Nanomechanical recognition of N-methylammonium salts

Turning molecular recognition into an effective mechanical response is critical for many applications ranging from molecular motors and responsive materials to sensors. Herein, we demonstrate how the energy of the molecular recognition between a supramolecular host and small alkylammonium salts can be harnessed to perform a nanomechanical task in a univocal way. Nanomechanical Si microcantilevers (MCs) functionalized by a film of tetra-phosphonate cavitands were employed to screen as guests the compounds of the butylammonium chloride series 1-4, which comprises a range of low molecular weight (LMW) molecules (molecular mass < 150 Da) that differ from each other by one or a few N-methyl groups (molecular mass 15 Da). The cavitand surface recognition of each individual guest drove a specific MC bending (from a few to several tens of nanometer), disclosing a direct, label-free, and real-time mean to sort them. The complexation preferences of tetraphosphonate cavitands toward ammonium chloride guests 1-4 were independently assessed by isothermal titration calorimetry. Both direct and displacement binding experiments concurred to define the following binding order in the alkylammonium series: 2 > 3 ≈ 1 ? 4. This trend is consistent with the number of interactions established by each guest with the host. The complementary ITC experiments showed that the host-guest complexation affinity in solution is transferred to the MC bending. These findings were benchmarked by implementing cavitand-functionalized MCs to discriminate sarcosine from glycine in water.     

Structure formation of random isotactic copolymers of propylene and 1-hexene or 1-octene at rapid cooling

The effect of variation the cooling rate in a wide range between 10^?2 and 10³ K s^?1 on solidification the relaxed melt of random isotactic copolymers of propylene with low amount of 1-hexene or 1-octene has been studied. Emphasis has been placed on the structure formation at rapid cooling and an evaluation of the conditions required to permit crystallization, mesophase formation, or suppression of any ordering. The presence of low amount of either 1-hexene or 1-octene co-units in the propylene chain decreases drastically the critical cooling rate required for suppression of crystallization from about 150–200 K s^?1 in the homopolymer to about only 10 K s^?1 in the copolymers; increasing the cooling rate beyond these limits allowed mesophase formation or even generation of fully amorphous samples. The study of the kinetics of formation of specific structures is completed by a complementary analysis of the X-ray structure, morphology and superstructure of the ordered phase. The hindrance of non-isothermal crystallization and mesophase formation of random copolymers of propylene with 1-hexene or 1-octene is compared with that in propylene–1-butene copolymers; addition of only 2–3 mol% 1-hexene or 1-octene into the propylene chain leads to even larger hindrance of the ordering process than the addition of more than 10 mol% 1-butene.     

The use of sigmoid pH gradients in free-flow isoelectric focusing of human endothelial cell proteins

Prefractionation of proteins enhances the resolution of proteome analysis of whole cells. Free-flow electrophoresis (FFE) provides a useful step in various prefractionation protocols, since matrix-free isoelectric focusing (FF-IEF) performed in this machine enables the enrichment of large, easily absorbable, sensitive proteins. The impact of the FFE on the success of a proteome analysis depends on the quality of the FF-IEF separation procedure. Therefore, attempts are continuously being made to improve FF-IEF. Here, we applied sigmoid pH gradients to the prefractionation of endothelial cell proteins. Small steps of pH incline between neighboring FFE fractions were established in pH ranges, in which the proteins of interest have their pIs. With the help of this advanced technology, we separated vimentin and cytoplasmic actin as well as triosephosphate isomerase and glyceraldehyde phosphate dehydrogenase preparatively, and found a pI of 5.9 ± 0.2 for nonmuscle myosin.     

Synthesis of 2-(hetero)arylthieno[2,3-b] or [3,2-b]pyridines from 2,3-dihalopyridines, (hetero)arylalkynes,and Na2S. Further functionalizations

A simple and efficient three-step methodology is described for the first time for the synthesis of 2-(hetero)arylthieno[2,3-b] or [3,2-b]pyridines. The first step is a Sonogashira coupling from 3-bromo-2-chloropyridine or 2-bromo-3-chloropyridine with several (hetero)arylalkynes to obtain the corresponding 2- or 3-chloro(hetero)arylethynylpyridines. These were cyclized by treatment with Na₂S affording the expected 2-(hetero)arylthienopyridines. As an improvement, these reactions were also performed in one-pot, without the isolation of the Sonogashira product, giving the thienopyridines in similar or better yields, reducing significantly the reaction time after the addition of Na₂S. Further functionalizations were achieved in the thienopyridine system either by bromination in the thiophene ring or chlorination in the pyridine ring via a N-oxide intermediate, allowing metal-catalyzed coupling reactions and/or nucleophilic substitutions. The functionalization of some substituents is also possible and as an example a 1,3-diarylurea was obtained from the reaction of an aniline derivative with an arylisocyanate.     

Efficient synthesis of 5,6-dihydro-8H-[1,2,4]thiadiazino[6,5,4-de]phenanthridine 4,4-dioxide and 5,6-dihydro-8H-[1,2,4]-thiadiazino[6,5,4-ij]thieno[2,3-c]quinoline 4,4-dioxide

A new efficient and versatile synthesis to obtain different substituted 5,6-dihydro-8H-[1,2,4]thiadiazino[6,5,4-de]phenanthridine 4,4-dioxide and 5,6-dihydro-8H-[1,2,4]-thiadiazino[6,5,4-ij]thieno[2,3-c]quinolone 4,4-dioxide was developed. The four cyclic systems are achieved by a three-step synthesis proceeding under mild conditions in high yields.     

