Tricarbonyl rhenium(I) complexes containing a bridging 2,5-diphenyl-1,3,4-oxadiazole ligand: structural, spectroscopic, electrochemical, and computational characterization

The three complexes [Re2(mu-X1)(mu-X2)(CO)6(mu-ppd-kappaN3:kappaN4)] (X1, X2 ) H, 1; X1 ) H, X2 ) Cl, 2; X1, X2 ) Cl, 3; ppd) 2,5-diphenyl-1,3,4-oxadiazole) have been synthesized by different routes, involving the reaction of [Re4(mu3-H)4(CO)12]with ppd for 1, the reaction of 1 with HCl for 2, and the reaction of [ReCl(CO)5] with ppd for 3. The three complexes possess a different number of valence electrons, so the formal Re-Re bond order varies from 2 to 1 to 0 in complexes 1, 2, and 3, respectively. This is reflected in the Re-Re bond distance (277.9, 297.9, and 358.5 pm in the same series)and in the stability of the complexes in the coordinating solvent acetonitrile (t1/2 for ppd displacement 13.6, 4.5, and 3.7 h,for 1, 2, and 3, respectively). Both experimental and calculated structures indicates that coordination induces a distortion from planarity of the diphenyloxadiazole moiety due to the interaction of the equatorial carbonyls with the bridging ppd,which increases on going from 1 to 2 to 3 (dihedral angle between the oxadiazole and the phenyl rings 18.4 degrees, 23.3 degrees, and 45.0 degrees, respectively). The UV spectra show pi-pi* transitions of the oxadiazole ligand (which shift to higher energy on increasing the distortion from the planarity, from 252 to 267 nm) and metal-to-ligand charge transfer absorptions (from 300 to 362 nm). Upon irradiation between 340 and 380 nm, complex 2 only features a weak broad emission at 527 nm(phi)0.02%), whereas upon excitation at 300 nm, the emission typical of free ppd is observed, suggesting photodissociation.Cyclic voltammetry investigations in acetonitrile showed that the three complexes exhibit ligand-centered irreversible reduction peaks (from -1.83 to -1.93 V vs Fc+|Fc), shifted to more positive values with respect to free ppd (-2.50 V). The shift however is smaller than in the analogous derivatives containing 1,2-diazines, suggesting a smaller electron depletion of the heterocycle ligand upon coordination. The complexes also show a metal-centered, bi-electronic, irreversible oxidation peak (from 1.05 to 1.37 V vs Fc+/Fc). A combined density functional and time-dependent density functional (TD DFT)study allowed us to understand the factors affecting the stability of the three complexes and to rationalize their electrochemical and photophysical properties in terms of their electronic structure.     

Potential Anti-Inflammatory Effect of Rosmarinus officinalis in Preclinical In Vivo Models of Inflammation

This systematic review aimed to evaluate the potential anti-inflammatory effect of Rosmarinus officinalis in preclinical in vivo models of inflammation. A search was conducted in the databases PubMed, Scopus, and Web of Science, with related keywords. The inclusion criteria were inflammation, plant, and studies on rats or mice; while, the exclusion criteria were reviews, studies with in vitro models, and associated plants. The predominant animal models were paw edema, acute liver injury, and asthma. Rosemary was more commonly used in its entirety than in compounds, and the prevalent methods of extraction were maceration and hydrodistillation. The most common routes of administration reported were gavage, intraperitoneal, and oral, on a route-dependent dosage. Treatment took place daily, or was single-dose, on average for 21 days, and it more often started before the induction. The most evaluated biomarkers were tumor necrosis factor (TNF)-α, interleukin (IL)-1β, IL-6, IL-10, myeloperoxidase (MPO), catalase (CAT), glutathione (GSH), glutathione peroxidase (GPx), malondialdehyde (MDA), and superoxide dismutase (SOD). The best results emerged at a dose of 60 mg/kg, via IP of carnosic acid, a dose of 400 mg/kg via gavage of Rosmarinus officinalis, and a dose of 10 mg/kg via IP of rosmarinic acid. Rosmarinus officinalis L. showed anti-inflammatory activity before and after induction of treatments.     

Antiproliferative and Antimicrobial Effects of Rosmarinus officinalis L. Loaded Liposomes

Rosmarinus officinalis L. is a species that is widely known for its culinary and medicinal uses. The purpose of the present study consisted of the evaluation of the antiproliferative and antimicrobial effects of R. officinalis-loaded liposomes (L-R). Characterization of the liposomes was performed by establishing specific parameters. The load of the obtained liposomes was analyzed using an LC-MS method, and antiproliferative assays evaluated the cell viability on a liver adenocarcinoma cell line and on a human hepatic stellate cell line. Antimicrobial assays were performed by agar–well diffusion and by broth microdilution assays. The obtained liposomes showed high encapsulation efficiency, suitable particle size, and good stability. High amounts of caffeic (81.07 ± 0.76), chlorogenic (14.10 ± 0.12), carnosic (20.03 ± 0.16), rosmarinic (39.81 ± 0.35), and ellagic (880.02 ± 0.14) acids were found in their composition, together with other polyphenols. Viability and apoptosis assays showed an intense effect on the cancerous cell line and a totally different pattern on the normal cells, indicating a selective toxicity towards the cancerous ones and an anti-proliferative mechanism. Antimicrobial potential was noticed against all tested bacteria, with a better efficacy towards Gram-positive species. These results further confirm the biological activities of R. officinalis leaf extract, and proposes and characterizes novel delivery systems for their encapsulation, enhancing the biological activities of polyphenols, and overcoming their limitations.     

