Liquid crystal orientation in elliptic droplets in nematic emulsions

Elliptic droplets of nematic liquid crystal dispersed in a fluid organic monomer were obtained by phase separation from an isotropic mixture consisting of an organic monomer and a nematic liquid crystal contained in a poly(ethylene terephthalate) cell with inner surfaces treated with rubbed polyimide. The elliptic shape is a consequence of the constraint upon droplet growth along the direction perpendicular to the cell surfaces owing to the small thickness. Then, the resulting droplets will have a contact area with the inner surfaces of the cell treated with polyimide, which will impart a planar orientation on the liquid crystal in the droplet. By means of an optical microscope, using a simple pin hole of 5 μ m, we have selected single droplets for a series of samples having different contact areas. By polarized infrared spectroscopy we have also studied the liquid crystal orientation in selected areas of the droplets. We then report the dependence of the order parameter of the liquid crystal on different contact areas with the alignment surface of the cell. The good degree of planar alignment of the liquid crystal in the elliptic droplets allows the use of such a technique for realizing electro-optical films operating in the reverse mode. We report the electro-optical transmission of reverse mode films with different sizes of elliptic droplet.     

Application of umbelliferone molecularly imprinted polymer in analysis of plant samples

The molecularly imprinted polymers (MIPs) were synthesised and the influence of the type of porogen, the nature of sample solvent, and the binding capacity of material were tested by high-performance liquid chromatography (HPLC). Umbelliferone was used as the template for imprint formation. Methacrylic acid was used as the monomer and acetonitrile, ethanol, and chloroform as porogen. Non-imprinted polymers (NIPs) were prepared by the same procedure. The highest value of the specific binding capacity (269 μg of umbelliferone per 100 mg of polymer) was obtained for polymers prepared in chloroform as porogen and methanol/water (φ _r = 1: 1) as the sample solvent. The group-selective MIP was used as sorbent for the SPE pre-treatment of umbelliferone from plant extracts prior to HPLC analysis. Analysis of the spiked samples showed good recoveries (> 77 %). The limit of detection, limit of determination, and repeatability of the method were also calculated.     

On the complexation of some univalent cations with 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6 in nitrobenzene saturated with water

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺ (aq) + 1·Cs⁺ (nb) ? 1·M⁺ (nb) + Cs⁺ (aq) taking place in the two-phase water–nitrobenzene system (M⁺ = Ag⁺, K⁺, Rb⁺, Tl⁺; 1 = 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6; aq is aqueous phase, nb is nitrobenzene phase) were determined. Moreover, the stability constants of the 1·M⁺ complexes in water-saturated nitrobenzene were calculated; they were found to increase in the series of K⁺ < Rb⁺ < Ag⁺ < Tl⁺.     

Heptametallic,Octupolar Nonlinear Optical Chromophores with Six Ferrocenyl Substituents

New complexes with six ferrocenyl (Fc) groups connected to Zn^II or Cd^II tris(2,2′‐bipyridyl) cores are described. A thorough characterisation of their BPh₄^? salts includes two single‐crystal X‐ray structures, highly unusual for such species with multiple, extended substituents. Intense, visible d(Fe^II)→π* metal‐to‐ligand charge‐transfer (MLCT) bands accompany the π→π* intraligand charge‐transfer absorptions in the near UV region. Each complex shows a single, fully reversible Fe^III/II wave when probed electrochemically. Molecular quadratic nonlinear optical (NLO) responses are determined by using hyper‐Rayleigh scattering and Stark spectroscopy. The latter gives static first hyperpolarisabilities β₀ reaching as high as approximately 10^?27 esu and generally increasing with π‐conjugation extension. Z‐scan cubic NLO measurements reveal high two‐photon absorption cross‐sections σ₂ of up to 5400 GM in one case. DFT calculations reproduce the π‐conjugation dependence of β₀, and TD‐DFT predicts three transitions close in energy contributing to the MLCT bands. The lowest energy transition has octupolar character, whereas the other two are degenerate and dipolar in nature.     

