A Closed-Form Relation for Dimension-Dependent Two-Electron Matrix Elements of the Interelectronic Distance

The evaluation of matrix elements of two electron atoms is fundamental for the study of the electronic properties of those systems. We add to this knowledge by presenting an explicit expression for the matrix elements of the inverse of the interelectronic distance of two-electron atoms in any spatial dimension D. The basis functions used are the D-dependent hydrogenic wavefunctions {1s ²,2p ²,3d ²,4f ²,5g ²,...,21y ²,...}, extending and including, in this way, the results of the previous basis set {1s ²,2p ²,3d ²,4f ²}. The methodology used does not employ Fourier integral transforms as in previous works but hypergeometric transformation formulas.     

Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) at high temperature

The Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) were determined at temperatures of 24, 90, 120, 150, and 170°C for weight fractions of vinyl chloride between 0.2 × 10^?3 and 0.8 × 10^?3. Above 90°C, Henry's law applies; values of the constant increase with temperature from 1.8 × 10² to 5.5 × 10² atm per unit weight fraction of dissolved vinyl chloride. The heat of desorption is about 15 kJ/mole. At 24°C, the nominal Henry's law constant was smaller than would have been obtained by extrapolating the values found at higher temperature. The diffusion constants increase with temperature from about 2 × 10^?13 to 3 × 10^?7 cm²/sec. The activation energy for diffusion is about 110 kJ/mole between 90 and 170°C. Although all values were determined in the absence of air, it is likely that they apply to polymer in air. They may, therefore, be used to calculate the vinyl chloride content in the gas above poly(vinyl chloride) under specific processing conditions.     

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctan-dithioamid,Ionophor mit Selektivität für Cd2+

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctane-dithioamide, an Ionophore with Selectivity for Cd²⁺ The dioxa-dithioamide 3 behaves as a highly selective ionophore for Cd²⁺ in solvent polymeric membranes. It induces cation-permselectivity in these membranes with a transference number of 1 for Cd(NO₃)₂- and of 2 for CdCl₂-solutions. In the presence of a proton carrier, 3 may be used to selectively pump Cd²⁺ through membranes by coupling with a pH gradient.     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Statistical treatment of proficiency testing data

 There are three stages to evaluating a laboratory's results in an interlaboratory proficiency test: establishing the correct result for the test item, determining an evaluation statistic for the particular result, and establishing an acceptable range. There are a wide variety of procedures for accomplishing these three stages and a correspondingly wide variety of statistical techniques in use. Currently in North America the largest number of laboratory proficiency test programs are in the clinical laboratory field, followed by programs for environmental laboratories that test drinking water and waste water. Proficiency testing in both of these fields is under the jurisdiction of the federal government and other regulatory and accreditation agencies. Many of the statistical procedures are specified in the regulations, to assure comparability of different programs and a fair evaluation of performance. In this article statistical procedures recommended in International Organization for Standardization Guide 43, Part 1, are discussed and compared with current practices in North America. Received: 22 April 1998 · Accepted: 12 May 1998     

Surfaces and interfaces in short-period GaAs/AlAs superlattices

Photoelectron spectroscopy, in particular the angular resolved photoemission excited by ultraviolet radiation (ARUPS), provides the most direct experimental information about the electron structure of crystals, both of the bulk and of the low-index surfaces. The sensitivity of the method, as well as its difficulties, when applied to GaAs/AlAs superlattices are described. The new periodicity of these man-made crystals in the direction of their growth (e.g., in the layer-by-layer growth in molecular beam epitaxy), is responsible for opening of the new energy gaps (so-called minigaps) in the electron energy bands of crystals forming the superlattice. In addition to the well-known confinement of electrons at the valence and conduction band edges in long-period superlattices, the electron confinement to the interfaces has also been found in the vicinity of minigaps in short-period superlattices. The role of this confinement in the intensities of electrons photoemitted from superlattice surfaces is discussed. Superlattices with different thicknesses in the topmost layers represent systems with a simple change of the surface atomic structure. The predictions of one-dimensional models about a change of the surface-state energy within the band gap with a change of crystal potential termination are tested for the ideally terminated (1 0 0) surface of a very thin superlattice (GaAs)₂(AlAs)₂. The results of the energy distributions of photoemitted electrons, calculated in the one-step model of photoemission, show that the ARUPS experimental observation of surface-state shifts should be possible, at least in larger minigaps. The results indicate the possibility of a straightforward tuning of the electronic structure of the superlattice surface by geometrical means.     

One-pot tethering of organic molecules through non-symmetric malonate derivatives

A new method for one-pot chemoselective heterobifunctional cross-linking of organic molecules is described. The method is based on tert-butyldiphenylsilyl malonate and involves two sequential carbodiimide couplings with two different molecules possessing a hydroxy or an amino functionality with one intermediate one-pot fluoride deprotection.     