Magnetic measurement of transport AC losses in Bi-2223/Ag tapes

Magnetic nature of the losses in superconducting wire carrying AC current implies that it should be possible to determine these losses in a contactless way. Ribbon-like samples are quite favorable for such an experiment, because a notable portion of magnetic flux related to losses ‘escapes' the sample volume and can be detected by an appropriate pick-up coil. In this case, a model describing the AC current penetration into the tape, based, e.g., on the critical state model, allows one to derive the losses from the pick-up coil signal. Because this signal is proportional to the number of coil turns, extension of the accessible range of measured voltages (and losses) can be achieved. We demonstrate the data obtained on a 1 cm long portion of a low-loss multifilamentary tape carrying AC current with frequency 35 Hz. The pick-up coil technique allowed us to reach loss level more than one order below the experimental limit for direct measurements.     

One-step labelling of sphingolipids via a scrambling cross-metathesis reaction

The alkyl chain in the backbone of sphingosine derivatives can be exchanged with functionalised (labelled) side chains in a single step under cross-metathesis reaction conditions.     

Sensitive Determination of 17β-Estradiol using a Magneto Sensor Based on Magnetic Molecularly Imprinted Polymer

The analysis of 17β-estradiol with high sensitivity and selectivity is extremely relevant to control the impacts that this compound can cause on health and the environment. Thus, we describe the development and application of a magneto carbon paste electrode based on magnetic molecularly imprinted polymer (MCPE-MMIP) for determination of 17β-estradiol. The analyte adsorbed on the MMIP was immobilized on the electrode surface by magnetic capture. The morphological and structural characterization of the obtained MMIP suggests that the material was effectively synthesized. MCPE-MMIP showed an improvement in the sensitivity for 17β-estradiol detection when compared to electrode configurations in the absence of this material. The optimum conditions (0.10 mol L⁻¹ phosphate buffer pH 7.0) were reached by differential pulse adsorptive stripping voltammetry (DPAdSV), in which the method presented linearity ranged from 0.06 to 175 μmol L⁻¹ with limits of detection and quantification of 0.02 and 0.06 μmol L⁻¹, respectively. The proposed sensor was applied effectively in the analysis of 17β-estradiol in river water and raw milk samples, exhibiting excellent recovery values (between 96.20 and 104 %), which were confirmed by HPLC analysis.     

Thiazole Analogues of the Marine Alkaloid Nortopsentin as Inhibitors of Bacterial Biofilm Formation

Anti-virulence strategy is currently considered a promising approach to overcome the global threat of the antibiotic resistance. Among different bacterial virulence factors, the biofilm formation is recognized as one of the most relevant. Considering the high and growing percentage of multi-drug resistant infections that are biofilm-mediated, new therapeutic agents capable of counteracting the formation of biofilms are urgently required. In this scenario, a new series of 18 thiazole derivatives was efficiently synthesized and evaluated for its ability to inhibit biofilm formation against the Gram-positive bacterial reference strains Staphylococcus aureus ATCC 25923 and S. aureus ATCC 6538 and the Gram-negative strain Pseudomonas aeruginosa ATCC 15442. Most of the new compounds showed a marked selectivity against the Gram-positive strains. Remarkably, five compounds exhibited BIC₅₀ values against S. aureus ATCC 25923 ranging from 1.0 to 9.1 µM. The new compounds, affecting the biofilm formation without any interference on microbial growth, can be considered promising lead compounds for the development of a new class of anti-virulence agents.     

Transfer, amplification, and inversion of helical chirality mediated by concerted interactions of C3-supramolecular dendrimers

The synthesis, structural, and retrostructural analysis of two libraries containing 16 first and second generation C(3)-symmetric self-assembling dendrimers based on dendrons connected at their apex via trisesters and trisamides of 1,3,5-benzenetricarboxylic acid is reported. A combination of X-ray diffraction and CD/UV analysis methods demonstrated that their C(3)-symmetry modulates different degrees of packing on the periphery of supramolecular structures that are responsible for the formation of chiral helical supramolecular columns and spheres self-organizable in a diversity of three-dimensional (3D) columnar, tetragonal, and cubic lattices. Two of these periodic arrays, a 3D columnar hexagonal superlattice and a 3D columnar simple orthorhombic chiral lattice with P222(1) symmetry, are unprecedented for supramolecular dendrimers. A thermal-reversible inversion of chirality was discovered in helical supramolecular columns. This inversion is induced, on heating, by the change in symmetry from a 3D columnar simple orthorhombic chiral lattice to a 3D columnar hexagonal array and, on cooling, by the change in symmetry from a 2D hexagonal to a 2D centered rectangular lattice, both exhibiting intracolumnar order. A first-order transition from coupled columns with long helical pitch, to weakly or uncorrelated columns with short helical pitch that generates a molecular rotator, was also discovered. The torsion angles of the molecular rotator are proportional to the change in temperature, and this effect is amplified in the case of the C(3)-symmetric trisamide supramolecular dendrimers forming H-bonds along their column. The structural changes reported here can be used to design complex functions based on helical supramolecular dendrimers with different degree of packing on their periphery.     

Aggregation induced colour change for phosphorescent iridium(III) complex-based anionic surfactants

We describe a new class of water soluble metallosurfactant molecules based on luminescent neutral iridium(III) complexes. The compounds possess an alkyl chain terminated with a negatively charged group, a sulphate. Due to their amphiphilic nature they assemble in aggregates in water and their photophysical properties, as well as the morphological characterization of the assemblies are presented. In particular, UV-Vis absorption, steady-state and time-resolved emission spectroscopy, dynamic light scattering and scanning electron microscopy techniques have been employed towards the analysis of the assemblies in different media. Comparison with the single components shows that the aggregates have very different photophysical properties. Importantly, the change in colour upon self-assembly is a remarkable feature which could be used for the design of probes which can change properties in different environments.