Solvation of Aniline in Mixtures of Water with N,N-Dimethylformamide and Acetonitrile

Thermal effects of aniline solution in water-N,N-dimethylformamide (DMF) and water-acetonitrile mixtures were measured at 25°C. In almost the whole range of compositions of the mixed solvents, the thermal effects are more positive in aqueous acetonitrile than in aqueous DMF. Particular attention was given to binary solvents with a very low content of the organic cosolvent. In the mixture with the mole fraction of DMF of 10^{- 3}, the enthalpy of aniline solution is higher than in water by 5%, and in the mixture with the mole fraction of acetonitrile of 4 × 10^{- 4}, even by 15%. Features of specific solvation of aniline and an aliphatic amine (n-BuNH₂) in the water-DMF mixture were discussed taking into account the acid-base properties of the mixtures. The coefficients of pair interactions aniline-organic solvent in water and aniline-water in the organic solvent were calculated using the McMillan-Mayer theory. These coefficients correlate with the enthalpies of hydration of aprotic solvent molecules.     

Alkylation of cyclododecanone with α,ω-dibromoalkanes under conditions of phase-transfer catalysis

Alkylation of cyclododecanone with ,-dibromoalkanes Br(CH) _n Br (n=3, 4, 5) under conditions of phase-transfer catalysis in the presence of KOH results in the formation of either bicyclic ketones forn=3 and 5 or a mixture of bicyclic and spirocyclic ketones forn=4.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1436–1438, August, 1994.     

SOOT combustion. co and k catalysts supported on different supports

The catalytic combustion of particulate material was studied on cobalt catalysts promoted with potassium using different supports for its preparation. Silica, aluminium oxides and hydroxides, zirconium oxide and hydroxide were used as supports. The catalytic activity for combustion depends on the type of support used, the higher activity corresponding to the supported catalyst on zirconium oxide. TPR studies indicate that the interaction metal/support allows to explain the higher activity of the CoK/SiO₂ catalyst with respect to the CoK/Al₂O₃ but the high activity found in CoK/ZrO₂is not explained by this interaction. In all cases the Co and K improved the performance of the catalysts.     

Encapsulation of cationic ruthenium complexes into a chiral self-assembled cage

A chiral supramolecular assembly encapsulates the two cationic ruthenium sandwich complexes [CpRu(eta(6)-C(6)H(6))](+) and [CpRu(p-cymene)](+). The host-guest complexes K(11)[CpRu(eta(6)-C(6)H(6)) subset Ga(4)L(6)] (2) and K(11)[CpRu(p-cymene) subset Ga(4)L(6)] (3) were characterized by one- and two-dimensional NMR techniques as well as by electrospray mass spectrometry. Encapsulation of the prochiral complex [CpRu(p-cymene)](+) by the chiral host renders enantiotopic protons diastereotopic as evidenced by (1)H NMR spectroscopy.     

Catalytic, asymmetric synthesis of α,α-disubstituted amino acids

Copper(salen) complex 1 has been found to catalyse the asymmetric alkylation of enolates derived from a variety of amino acids. There is a clear relationship between the size of the side chain in the substrate and the enantioselectivity of the process, so that the enantioselectivity decreases in the order alanine>aminobutyric acid>allylglycine>leucine>phenylalanine>valine. A transition state model which accounts for the influence of the size of the side chain on the enantioselectivity of the reactions is presented.     

Structural characterization of chondroitin/dermatan sulfate oligosaccharides from bovine aorta by capillary electrophoresis and electrospray ionization quadrupole time-of-flight tandem mass spectrometry

