Correlation Between Segmental Dynamics,Glass Transition,and Lithium Ion Conduction in Poly(Methyl Methacrylate)/Ionic Liquid Mixture

A solid-state membrane of a polymer/ionic liquid miscible mixture, poly(methyl methacrylate) (PMMA) and 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆) doped with lithium perchlorate (LiClO₄), was prepared and characterized. Miscibility, segmental dynamics, glass transition and ionic conductivity were investigated. Based on the results from differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA), the system is fully miscible and of single phase. Broadening of the glass transition was observed when increasing the amount of ionic liquid, which can be attributed to mobility and flexibility differences between the polymer and ionic liquid. A large dynamical asymmetry and intrinsic mobility difference allow segmental and structural motion/relaxation over a wider temperature range by increasing the amount of ionic liquid. Saturation recovery spin–lattice relaxation time (T₁) versus temperature obtained from ⁷Li nuclear magnetic resonance (NMR) showed high mobility of lithium ions, which was almost temperature independent. Lithium ion conductivity significantly increases with increasing ionic liquid amount. It is concluded that lithium ion mobility and its conduction is positively correlated to segmental dynamics of ion carriers in this model system, which is more noticeable in mixtures with higher amounts of the ionic liquid.     

Sample Preparation for the Determination of Metals in Food Samples Using Spectroanalytical Methods—A Review

Abstract

The present article gives an overview of recent publications and modern techniques of sample preparation for food analysis employing atomic and inorganic mass spectrometric techniques, such as flame atomic absorption spectrometry, chemical vapor generation atomic absorption and atomic fluorescence spectrometry, graphite furnace atomic absorption spectrometry, inductively coupled plasma optical emission spectrometry, and inductively coupled plasma mass spectrometry. Among the most frequently applied sample preparation techniques for food analysis are dry ashing, usually with the addition of an ashing aid, and acid digestion, preferably with the assistance of microwave energy. Slurry preparation, particularly with the assistance of ultrasound, is increasingly used to reduce acid consumption and sample preparation time. Direct analysis of solid samples is gaining importance in the field of food analysis as it offers the highest sensitivity, avoids the use of acids and other aggressive reagents, makes possible the analysis of micro‐samples, and can be applied for fast screening analysis, e.g., of fresh meat.     

A Robertson-type uncertainty principle and quantum Fisher information

Let A₁,…,A_N be complex self-adjoint matrices and let ρ be a density matrix. The Robertson uncertainty principle

     

Finite Element Analysis of General Magnetomechanical Coupling Phenomena

In this paper we consider the derivation of a finite element model for fully–coupled magneto–mechanical boundary value problems based on a vector–valued magnetic potential. The formulation allows for the incorporation of nonlinear, anisotropic and hysteretic constitutive response. A piezomagnetic inclusion problem is computed to test the implementation. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

The a.c. susceptibility third harmonic component of NdO1−0.14F0.14FeAs: A flux dynamic magnetic analysis

In this contribution we present the analysis of the third harmonic susceptibility data of the new superconductor NdFeAs_1−0.14F_0.14. ‘Cole-Cole’ polar plots respect to the magnetic frequency of the exciting field are presented and discussed. Data show that NdFeAs_1−0.14F_0.14 exhibit a ‘bulk pinning’ with a 3D flux dynamic character. A comparison of the responses of high T_c materials and an evaluation of theoretical critical states is also presented.     

Chemically stable anode-supported solid oxide fuel cells based on Y-doped barium zirconate thin films having improved performance

Anode-supported solid oxide fuel cells (SOFCs) based on thin BaZr_0.8Y_0.2O_3 ? δ (BZY) electrolyte films were fabricated by pulsed laser deposition (PLD) on sintered NiO–BZY composite anodes. After in situ reduction of NiO to Ni, the anode substrates became porous, while retaining good adhesion with the electrolyte. A slurry-coated composite cathode made of La_0.6Sr_0.4Co_0.2Fe_0.8O_3 ? δ (LSCF) and BaCe_0.9Yb_0.1O_3 ? δ (BCYb), specifically developed for proton conducting electrolytes, was used to assemble fuel cell prototypes. Depositing by PLD 100 nm thick LSCF porous films onto the BZY thin films was essential to improve the cathode/electrolyte adhesion. A power density output of 110 mW/cm² at 600 °C, the largest reported value for an anode-supported fuel cell based on BZY at this temperature, was achieved. Electrochemical impedance spectroscopy (EIS) measurements were used to investigate the different contributions to the total polarization losses.     

