Prediction of intracellular storage polymers using quantitative image analysis in enhanced biological phosphorus removal systems

The present study focuses on predicting the concentration of intracellular storage polymers in enhanced biological phosphorus removal (EBPR) systems. For that purpose, quantitative image analysis techniques were developed for determining the intracellular concentrations of PHA (PHB and PHV) with Nile blue and glycogen with aniline blue staining. Partial least squares (PLS) were used to predict the standard analytical values of these polymers by the proposed methodology. Identification of the aerobic and anaerobic stages proved to be crucial for improving the assessment of PHA, PHB and PHV intracellular concentrations. Current Nile blue based methodology can be seen as a feasible starting point for further enhancement. Glycogen detection based on the developed aniline blue staining methodology combined with the image analysis data proved to be a promising technique, toward the elimination of the need for analytical off-line measurements.     

Synthesis and preliminary biological evaluation of a new pyridocarbazole derivative covalently linked to a thymidine nucleoside as a potential targeted antitumoral agent. I

The therapy of human cancer is one of the more pursued goals by medicinal chemistry research. Most of the compounds clinically used as a treatment owe their efficacy to their cytotoxic interaction (direct or indirect) with nuclear DNA. This interaction results in the inhibition of DNA synthesis and the degradation of nucleic strands. Ellipticine is a naturally occurring 6H-pyrido[4,3-b]carbazole alkaloid endowed with antitumor activity, and several ellipticine derivatives have been used in clinical trials. We previously reported some 1,4-dimethyl-9H-carbazole derivatives structurally related to ellipticine. The purpose of our research was to transform the pyridocarbazole in a prodrug so that it would have more penetration in the tumor cells and block their replication. Our prodrug is slowly hydrolyzed in human plasma in the corresponding acid. From these preliminary results, we deduce that our compound can block cellular replication. Our hypothesis is that the antitumoral activity is probably related to the induction of damage to DNA, without cellular lysis in the short term.     

Catalytic, asymmetric synthesis of α,α-disubstituted amino acids

Copper(salen) complex 1 has been found to catalyse the asymmetric alkylation of enolates derived from a variety of amino acids. There is a clear relationship between the size of the side chain in the substrate and the enantioselectivity of the process, so that the enantioselectivity decreases in the order alanine>aminobutyric acid>allylglycine>leucine>phenylalanine>valine. A transition state model which accounts for the influence of the size of the side chain on the enantioselectivity of the reactions is presented.     

Fast HPLC Method for Determination of Fenoxycarb and Permethrin in Antiparasitic Veterinary Shampoo Using Fused-Core Column

A new and fast high-performance liquid chromatography (HPLC) method using technology of fused-core columns for separation of fenoxycarb and cis-, trans-permethrin has been developed and used for their determination in antiparasitic veterinary shampoo. Separation of insecticides and internal standard sudan II was achieved on the fused-core column Ascentis Express RP-Amide (100 × 3.0 mm), particle size 2.7 μm, with mobile phase acetonitrile/water (55:45, v/v) at a flow rate of 1.0 mL min⁻¹ and at temperature 60 °C. The detection wavelength of detector was set at 225 nm for both compounds and internal standard sudan II. Under the optimum chromatographic conditions standard calibration curves were measured with good linearity [r ² = 0.99991 for fenoxycarb, r ² = 0.99987 for trans-permethrin, and r ² = 0.99984 for cis-permethrin (n = 8)]. Commercial samples of antiparasitic veterinary shampoo were extracted with ethanol in ultrasound bath for 5 min. A 2-μL sample volume of the filtered solution was directly injected into the HPLC system. Accuracy of the method defined as a mean recovery of insecticides from shampoo matrix was in the range 100.43–103.85 % for both insecticides.

     

Aggregation induced colour change for phosphorescent iridium(III) complex-based anionic surfactants

We describe a new class of water soluble metallosurfactant molecules based on luminescent neutral iridium(III) complexes. The compounds possess an alkyl chain terminated with a negatively charged group, a sulphate. Due to their amphiphilic nature they assemble in aggregates in water and their photophysical properties, as well as the morphological characterization of the assemblies are presented. In particular, UV-Vis absorption, steady-state and time-resolved emission spectroscopy, dynamic light scattering and scanning electron microscopy techniques have been employed towards the analysis of the assemblies in different media. Comparison with the single components shows that the aggregates have very different photophysical properties. Importantly, the change in colour upon self-assembly is a remarkable feature which could be used for the design of probes which can change properties in different environments.     