An analytical approach based on high-performance capillary electrophoresis (CE) in conjunction with electrospray ionization quadrupole time-of-flight tandem mass spectrometry (ESI-QTOF-MS/MS) has been developed for providing the basis to obtain new insights into the domain structure of the glycosaminoglycan (GAG) moiety of proteoglycans. The feasibility and performance of the off-line CE/ESI-QTOF-MS approach in GAG oligosaccharide analysis were assessed by screening a chondroitin/dermatan sulfate (DS) oligosaccharide mixture obtained from bovine aorta by enzymatic depolymerization by chondroitin B lyase. The CS/DS mixture was analyzed by CE using 50 mM ammonium acetate, pH 12.0, dissolved in aqueous methanol (2:3; v/v), as a CE carrier. Structural identification of the GAG components was achieved using off-line CE/nanoESI-QTOF-MS and-MS/MS experiments. ESI-QTOF instrumental parameters were found to play an important role in the MS screening of the CE-separated GAG species. By optimizing the ESI conditions, oligosaccharides differing in chain length and degree of sulfation could be detected. The building block composition, the size of the carbohydrate chain, as well as structural features of the repeating HexA-GalNAc, HexA-GalNAc(S) units, have been determined using MS/MS by applying collision-induced dissociation at low energies. Cleavage of GAG chains by chondroitin B lyase occurs with formation of structural markers useful for identification of IdoA-containing domains.     

Polystyrene/thermoplastic starch blends with different plasticizers

Conventional plastics has a large impact in increasing the environment’s pollution. That’s why the interest has turned towards novel partially and completely biodegradable polymers. In this work, blends of polystyrene and thermoplastic starch with glycerol and Buriti (Mauritia flexuosa L.) oil as plasticizers were prepared. Samples were analyzed using TG/DTG and DSC techniques. The TG results indicated that the blends with Buriti oil are thermally more stable than those with glycerol. The DSC analysis that Buriti oil provides a higher degree of plasticization of PS, compared to the blends plasticized using glycerol under the studied conditions.     

Synthesis of jasplakinolide analogues containing a novel omega-amino acid

The synthesis of the omega-amino acid 4 is described utilizing a two-dimensional synthesis strategy combined with an enzymatic differentiation of homotopic ester groups. The amino acid 4 features two non-bonded interactions that result in conformational constraints on a cyclic construct. This amino acid was incorporated into the four macrolactams 17, 22, 31, and 37. The ring in 17 and 22 is 18-membered, whereas 31 and 37 have a 19-membered ring. The pairs with the same ring size differ in a N-methyl group. For the larger macrolactams (31 and 37) conformational analysis showed that the macrocyclic rings are somewhat more rigid than in the natural lead, the depsipeptide jasplakinolide. Nevertheless, their conformations are comparable to the natural product. There are no intramolecular hydrogen bonds, neither is the cis-rotamer populated in the N-methyl compound 37. Due to the increased flexibility of the smaller macrolactams 17 and 22 and signal overlap, a distinct solution structure could not be obtained for these compounds. The amino acid 4 should be useful for restricting the conformation of other small peptides.     

Investigation of conditions allowing the synthesis of acrylamide-based monolithic microcolumns for capillary electrochromatography and of factors determining the retention of aromatic compounds on these stationary phases

The influence of the cross-linker (concentration), the porogen (lyotrophic salt) and the solvent type as well as the type and concentration of up to three "functional", i.e., interactive monomers on the morphology and the chromatographic properties of acrylamide-based hydrophilic monoliths are investigated. High total monomer concentrations favored polymers with a rigid rather than gel-like structure. High cross-linker concentrations also favor the formation of a nodular structure. The addition of a lyotrophic salt favors the formation of small nodules especially at higher monomer concentration; the pore size of the polymer can also be modulated through the salt concentration. Suitable monoliths were further investigated as potential stationary phases for capillary electrochromatography (CEC). Depending on the type and concentration of the monomers, plate numbers between 50,000 and 100,000 were routinely obtained. The standard deviation of the run-to-run reproducibility was below 2% and that of the batch-to-batch reproducibility below 5%. A set of nine hydrophobic and polar aromatic compounds (all noncharged) was used to investigate the retention mechanism. Possible candidates for chromatographic interaction and retention in these monoliths are the hydrophobic polymer backbone itself and the alkyl, carbonyl, hydroxy, amino, amide, and charged groups introduced by the various functional monomers. Judging from our results, the carbonyl and the hydroxy functions, as well as the hydrophobic polymer backbone can be supposed to be the main sites of interaction. The charged but also the alkyl functions seem to be less important in this regard. The polymerization conditions and especially the composition of the reaction mixture have a strong influence on the behavior of the final column.