Irradiation and measurement devices and methods development for LSNAA applications at the TRIGA-ACPR core

A Large Sample Neutron Activation Analysis (LSNAA) facility has been developed at the TRIGA-Annular Core Pulsed Reactor (ACPR) operated by the Institute for Nuclear Research in Pitesti. The central irradiation cavity of ACPR can accommodate a large irradiation device. The ACPR neutron flux characteristics are well known and spectrum adjustment techniques have been successfully applied to enhance the thermal component of the neutron flux in the central irradiation cavity. An analysis methodology was developed by employing the MCNP (a general Monte Carlo N-particle transport code) code in order to estimate counting efficiency and correction factors for the major perturbing phenomena. The paper presents the development of the experimental device, the results of the neutron flux-spectrum characterization, and preliminary steps to validate the analysis methodology.     

Morphology of cold-crystallized polyamide 6

The structure of cold-crystallized polyamide 6 (PA 6) has been analyzed by wide-angle X-ray scattering, atomic force microscopy, and polarizing optical microscopy. It has been found that ordering of initially fully amorphous and glassy PA 6 on slow heating to temperatures higher than the glass transition temperature results in formation of spatially non-organized short lamellae/nodules with a size depending on the maximum annealing temperature. In contrast, melt crystallization at low supercooling is connected with formation of spherulites and laterally extended lamellae. The observed experimental results demonstrate that crystals of qualitatively different morphology and higher-order organization can be generated by variation of the pathway of crystallization. It is assumed that the different structures obtained in melt- and cold-crystallized samples are related to heterogeneous and homogeneous nucleation, respectively.     

Green synthesis of gold-chitosan nanocomposites for caffeic acid sensing

In this work, colloidal gold nanoparticles (AuNPs) stabilized into a chitosan matrix were prepared using a green route. The synthesis was carried out by reducing Au(III) to Au(0) in an aqueous solution of chitosan and different organic acids (i.e., acetic, malonic, or oxalic acid). We have demonstrated that by varying the nature of the acid it is possible to tune the reduction rate of the gold precursor (HAuCl(4)) and to modify the morphology of the resulting metal nanoparticles. The use of chitosan, a biocompatible and biodegradable polymer with a large number of amino and hydroxyl functional groups, enables the simultaneous synthesis and surface modification of AuNPs in one pot. Because of the excellent film-forming capability of this polymer, AuNPs-chitosan solutions were used to obtain hybrid nanocomposite films that combine highly conductive AuNPs with a large number of organic functional groups. Herein, Au-chitosan nanocomposites are successfully proposed as sensitive and selective electrochemical sensors for the determination of caffeic acid, an antioxidant that has recently attracted much attention because of its benefits to human health. A linear response was obtained over a wide range of concentration from 5.00 × 10(-8) M to 2.00 × 10(-3) M, and the limit of detection (LOD) was estimated to be 2.50 × 10(-8) M. Moreover, further analyses have demonstrated that a high selectivity toward caffeic acid can be achieved without interference from catechin or ascorbic acid (flavonoid and nonphenolic antioxidants, respectively). This novel synthesis approach and the high performances of Au-chitosan hybrid materials in the determination of caffeic acid open up new routes in the design of highly efficient sensors, which are of great interest for the analysis of complex matrices such as wine, soft drinks, and fruit beverages.     

Upconversion luminescence of Er3+/Yb3+ co-doped nanolangasite synthesized by a modified Pechini route

Nanopowders of langasite (La₃Ga₅SiO₁₄) doped with 1 at.% Er³⁺ and 3 at.% Yb³⁺ were synthesized for the first time by a modified Pechini route and annealed in air at 700, 750, 800, 900, and 1,000?°C. The langasite powders were characterized by XRD, FTIR and luminescence techniques. Crystallization began at 750?°C and pure langasite phase was obtained for the samples annealed at 800 and 900?°C. Traces of LaGaO₃ and Ga₂O₃ were observed in the sample annealed at 1,000?°C. Bright green and red luminescence was observed for pumping at 973?nm whose intensity increased with annealing temperature due to the removal of the adsorbed impurities and the improvement of crystallinity.     

Electrochemical Detection of Metals Using Thick Nanofibrous Nafion Web Modified Electrodes

In this work, GC electrodes modified with thick electrospun nanofibrous Nafion webs were characterized using scanning electron microscopy (SEM) and cyclic voltammetry (CV) and used for the extraction and electrochemical detection of cadmium by differential pulse voltammetry. Cadmium was detected after 10 min incubation at open circuit followed by anodic stripping using 60 s reduction at ?1.4 V. The electrode yielded well‐defined, undistorted and reproducible (RSD of 7.0 % based on 10 measurements) voltammetric response with two linear ranges from 0.1 to 3 µM (R²=0.994 ) and from 3 to 10 µM (R²=0.977) and a detection limit and sensitivity of 0.01 µM and 32 and 7.725 µA/µM for both linear portions of the curve respectively.