Rapid, low pressure, and simultaneous ion chromatography of common inorganic anions and cations on short permanently coated monolithic columns

Short permanently coated reversed-phase silica based monolithic columns have been investigated for the rapid separation of inorganic anions and cations. One 2.5 x 0.46 cm column was permanently coated with didodecyldimethylammonium (DDAB), for anion analysis; and a second 5.0 x 0.46 cm column was coated with dioctylsulphosuccinnate (DOSS), for cation analysis. The use of a single combined eluent of 2.5 mM phthalate/1.5 mM ethylenediamine, at flow rates of between 4.0 and 8.0 mL/min, resulted in the rapid separation of 8 anions (in under 100 s) and 5 cations (in under 100 s) on the above columns when used individually, with detection limits for common anions ranging from approximately 0.25 to 5 mg/L, and between 2.5 and 50 mg/L for alkaline earth metals, by direct and indirect conductivity detection, respectively. However, with both columns subsequently connected in parallel, with the eluent delivered using a flow splitter from a single isocratic pump, the simultaneous analysis of anions and cations was also possible, based on a single conductivity detector. The potential of this system for the rapid, complete screening of water samples for multiple common anions and cations is shown.     

Intramolecular Diels-Alder and tandem intramolecular Diels-Alder/1,3-dipolar cycloaddition reactions of 1,3,4-oxadiazoles

The scope of intramolecular Diels-Alder and a novel tandem Diels-Alder/1,3-dipolar cycloaddition cascade of 1,3,4-oxadiazoles is disclosed. In the cases examined, the tandem cycloadditions construct three new rings with formation of four new C-C bonds and set all six stereocenters about a central six-membered ring in a single step including three contiguous and four total quaternary centers without a trace of a second diastereomer.     

Star-shaped azo-based dipolar chromophores: design, synthesis, matrix compatibility, and electro-optic activity

Three new azo-benzene-based push-pull chromophores with dendritic architecture were synthesized as active materials for electro-optic applications. These chromophores were synthesized in six or seven synthetic steps with an overall yield of around 80% per step and high purity. UV-vis spectroscopy showed significant influence of the transient dipole moment on the observed r(33) values. The chromophores were stable to photochemical oxidation in ambient light and air. The electrical poling conditions were optimized for each chromophore as the T(g) of the composite material varied significantly. The highest EO coefficient achieved was 22-25 pm/V at 1550 nm wavelength. STEM analysis of the blends enabled the correlation of the activity of these large chromophores with the blend morphology. An amorphous polycarbonate host effectively disperses the chromophores in 2-20 nm aggregates in the active materials. However, macrophase separation into 200-500 nm aggregates was observed in a methacrylate host matrix.     

Fundamental role of the fostriecin unsaturated lactone and implications for selective protein phosphatase inhibition

Key derivatives and analogues of fostriecin were prepared and examined that revealed a fundamental role for the unsaturated lactone and confirmed the essential nature of the phosphate monoester. Thus, an identical 200-fold reduction in protein phosphatase 2A (PP2A) inhibition is observed with either the saturated lactone (7) or with an analogue that lacks the entire lactone (15). This 200-fold increase in PP2A inhibition attributable to the unsaturated lactone potentially may be due to reversible C269 alkylation within the PP beta12-beta13 active site loop accounting for PP2A/4 potency and selectivity.     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.     

Highly efficient antibody-catalyzed deuteration of carbonyl compounds

Antibody 38C2 efficiently catalyzes deuterium-exchange reactions at the alpha position of a variety of ketones and aldehydes, including substrates that have a variety of sensitive functional groups. In addition to the regio- and chemoselectivity of these reactions, the catalytic rates (kcat) and rate-enhancement values (kcat/kun) are among the highest values ever observed with catalytic antibodies. Comparison of the substrate range of the catalytic antibody with highly evolved aldolase enzymes, such as rabbit-muscle aldolase, highlights the much broader practical scope of the antibody, which accepts a wide range of substrates. The hydrogen-exchange reaction was used for calibration and mapping of the antibody active site. Isotope-exchange experiments with cycloheptanone reveal that the formation of the Schiff base species (as concluded from the 16O/18O exchange rate at the carbonyl oxygen) is much faster than the formation of the enamine intermediate (as concluded from the H/D exchange rate), and both steps are faster than the antibody-catalyzed aldol addition reaction.     

