The Effect of Biomass Immobilization Support Material and Bed Porosity on Hydrogen Production in an Upflow Anaerobic Packed-Bed Bioreactor

The aim of this study was to investigate the effect of the support material used for biomass attachment and bed porosity on the potential generation of hydrogen gas in an anaerobic bioreactor treating low-strength wastewater. For this purpose, an upflow anaerobic packed-bed (UAPB) reactor fed with sucrose-based synthetic wastewater was used. Three reactors with various support materials (expanded clay, vegetal coal, and low-density polyethylene) were operated for hydraulic retention time (HRT) of 0.5 and 2 h. Based on the results obtained, three further reactors were operated with low-density polyethylene as a material support using various bed porosities (91, 75, and 50 %) for an HRT of 0.5 h. The UAPB reactor was found to be a feasible technology for hydrogen production, reaching a maximum substrate-based hydrogen yield of 7 mol H₂ mol^?1 sucrose for an HRT of 0.5 h. The type of support material used did not affect hydrogen production or the microbial population inside the reactor. Increasing the bed porosity to 91 % provided a continuous and cyclic production of hydrogen, whereas the lower bed porosities resulted in a reduced time of hydrogen production due to biomass accumulation, which resulted in a decreasing working volume.     

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.     

Building symmetric polynomials to fit a potential energy surface: application to an A_2B_2 molecule

We present a method to build potential energy surfaces with the correct permutational symmetry of identical atoms. It is explained and applied to an A $_2$ B $_2$ molecular system. This method allows us to use different reference geometries, which are often needed in large molecules.     

Pyrolysis-gas chromatography/fourier-transform infrared spectrometry of poly(ester urethane) elastomers

Three types of industrial poly (ester urethane) elastomers were studied by Curie–point pyrolysis–gas chromatography/Fourier–Transform infrared spectrometry (Py–GC/FTIR) with a maximum pyrolysis temperature of 973 K. The samples chosen were the Urepans 600 and 641 from Bayer and Elastollan C 78 A from BASF/Elastogran. The poly(ester urethane) elastomers are composed of three units: a polyesterdiol, a short chain diol and a diisocyanate. Py–GC/FTIR allows a rapid and unambiguous identification of the polymer chains by key fragments.     

Spectroscopic and quantum-chemical study of molecular interactions of iso-quinolinium ylids in polar solutions

Abstract

Three iso-quinolinium ylids are studied by visible electron absorption spectroscopy from the point of view of their interactions with solvent molecules. The quantum mechanical calculations with Spartan 14 Program and solvatochromism of the intramolecular charge transfer visible absorption band of the studied molecules emphasized the prevalence of universal orientation-induction interactions in aprotic solvents and additionally the presence of hydrogen bond between the ylid molecules and the hydroxyl groups of the solvent molecules. The contribution of each type of interactions in the studied solutions is finally established by a multilinear regression applied to solvatochromic data.     

Revisiting Proteasome Inhibitors: Molecular Underpinnings of Their Development,Mechanisms of Resistance and Strategies to Overcome Anti-Cancer Drug Resistance

Proteasome inhibitors have shown relevant clinical activity in several hematological malignancies, namely in multiple myeloma and mantle cell lymphoma, improving patient outcomes such as survival and quality of life, when compared with other therapies. However, initial response to the therapy is a challenge as most patients show an innate resistance to proteasome inhibitors, and those that respond to the therapy usually develop late relapses suggesting the development of acquired resistance. The mechanisms of resistance to proteasome inhibition are still controversial and scarce in the literature. In this review, we discuss the development of proteasome inhibitors and the mechanisms of innate and acquired resistance to their activity—a major challenge in preclinical and clinical therapeutics. An improved understanding of these mechanisms is crucial to guiding the design of new and more effective drugs to tackle these devastating diseases. In addition, we provide a comprehensive overview of proteasome inhibitors used in combination with other chemotherapeutic agents, as this is a key strategy to combat resistance.     

Glucose/Ribitol Dehydrogenase and 16.9 kDa Class I Heat Shock Protein 1 as Novel Wheat Allergens in Baker’s Respiratory Allergy

Wheat allergens are responsible for symptoms in 60–70% of bakers with work-related allergy, and knowledge, at the molecular level, of this disorder is progressively accumulating. The aim of the present study is to investigate the panel of wheat IgE positivity in allergic Italian bakers, evaluating a possible contribution of novel wheat allergens included in the water/salt soluble fraction. The water/salt-soluble wheat flour proteins from the Italian wheat cultivar Bolero were separated by using 1-DE and 2-DE gel electrophoresis. IgE-binding proteins were detected using the pooled sera of 26 wheat allergic bakers by immunoblotting and directly recognized in Coomassie stained gel. After a preparative electrophoretic step, two enriched fractions were furtherly separated in 2-DE allowing for detection, by Coomassie, of three different proteins in the range of 21–27 kDa that were recognized by the pooled baker’s IgE. Recovered spots were analyzed by nanoHPLC Chip tandem mass spectrometry (MS/MS). The immunodetected spots in 2D were subjected to mass spectrometry (MS) analysis identifying two new allergenic proteins: a glucose/ribitol dehydrogenase and a 16.9 kDa class I heat shock protein 1. Mass spectrometer testing of flour proteins of the wheat cultivars utilized by allergic bakers improves the identification of until now unknown occupational wheat allergens.     

Development of special optical fibers for evanescent-wave chemical sensing

The paper summarizes results achieved in the Institute of Radio Engineering and Electronics in the field of investigation and fabrication of novel fiber-optic structures for evanescent-wave chemical sensing. Several approaches for increasing the evanescent-wave sensitivity of multimode silica optical fibers to gaseous and liquid chemicals are shown. These approaches make use of the decrease of the core diameter in sectorial and capillary sectorial fibers, modification of trajectories of optical rays in the cores of inverted-graded-index fibers, tailoring of the refractive index of porous layers applied on silica cores, an output mode filter preventing the detection of rays propagating at low axial angles or fibers bent in single or multiple turns. Presented at the 1st Czech-Chinese Workshop “Advanced Materials for Optoelectronics”, Prague, Czech Republic, June 13–17, 1998. This work was supported by the Grant Agency of the Czech Republic (projects No. 102/96/0939 and No. 102/98/1358) and by joint project No. 4104 of AS CR and CNRS, France.     

Novel pulsed switched power supply for a fast field cycling NMR spectrometer

In this paper, we outline the operating principles of a pulsed switched power supply for a fast field-cycling nuclear magnetic resonance spectrometer. The power supply uses a variant of a four-quadrant chopper with a duty cycle that defines the average output current. With this topology only two semiconductors are necessary to drive hundreds of amperes with an output power of several kilowatts. The output current ripple has a well-defined shape that can be reduced to acceptable values by a careful design of the semiconductors' controlling circuits and drivers. A power supply prototype was tested with a home build air-core magnet operating with fields between 0 and 0.21 T. The system is computer controlled using pulse generator and data acquisition PC cards, and specific user-friendly home-developed software. A comparative proton relaxometry study in two well-known liquid crystal compounds 5CB and MBBA was performed to check the reproducibility of the T1 measurements.