Star-shaped azo-based dipolar chromophores: design, synthesis, matrix compatibility, and electro-optic activity

Three new azo-benzene-based push-pull chromophores with dendritic architecture were synthesized as active materials for electro-optic applications. These chromophores were synthesized in six or seven synthetic steps with an overall yield of around 80% per step and high purity. UV-vis spectroscopy showed significant influence of the transient dipole moment on the observed r(33) values. The chromophores were stable to photochemical oxidation in ambient light and air. The electrical poling conditions were optimized for each chromophore as the T(g) of the composite material varied significantly. The highest EO coefficient achieved was 22-25 pm/V at 1550 nm wavelength. STEM analysis of the blends enabled the correlation of the activity of these large chromophores with the blend morphology. An amorphous polycarbonate host effectively disperses the chromophores in 2-20 nm aggregates in the active materials. However, macrophase separation into 200-500 nm aggregates was observed in a methacrylate host matrix.     

Poly-β-hydroxybutyrate Production by Fast-Growing Rhizobia Cultivated in Sludge and in Industrial Wastewater

In our study, the potential of producing polyhydroxybutyrate (PHB) by cultivating fast-growing rhizobia (Sinorhizobium meliloti, Rhizobium leguminosarum bv. viciae, R. leguminosarum bv. phaseoli and R. leguminosarum bv. trifolii) in sludge and in industrial wastewater was evaluated. Results confirmed the possibility of using sludge as media for rhizobial growth. During growth, substantial quantity of PHB was accumulated and yields varied depending on the media and rhizobial species. Growing in sludge, PHB production did not exceed 3.7% w/w for all strains at the end of experiment (after 72 h). During the growth of S. meliloti, PHB yield varied and the maximum value reached 7.27% w/w after 60 h, with 1% Total Suspend Solid (TSS) sludge. Alkaline sludge pre-treatment affects rhizobial growth but did not improve the PHB accumulation. While growing S. meliloti in industrial wastewater, the PHB yields varied and the highest value was obtained with slaughterhouse wastewater (10.7% w/w) after 35 h of growth. Therefore, this work shows the potential of exploiting PHB production by rhizobia growing in wastewater or sludge which could be applied to bioplastic industry, and confirms the potential of these recyclable wastes for high production of rhizobial cells useable for legumes inoculants production. This study provides an environmentally sound way of sludge and wastewater management and use in diverse biotechnological applications.     

Extraction of Co-Products from Biomass: Example of Thermal Degradation of Silymarin Compounds in Subcritical Water

In an effort to increase revenues from a given feedstock, valuable co-products could be extracted prior to biochemical or thermochemical conversion with subcritical water. Although subcritical water shows significant promise in replacing organic solvents as an extraction solvent, compound degradation has been observed at elevated extraction temperatures. First order thermal degradation kinetics from a model system, silymarin extracted from Silybum marianum, in water at pH 5.1 and 100, 120, 140, and 160 °C were investigated. Water pressure was maintained slightly above its vapor pressure. Silymarin is a mixture of taxifolin, silichristin, silidianin, silibinin, and isosilibinin. The degradation rate constants ranged from 0.0104 min⁻¹ at 100 °C for silichristin to a maximum of 0.0840 min⁻¹ at 160 °C for silybin B. Half-lives, calculated from the rate constants, ranged from a low of 6.2 min at 160 °C to a high of 58.3 min at 100 °C, both for silichristin. The respective activation energies for the compounds ranged from 37.2 kJ/gmole for silidianin to 45.2 kJ/gmole for silichristin. In extracting the silymarin with pure ethanol at 140 °C, no degradation was observed. However, when extracting with ethanol/water mixtures at and 140 °C, degradation increased exponentially as the concentration of water increased. An erratum to this article can be found at     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

Complete assignment of the 1H and 13C NMR spectra of antimicrobial 4‐arylamino‐ 3‐nitrocoumarin derivatives

Herein, we describe the synthesis and complete assignment of the ¹H and ¹³C NMR chemical shifts of a series of antimicrobial 4‐arylamino‐3‐nitrocoumarin derivatives based on a combination of ¹H and ¹³C NMR, ¹H‐¹H‐COSY, NOESY, HSQC and HMBC experiments. Conformational effects upon the chemical shifts of the coumarin moiety arising from the anisotropy of the aryl side group are briefly discussed. This study provides the first complete and fully assigned NMR data for this important group of antimicrobial compounds and bridges the gap existing in the literature with regard to NMR structural data for 4‐arylamino‐3‐nitrocoumarins. Copyright © 2010 John Wiley & Sons, Ltd.     

