Membrane-immobilized haptoglobin as affinity matrix for a hemoglobin-A1c immunosensor

An amperometric immunosensor for hemoglobin-A1c (HbA1c) determination has been developed utilizing membrane-immobilized haptoglobin as affinity matrix fixed in front of a Pt-working electrode. The HbA1c assay was carried out in a two-step procedure including the selective hemoglobin enrichment on the sensor surface and the specific HbA1c detection by a glucose oxidase (GOx) labeled anti-HbA1c antibody. Hydrogen peroxide generated by the enzyme label was oxidized at +600 mV versus Ag/AgCl. A standard curve for HbA1c was obtained with a linear range between 0 and 25% HbA1c of total hemoglobin which correspond to 7.8–39 nM. ELISA studies confirmed the advantage of a sandwich-type format with haptoglobin as capture molecule for selective hemoglobin binding over the direct adsorption method. Results by the sandwich immunoassay showed a linear correlation within the clinically relevant range 5–20% (CV < 3). For sensor application the immobilization procedure of haptoglobin onto CDI-activated cellulose membranes was optimized.     

Comparison of procedures for correction of matrix interferences in the multi-element analysis of soils by ICP-AES with a CCD detection system

Three procedures, matrix matching, plasma optimisation and single-point standard-addition, have been evaluated to ascertain the best procedure for simultaneous multi-element analysis of industrial soils by ICP-AES with CCD detection. A standard reference material, CRM143 from the Bureau Communautaire de Réference (BCR), has been analysed for Cd, Cr, Cu, Mn, Ni and Pb using the three different matrix interference correction procedures. All three procedures give comparable results which are in good agreement with the BCR values, except for Cr. The single-point standard addition procedure was chosen, on the basis of economy and ease of implementation, to correct for matrix interferences in the determination of Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sn and V in soil samples collected from an industrial site in England. Concentrations of some of the elements were found to vary greatly with sampling depth. For example, the concentration of Mn, determined using the atomic line at 279.920 nm, increased from 426 ± 3 g/g at a depth of 18–28 cm to 5996 ± 144 g/g at 60–85 cm.     

Structure of the products of the cyclization in acetic anhydride of β-(2-carboxy-5-chlorophenylamino) propionic acid and its nitrile

-(2-Carboxy-5-chlorophenylamino)propionic acid cyclizes in acetic anhydride to form 4-chloro-2-(2,4-dioxopiperidino)benzoic acid, which subsequently undergoes conversion into its lactone. Under the same conditions, -[acetyl(2-carboxy-5-chlorophenyl)amino]-propionitrile forms 7-chloro-1--cyanoethyl-1,2,3,4-tetrahydroquinoline-2,4-dione. The structures of the compounds obtained were confirmed by their IR, UV, and PMR spectra. An evaluation of the stability of the ketonic and enolic forms of the compounds obtained on the basis of calculations by Hückel's method has been made.Translated from Khimiya Geterotsiklicheskikh Soedinenii, Vol. 6, No. 7, pp. 879–884, July, 1970.     

The role of dimeric molecules of metalloporphyrins in phototransfer of an electron through liposome membranes

Conclusions Charge separation in solutions of liposomes sensitized by MP at low temperatures and apparently also at 20°C takes place according to a mechanism of two-quantum photoionization of dimeric molecules of the metalloporphyrins.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 277–282, February, 1985.     

Laser-induced charge transfer in the LiH3+ quasi-molecule

The laser-induced charge-transfer cross section for Li³⁺ + H collisions is calculated using the perturbation approach of Copelang and Tang, and is compared to the collision-induced cross section. The validity of perturbation theory and the use of simple criteria based on the Landau-Zener formula to extend the usefulness of the theory are examined.     

Behaviour and design considerations for continuous flow closed-open-closed liquid microchannels

This paper introduces a method of combining open and closed microchannels in a single component in a novel way which couples the benefits of both open and closed microfluidic systems and introduces interesting on-chip microfluidic behaviour. Fluid behaviour in such a component, based on continuous pressure driven flow and surface tension, is discussed in terms of cross sectional flow behaviour, robustness, flow-pressure performance, and its application to microfluidic interfacing. The closed-open-closed microchannel possesses the versatility of upstream and downstream closed microfluidics along with open fluidic direct access. The device has the advantage of eliminating gas bubbles present upstream when these enter the open channel section. The unique behaviour of this device opens the door to applications including direct liquid sample interfacing without the need for additional and bulky sample tubing.