Evaluation of isothermal kinetic of sweetener

Summary Sulfonylureas are widely used for the treatment of non-insulin dependent diabetes mellitus. Glibenclamide belongs to the group of substituted arylsulfonylureas. Many representative of this group shows polymorphism. The purpose of this work was to investigate the thermal behaviour and compatibility between glibenclamide and some excipients using thermoanalytical techniques (TG-DTG/DSC). The thermal and isothermal kinetics data showed incompatibility between glibenclamide and magnesium stearate.     

Electrospray mass and tandem mass spectrometry of homologous and isomeric singly, doubly, triply and quadruply charged cationic ruthenated meso-(phenyl)m-(meta- and para-pyridyl)n (m + n = 4) macrocyclic porphyrin complexes

Ten homologous or isomeric singly, doubly, triply and quadruply charged cationic macrocyclic complexes I-Va, bn+ (n = 1-4) formed by the coordination of [Ru(bipy)2Cl]+ to the pyridyl N-atoms of a series of meso-(phenyl)m-(meta or para-pyridyl)n-porphyrins (m + n = 4) were transferred to the gas phase and structurally characterized by electrospray ionization (ESI) mass (MS) and tandem mass (MS/MS) spectrometry. Previously known to be stable in solution and in the solid state, I-Va, bn+ are found to constitute also a new class of stable, long-lived multiply charged gas-phase ions with spatially separated charge sites. Increasing intramolecular electrostatic repulsion from Ia, b+ to IVa, b3+ facilitates in-source and tandem collision-induced dissociation (CID). However, for the quadruply charged ions Va, b4+, electrostatic repulsion is alleviated mainly by ion pairing with the CF3SO3- counterion forming the salt clusters [Va,b/CF3SO3]3+ and [Va,b/(CF3SO3)2]2+ with reduced charge states. Ion-pairing that yields [IVa,b/CF3SO3]2+ is also observed as a minor ESI process for the triply charged ions IVa, b3+. The gaseous ions I-Va, bn+ (n = 2, 3 or 4) dissociate by sequential 'charge partitioning' with the formation of two cationic fragments by the release of [Ru(bipy)2Cl]+. The meta (a) and para (b) isomers and the positional isomers II2+ and III2+ display nearly identical ESI-MS and ESI-MS/MS spectra. ESI-MS/MS of I-Va, bn+ shows that the Ru-py(P) is, intrinsically, the weakest bond since this bond breaks preferentially upon CID.     

Unusual heme-histidine bond in the active site of a chaperone

The heme chaperone CcmE is essential for the delivery of heme to c-type cytochromes. It forms an unusual transient, yet covalent, bond between an essential histidine, H130, and heme. We report on the discovery of the chemical structure of this bond solved by NMR, where the heme vinyl is cross-linked at the beta carbon to the Ndelta1 of H130. As this type of heme linkage has not been described previously in any cytochrome or hemoprotein, it represents a novel type of heme-histidine complex.     

Total synthesis of (±)-cyclooroidin

The first total synthesis of (±)-cyclooroidin, a member of the pyrrole-imidazole alkaloid family recently isolated from the sponge Agelas oroides in optically pure form, is described. The synthesis was achieved in nine linear steps, with an overall yield of 10%. Key step was a Wolff bromoketone synthesis performed on the intermediate longamide B.     

Interactions of diethylenetriaminepentaacetic acid (dtpa) and triethylenetetraaminehexaacetic acid (ttha) with major components of natural waters

The binding ability of diethylene triamine pentaacetate (dtpa(5-)) and triethylene tetraamine hexaacetate (ttha(6-)) ligands towards major components, H(+), Na(+), Mg(2+) and Ca(2+), of natural waters was studied in both single and mixed ionic media at different ionic strengths and at T=25 degrees C. Some measurements, performed in Mg(2+)-Ca(2+) mixtures, allowed us to find the formation of new mixed species MgCa(dtpa), MgCa(ttha) and MgCaH(ttha), here reported for the first time. All the complexes formed in the various systems were characterized in terms of both stoichiometry and stability, and an attempt was made to find general rules for the stability of mixed metal complexes in comparison with that of simple species. To obtain quantitative information on the complexing ability of dtpa and ttha in seawater, measurements have been carried out in artificial seawater ionic medium (Na(+), K(+), Ca(2+), Mg(2+), Cl(-) and SO(4)(2-)). Calculations, performed by considering the salt mixture as single salt BA, allowed us to find some quite stable B(i)H(j)L species. Under the natural seawater conditions [S(salinity)=35], we found for the most important species logbeta( B(dtpa))=9.64 and. Literature data comparison is also reported.     