Electrochemical behavior in simulated body fluid of TiO2 nanotubes on TiAlNb alloy elaborated in various anodizing electrolyte

The present study is focused on tailoring the morphology of TiO₂ nanotubes obtained on Ti6Al7Nb alloy and evaluating their electrochemical behavior in simulated body fluid. The presence of the α and β phases on the Ti6Al7Nb alloy leads to a two‐scale organization of the nanotubes on the samples – which in turn affects the electrochemical stability. Furthermore, five different types of TiO₂ nanotubes were obtained in various electrolytes (e.g. Generation I, a mixture of Generation II and Generation III, Generation III). Electrochemical behavior analysis of all obtained nanotubes morphologies was composed of Tafel plots, cyclic voltammetry and electrochemical impedance spectroscopy and was correlated with morphology data obtained from SEM (nanotubes diameters from top‐view and nanotube length from cross‐section view). The electrochemical results showed that morphological modifications of the Ti6Al7Nb alloy's surface by electrochemical anodizing have induced changes to the electrochemical behavior of the material, evident in the corrosion rates. Copyright © 2014 John Wiley & Sons, Ltd.     

Methodological aspects of an off‐line combination of preparative isotachophoresis and high‐performance liquid chromatography with mass spectrometry in the analysis of biological matrices

This work reports on some methodological aspects of an off‐line combination of preparative ITP and HPLC with mass spectrometric detection (pITP‐HPLC‐MS) and its potential applications to the analysis of high molecular mass compounds present in complex biological matrices from the analytical chemistry perspective. Lysozyme served as the model analyte and human saliva as the complex biological matrix in this study. A mixture of five low‐molecular mass compounds was found and successfully used in the pITP experiments as discrete spacers to isolate the analyte from the interferents present in the complex biological matrix and to minimize their disturbance effect on the final MS analysis. The experiments at the pITP stage were performed in the cationic mode. On‐column conductivity detectors were used for the detection of ITP zones. Lysozyme was found in the human saliva samples using just deconvolution of the MS data after background correction. The MS data obtained from HPLC‐MS analysis of pITP fractions exhibited the great analytical potential of the combination of pITP‐HPLC‐MS resulting from the ITP clean‐up effect as well as the ITP preconcentration of the analyte present at low concentration levels in complex biological matrices.     

Study of the retention behavior of iodinated X‐ray contrast agents in hydrophilic interaction liquid chromatography,comparing bare silica and zwitterionic stationary phases

Iodinated X‐ray contrast media are the most widely used pharmaceuticals for intravascular administration in X‐ray diagnostic procedures. The increasing concern of the fate of these compounds into the environment has led to the development of analytical methods to determine them. However, these methods present problems due to the polar character of these analytes. In this paper, hydrophilic interaction LC is presented as an alternative technique. The retention of iodinated X‐ray contrast media was studied in two bare silica phases with different particle designs (i.e. porous and Fused Core?) and a zwitterionic sulfoalkylbetaine phase. The effect of the most important parameters of the mobile phase was studied for each stationary phase. It was observed that optimal mobile phase conditions included buffers with a high buffering capacity. Additionally, the retention mechanisms involved were studied in order to provide some insight into the possible occurring interactions. The contributions of partition and adsorption and the effect of the temperature on the retention of analytes were evaluated on all of the stationary phases.     

Trends in single-cell analysis by use of ICP-MS

The analysis of single cells is a growing research field in many disciplines such as toxicology, medical diagnosis, drug and cancer research or metallomics, and different methods based on microscopic, mass spectrometric, and spectroscopic techniques are under investigation. This review focuses on the most recent trends in which inductively coupled plasma mass spectrometry (ICP-MS) and ICP optical emission spectrometry (ICP-OES) are applied for single-cell analysis using metal atoms being intrinsically present in cells, taken up by cells (e.g., nanoparticles), or which are artificially bound to a cell. For the latter, especially element tagged antibodies are of high interest and are discussed in the review. The application of different sample introduction systems for liquid analysis (pneumatic nebulization, droplet generation) and elemental imaging by laser ablation ICP-MS (LA-ICP-MS) of single cells are highlighted. Because of the high complexity of biological systems and for a better understanding of processes and dynamics of biologically or medically relevant cells, the authors discuss the idea of “multimodal spectroscopies.”