Dimerization and anion binding of a fluorescent phospholipid analogue

A diarylacetylene fluorophore featuring spatially separated urea and phosphocholine (PC) groups forms a macrocyclic "head-to-tail" dimer stabilized by NH(urea)···OP(PC) hydrogen bonds. At concentrations above ～2 × 10(-5) M in CH(2)Cl(2), the emission intensity of the dimer is quenched by HCO(3)(-) and H(2)PO(4)(-) but not by Cl(-) and NO(3)(-). Under more dilute conditions, all four anions are bound unselectively with association constants on the order of 10(5) M(-1).     

Intramolecular Diels-Alder and tandem intramolecular Diels-Alder/1,3-dipolar cycloaddition reactions of 1,3,4-oxadiazoles

The scope of intramolecular Diels-Alder and a novel tandem Diels-Alder/1,3-dipolar cycloaddition cascade of 1,3,4-oxadiazoles is disclosed. In the cases examined, the tandem cycloadditions construct three new rings with formation of four new C-C bonds and set all six stereocenters about a central six-membered ring in a single step including three contiguous and four total quaternary centers without a trace of a second diastereomer.     

Rapid, low pressure, and simultaneous ion chromatography of common inorganic anions and cations on short permanently coated monolithic columns

Short permanently coated reversed-phase silica based monolithic columns have been investigated for the rapid separation of inorganic anions and cations. One 2.5 x 0.46 cm column was permanently coated with didodecyldimethylammonium (DDAB), for anion analysis; and a second 5.0 x 0.46 cm column was coated with dioctylsulphosuccinnate (DOSS), for cation analysis. The use of a single combined eluent of 2.5 mM phthalate/1.5 mM ethylenediamine, at flow rates of between 4.0 and 8.0 mL/min, resulted in the rapid separation of 8 anions (in under 100 s) and 5 cations (in under 100 s) on the above columns when used individually, with detection limits for common anions ranging from approximately 0.25 to 5 mg/L, and between 2.5 and 50 mg/L for alkaline earth metals, by direct and indirect conductivity detection, respectively. However, with both columns subsequently connected in parallel, with the eluent delivered using a flow splitter from a single isocratic pump, the simultaneous analysis of anions and cations was also possible, based on a single conductivity detector. The potential of this system for the rapid, complete screening of water samples for multiple common anions and cations is shown.     

Fundamental role of the fostriecin unsaturated lactone and implications for selective protein phosphatase inhibition

Key derivatives and analogues of fostriecin were prepared and examined that revealed a fundamental role for the unsaturated lactone and confirmed the essential nature of the phosphate monoester. Thus, an identical 200-fold reduction in protein phosphatase 2A (PP2A) inhibition is observed with either the saturated lactone (7) or with an analogue that lacks the entire lactone (15). This 200-fold increase in PP2A inhibition attributable to the unsaturated lactone potentially may be due to reversible C269 alkylation within the PP beta12-beta13 active site loop accounting for PP2A/4 potency and selectivity.     

Tuning Thiophene with Phosphorus: Synthesis and Electronic Properties of Benzobisthiaphospholes

1,4‐Dimercapto‐2,5‐diphosphinobenzene and 3,6‐bis(hexyloxy)‐1,4‐dimercapto‐2,5‐diphosphinobenzene were synthesized and combined with various acid chlorides to obtain a series of benzobisthiaphospholes. Electrochemical and photophysical properties of the substituted benzobisthiaphospholes have been evaluated, and the observed reductions are more facile than the related benzothiaphospholes and 2,6‐diphenylbenzobisthiazole. A benzobisthiaphosphole with C₆H₄‐p‐CN substituents was reduced at E_1/2=?1.08 V (vs. saturated calomel electrode (SCE)). X‐ray diffraction data for several of these phosphorus heterocycles has been obtained, and DFT calculations at the B3LYP level have been performed.