₃O₁₂ - BLT) were produced by the polymeric precursor method and crystallized in a domestic microwave oven and in conventional furnace. Using platinum coated silicon substrates configuration, ferroelectric properties of the films were determined with remanent polarization P_r and a coercive field E_c of 3.9 μC/cm² and 70 kV/cm for the film annealed in the microwave oven and 20 μC/cm² and 52 kV/cm for the film annealed in conventional furnace, respectively. The films annealed in conventional furnace exhibited excellent retention-free characteristics at low infant periods indicating that BLT thin films can be a promise material for use in non-volatile memories. On the other hand, the pinning of domains wall causes a strong decay at low infant periods for the films annealed in the microwave furnace which makes undesireable the application for future FeRAMS memories.     

Should Epstein strip arrangement be changed?

The paper describes effect of texture on the anisotropy of magnetic properties and shows that an Epstein strip arrangement including strips cut in a direction 45° to the rolling direction gives property values that are closer to the average values than the traditional RD+TD arrangement.     

On the phase structure of the compact abelian lattice Higgs model

This paper studies the vacuum overlap order parameter proposed by Fredenhagen and Marcu in the case of the compactU(1) gauge model with the Wilson action coupled to a Higgs field with fixed length ||=1. The existence of two distinct phases inD space-time dimensions (D4) is established.