One-step electrochemical synthesis of pure poly(2,5-dicyano-p-phenylenevinylene) films

In this communication we describe the electrochemical synthesis of poly(2,5-dicyano-p-phenylenevinylene) (DCNPPV) polymer films on indium tin oxide substrates. We investigate the purity, morphology, absorption and emission properties of the film. The purity was checked by infrared spectroscopy. The film formed presented spectroscopic purity equivalent to the chemically prepared PPV that was dialyzed for one week. Scanning electron microscopy of the surface revealed a grain-like morphology. The absorption and emission spectra showed absorption and emission bands at 420 nm and 575 nm, respectively, with the absorption onset at 422 nm, which corresponds to an energy gap of 2.25 eV. The electrochemical determination of the energy gap gives 2.05 eV, thus quite close to the optical energy gap at the onset of absorption. The EA and IP were determined by electrochemical measurements and are 3.46 eV and 5.51 eV, respectively.

A synthetic divalent cholera toxin glycocalix[4]arene ligand having higher affinity than natural GM1 oligosaccharide

A high-affinity ligand of cholera toxin, the divalent glycocalix[4]arene 1, was obtained by exploiting a combination of structure-based design of glycomimetic monovalent ligands and affinity enhancements by multivalent presentation through a calix[4]arene scaffold. It exhibits a slightly higher affinity for the toxin than its natural ligand, the GM1 oligosaccharide.     

Binding of polyanions by biogenic amines. II. Formation and stability of protonated putrescine and cadaverine complexes with carboxylic ligands

The formation and stability of protonated diamines-carboxylic ligand complexes was studied potentiometrically (H(+)-glass electrode). Species formed are ALH(r) (A=cadaverine, putrescine, L=acetate, malate, tartrate, malonate, citrate, 1,2,3-propanetricarboxylate, 1,2,3,4-butanetetracarboxylate and glutamate; r=1...m+1, where m is the maximum degree of protonation of the carboxylic ligand), and their stability is a function of charges involved in the formation reaction. For the equilibrium H(i)A(i+)+H(j)L((j-z))=ALH((i+j-z))(i+j) the following linear relationships can be written: logK(1j)=-0.25+0.75 |j-z|, logK(2j)=0.50+0.90 |j-z| (by also considering some ethylenediamine and 1,2-diaminopropane complexes). Medium effects were considered. Comparison was made with analogous inorganic polyanion complexes. The simplest relationships -DeltaG(0)=6.5+/-0.3 and -DeltaG(0)=7.9+/-0.6 kJ mol(-1)n(-1) (n=number of possible salt bridges) were found for carboxylic and inorganic anions, respectively.     

Reduction of sulfoxides with boranes catalyzed by MoO2Cl2

The first example of an organic reduction with boranes catalyzed by a high valent oxo-complex is reported. The systems catecholborane/MoO₂Cl₂(H₂O)₂ (5 mol %) and BH₃·THF/MoO₂Cl₂ (5 mol %) proved to be very efficient for the reduction of sulfoxides to the corresponding sulfides in excellent yields.     

Under pressure: predicting pressurized metered dose inhaler interactions using the atomic force microscope

Drug particulate interactions in pressurized metered dose inhalers (pMDI) may lead to a decrease in aerosolization efficiency and subsequent efficacy in patient treatment. The interactions between salbutamol sulfate (commonly used in Ventolin pMDIs) and a series of pMDI canister materials were investigated using the atomic force microscope (AFM) colloid probe technique. Approximately 4000 individual force-distance curves were determined for a drug probe and three surfaces (10 x 10 mum areas) in situ, in a model propellant. The area under each force-distance curve was integrated to obtain separation energy values. Median separation energy values followed the rank order borosilicate glass > aluminum > PTFE, suggesting PTFE to be the most suitable canister coating.