Some cyclization reactions of 1,3-diphenylbenzo[e][1,2,4]triazin-7(1H)-one: preparation and computational analysis of non symmetrical zwitterionic biscyanines

Regioselective nucleophilic addition of bisnucleophiles 1,2-benzenediamine, 2-amino-benzenethiol, and N-phenyl-1,2-benzenediamine to 1,3-diphenylbenzo[e][1,2,4]triazin-7(1H)-one (1) at C6 followed by intramolecular cyclocondensation at the C7 carbonyl afforded highly coloured tetracenes 1,3-diphenyl-1,6-dihydro-[1,2,4]triazino[5,6-b]phenazin-4-ium 4-methylbenzenesulfonate (12), 1,3-diphenyl-1H-[1,2,4]triazino[6,5-b]phenothiazine (14) and 1,3,11-triphenyl-1,6-dihydro-[1,2,4]triazino[5,6-b]phenazin-11-ium 4-methylbenzenesulfonate (15), respectively. Neutralization of the latter with alkali gave the free base 1,3,11-triphenyl-1H-[1,2,4]triazino[5,6-b]phenazin-11-ium-6-ide (16). Furthermore, the benzotriazinone 1 reacts with dimethyl malonate to give 6-(methoxycarbonyl)-7-oxo-1,3-diphenyl-7H-benzofuro[5,6-e][1,2,4]triazin-1-ium-4-ide (17) in 74% yield, while with S(4)N(4) [5,6-c]-thiadiazolo-7-oxo-1,3-diphenyl-1,2,4-benzotriazine (22) was formed in 15% yield. The free bases 16 and 17 display negative solvatochromism, which supports charge separated ground states similar to those of zwitterionic biscyanines, and DFT calculations at the UB3LYP/6-31G(d) level afford ΔE(ST) values of -13.6 and -18.7 kcal mol(-1), respectively that strongly favour the singlet ground state. All ring systems described are new and fully characterized.     

Synthesis of chiral β-3-amino-2-hydroxyalkanoates and 3-alkyl-3-hydroxy-β-lactams by double asymmetric induction

Reactions of chiral (2S)-enolates of dioxolan-4-ones, derived from lactic, mandelic, and phenyllactic acids, with aliphatic (S_S)- and (S_R)-tert-butylsulfinyl aldimines afforded conformationally restrained C2-disubstituted N,O-orthogonally protected 3-amino-2-hydroxyalkanoates in the form of N-sulfinyl protected 1′-aminodioxolan-4-ones. The product distribution showed that there is significant kinetic selectivity, due to the presence of ‘matched’ and ‘mismatched’ components, between the (S)- or (R)-tert-butylsulfinyl aldimines and the (2S)-enolates of the 1,3-dioxolan-4-ones. Selective methoxide-induced removal of the acetal group of the N-sulfinyl-1′-aminodioxolanones yielded the corresponding N-sulfinyl protected methyl alkanoates. In addition, the selective acid-induced removal of the sulfinyl group of the N-sulfinyl-1′-aminodioxolanones provided the corresponding N-unprotected 1′-aminodioxolanones, whose base-induced cyclization afforded the corresponding β-lactams.     

The formation of proton and alkali metal complexes with ligands of biological interest in aqueous solution. Thermodynamics of Li+, Na+ and K+-dicarboxylate complex formation

The formation and stability of Li⁺, Na⁺ and K⁺ complexes with oxalate, malonate, succinate, maleate, DL-malate and phthalate were studied potentiometrically at various ionic strengths. From the data thus obtained, as well as from several literature data on the protonation of the above-mentioned ligands in various ionic media and at various temperatures, the dependence of Na⁺ and K⁺ complex formation on temperature was determined. The dependence on ionic strength, both for the protonation and the complex formation, is also discussed.     

Design and synthesis of polytripeptide (leuglnpro)n based upon the matrix protein amelogenin

A linear neutral repetitive peptide, (Leu-Gln-Pro)_n (n = 1-100), an analog of the Ca²⁺ ion-binding domain of the matrix protein, amelogenin, has been synthesized. The polypeptide is mostly unordered in trifluoroethanol (TFE) at 25°C and its circular dichroism (CD) spectrum resembles that of the protein itself. In TFE the CD spectrum of (Leu-Gln-Pro)_n reveals that the polypeptide interacts strongly with divalent cations Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺ accompanied by conformational rearrangement from a random to a more-ordered one. In the presence of Li⁺, Na⁺ and K⁺ ions no such conformational change has been observed. The CD curves of the complexes suggest the presence of type I β-turns and reinforce the hypothesis that the region Gln₁₁₂-Leu₁₃₈ in amelogenin is the Ca²⁺-binding domain. In the solid state, powder X-ray diffraction suggests that the polymeric (LQP)_n may exist as isolated “rigid rods”.