Optical, morphological and structural characterization of Langmuir-Schaefer films of a functionalized copper phthalocyanine

Langmuir-Schaefer (LS) films of copper(II) tetrakis-(isoprpoxy-carbonyl)-phthalocyanine (TiPCuPc) have been deposited onto various solid supports. Its floating film have been characterized at the air-water interface by means of Brewster Angle Microscopy and Langmuir curves. Vibrational modes of multilayer transferred LS film have been studied by Raman spectroscopy and the optical parameters (refractive index n and extinction coefficient k) have been determined in the visible range of the electromagnetic spectrum. Linearly polarized light absorbance measurements have been performed at room temperature in the 400-800 nm spectral range and the average orientation of the phthalocyanine rings have been estimated. Transmission electron microscopy has been also used to characterize the morphological properties of the LS film and a close packed arrangement of the deposited molecules has been observed.     

Shotgun proteomic analytical approach for studying proteins adsorbed onto liposome surface

The knowledge about the interaction between plasma proteins and nanocarriers employed for in vivo delivery is fundamental to understand their biodistribution. Protein adsorption onto nanoparticle surface (protein corona) is strongly affected by vector surface characteristics. In general, the primary interaction is thought to be electrostatic, thus surface charge of carrier is supposed to play a central role in protein adsorption. Because protein corona composition can be critical in modifying the interactive surface that is recognized by cells, characterizing its formation onto lipid particles may serve as a fundamental predictive model for the in vivo efficiency of a lipidic vector. In the present work, protein coronas adsorbed onto three differently charged cationic liposome formulations were compared by a shotgun proteomic approach based on nano-liquid chromatography–high-resolution mass spectrometry. About 130 proteins were identified in each corona, with only small differences between the different cationic liposome formulations. However, this study could be useful for the future controlled design of colloidal drug carriers and possibly in the controlled creation of biocompatible surfaces of other devices that come into contact with proteins into body fluids.     

Under pressure: predicting pressurized metered dose inhaler interactions using the atomic force microscope

Drug particulate interactions in pressurized metered dose inhalers (pMDI) may lead to a decrease in aerosolization efficiency and subsequent efficacy in patient treatment. The interactions between salbutamol sulfate (commonly used in Ventolin pMDIs) and a series of pMDI canister materials were investigated using the atomic force microscope (AFM) colloid probe technique. Approximately 4000 individual force-distance curves were determined for a drug probe and three surfaces (10 x 10 mum areas) in situ, in a model propellant. The area under each force-distance curve was integrated to obtain separation energy values. Median separation energy values followed the rank order borosilicate glass > aluminum > PTFE, suggesting PTFE to be the most suitable canister coating.     

Development of a method for quantitative determination of the cytotoxic agent piplartine (piperlongumine) in multiple skin layers

This study reports the development of a simple and reproducible method, with high rates of recovery, to extract the cytotoxic agent piplartine from skin layers, and a sensitive and rapid UV‐HPLC method for its quantification. Considering the potential of piplartine for topical treatment of skin cancer, this method may find application for formulation development and pharmacokinetics studies to assess cutaneous bioavailability. Porcine skin was employed as a model for human tissue. Piplartine was extracted from the stratum corneum (SC) and remaining viable skin layers (VS) using methanol, vortex homogenization and bath sonication, and subsequently assayed by HPLC using a C₁₈ column, and 1:1 (v/v) acetonitrile–water (adjusted to pH 4.0 with acetic acid 0.1%) as mobile phase. The quantification limit of piplartine was 0.2 μg/mL (0.6 μm ), and the assay was linear up to 5 μg/mL (15.8 μm ), with within‐day and between‐days assay coefficients of variation and relative errors <15%. Piplartine recovery from SC and VS varied from 86 to 96%. The method was suitable to assay samples from skin penetration studies, enabling detection of differences in cutaneous delivery in different skin compartments resulting from treatment with various formulations and time periods.