Reactions of lignin in chlorine dioxide bleaching of kraft pulps

The reactions between chlorine dioxide and the residual lignin in oxygen-bleached softwood kraft pulps have been studied. In a first series, isolated lignin samples have been subjected to chlorine dioxide oxidation at different pH values and subsequently analysed by oxidative degradation and elemental analysis. Different analytical techniques have also been employed to follow the gradual chemical changes in lignins isolated from kraft pulps after each of the bleaching stages in the OD(EOP)DD sequence. The results demonstrate that, in order to minimize chlorination of the lignin, the first chlorine dioxide stage should be carried out at a pH around or above three. At this pH level, a high degree of lignin oxidation is also achieved. A certain (mono)-chlorination of the lignin in the first D stage cannot be avoided, but this chlorine is to a large extent removed in the later bleaching stages. The efficient and non-selective oxidation of the various phenolic lignin end groups by chlorine dioxide is clearly illustrated by the analytical data. Moreover,¹³C NMR reveals that reduced lignin structures formed during the kraft cook survive the oxidative bleaching stages to a large extent.     

Analysis of methoxypyrazines in wine using headspace solid phase microextraction with isotope dilution and comprehensive two-dimensional gas chromatography

This study reports an optimized headspace-solid phase microextraction (HS-SPME) method for the determination of methoxypyrazines in wine. Analysis was performed by using comprehensive two-dimensional gas chromatography with novel detection capabilities, including nitrogen phosphorus detection (GC x GC-NPD) and time-of-flight mass spectrometry (GC x GC-TOFMS). In the latter, stable isotope dilution was performed for the quantitation of 2-methoxy-3-(2-methylpropyl) pyrazine (IBMP), using labelled 2-(2H3)methoxy-3-(2-methylpropyl)pyrazine (d3-IBMP) as the internal standard, and resolution of the two analogues was facilitated using the deconvolution capabilities of the TOFMS. This research represents the first report of HS-SPME with isotope dilution and GC x GC-TOFMS (GC x GC-IDTOFMS). Analysis by GC x GC-NPD enabled detection limits of 0.5 ng/L for the quantitation of IBMP, which was superior to that obtained using GC x GC-IDTOFMS (1.95 ng/L). Nevertheless, both methods were adequately sensitive for real wine analysis, yielding highly comparable IBMP concentrations of 26.1 and 27.8 ng/L, respectively, from a Sauvignon blanc wine. The complexity of the real wine headspace was simplified as a result of selective detection using GC x GC-NPD and, in the case of GC x GC-IDTOFMS, the use of extracted ion chromatograms (EICs).     

A Class of Non-associated Materials: n-Monotone Materials—Hooke’s Law of Elasticity Revisited

Generalized Standard Materials are governed by maximal cyclically monotone operators and modeled by convex potentials. Géry de Saxcé’s Implicit Standard Materials are modeled by biconvex bipotentials. We analyze the intermediate class of n-monotone materials governed by maximal n-monotone operators and modeled by Fitzpatrick’s functions. Revisiting the model of elastic materials initiated by Robert Hooke, and insisting on the linearity, coaxiality and monotonicity properties of the constitutive law, we illustrate that Fitzpatrick’s representation of n-monotone operators coming from convex analysis provides a constructive method to discover the best bipotential modeling a n-monotone material. Giving up the symmetry of the linear constitutive laws, we find out that n-monotonicity is a relevant criterion for the materials characterization and classification.     

Martingales and buffer overflow for the symmetric shortest queue model

Queueing Systems - A variant of the standard symmetric system of two parallel queues under the join-the-shortest-queue policy is introduced. Here, the shortest queue has service rate $$\mu _1$$ ,...