Photodynamic actinometry using microspheres: concept, development and responsivity

Photodynamic therapy (PDT) relies on three main ingredients, oxygen, light and photoactivating compounds, although the PDT response is definitively contingent on the site and level of reactive oxygen species (ROS) generation. This study describes the development of a novel, fluorescent-based actinometer microsphere system as a means of discerning spatially resolved dosimetry of total fluence and ROS production. Providing a high resolution, localized, in situ measurement of fluence and ROS generation is critical for developing in vivo PDT protocols. Alginate-poly-L-lysine-alginate microspheres were produced using ionotropic gelation of sodium alginate droplets, ranging from 80 to 200 microm in diameter, incorporating two dyes, ADS680WS (ADS) and Rhodophyta-phycoerythrin (RPE), attached to the spheres' inside and outside layers, respectively. To test the responsivity and dynamic range of RPE for ROS detection, the production of ROS was initiated either chemically using increasing concentrations of potassium perchromate or photochemically using aluminum tetrasulphonated phthalocyanine. The generation of singlet oxygen was confirmed by phosphorescence at 1270 nm. The resulting photodegradation and decrease in fluorescence of RPE was found to correlate with increased perchromate or PDT treatment fluence, respectively. This effect was independent of pH (6.5-8) and could be inhibited using sodium azide. RPE was not susceptible to photobleaching with light alone (670 nm; 150 Jcm(-2)). ADS, which absorbs light between 600 and 750 nm, showed a direct correlation between radiant exposure (670 nm; 0-100 Jcm(-2)) and diminished fluorescence. Photobleaching was independent of irradiance (10-40 mW cm(-2)). We propose that actinometer microspheres may provide a means for obtaining high spatial resolution information regarding delivered PDT dose within model systems during investigational PDT development and dosimetric information for clinical extracorporeal PDT as in the case of ex vivo bone marrow purging.     

Mass spectrometric analysis of porcine rhodopsin

Rhodopsin is the dim light photosensitive pigment of animals. In this work, we undertook to study the structure of rhodopsin from swine and compare it with bovine and rat rhodopsin. Porcine rhodopsin was analyzed using methodology developed previously for mass spectrometric analysis of integral membrane proteins. Combining efficient protein cleavage and high performance liquid chromatography separation with the sensitivity of mass spectrometry (MS), this technique allows the observation of the full protein map and the posttranslational modifications of the protein in a single experiment. The rhodopsin protein from a single porcine eye was sequenced completely, with the exception of two single-amino acid fragments and one two-amino acid fragment, and the gene sequence reported previously was confirmed. The posttranslational modifications, similar to the ones reported previously for bovine and rat rhodopsin, were also identified. Although porcine rhodopsin has a high degree of homology to bovine and rat rhodopsins and most of their posttranslational modifications are identical, the glycosylation and phosphorylation patterns observed were different. These results show that rhodopsin from a single porcine eye can be characterized completely by MS. This technology opens the possibility of rhodopsin structural and functional studies aided by powerful mass spectrometric analysis, using the fellow eye as an internal control.     

Synthesis and Characterization of Heterodinuclear IrCo, RuCo, IrNi, and RuNi Complexes Containing Pyrazolate and Pyrazolylborate Ligands

Treatment of the metallo ligands [ML(pz)(2)(Hpz)] (pz = pyrazolate; L = C(5)Me(5), M = Ir (1); L = mesitylene, M = Ru (3)) with [M'Cl{HB(3-i-Pr-4-Br-pz)(3)}] (M' = Co (4), Ni (5)) yields heterodinuclear complexes of formula [LM(&mgr;-pz)(2)(&mgr;-Cl)M'{HB(3-i-Pr-4-Br-pz)(3)}] (L = C(5)Me(5); M = Ir; M' = Co (6), Ni (7). L = mesitylene; M = Ru; M' = Co (8)). The related complex [Ru(eta(6)-p-cymene)(pz)(2)(Hpz)] (2) reacts with equimolar amounts of 4 or 5 to give mixtures of the corresponding bis(&mgr;-pyrazolato) &mgr;-chloro complexes [(eta(6)-p-cymene)Ru(&mgr;-pz)(2)(&mgr;-Cl)M'{HB(3-i-Pr-4-Br-pz)(3)}] (M' = Co (9), Ni (10)) and the triply pyrazolato-bridged complexes [(eta(6)-p-cymene)Ru(&mgr;-pz)(3)M'{HB(3-i-Pr-4-Br-pz)(3)}] (M' = Co (11), Ni (12)). Complex 1 reacts with 5 in the presence of KOH to give the IrNi complex [(eta(5)-C(5)Me(5))Ir(&mgr;-pz)(3)Ni{HB(3-i-Pr-4-Br-pz)(3)}] (13) whereas its reaction with 4 and KOH rendered the bis(&mgr;-pyrazolato) &mgr;-hydroxo complex [(eta(5)-C(5)Me(5))Ir(&mgr;-pz)(2)(&mgr;-OH)Co{HB(3-i-Pr-4-Br-pz)(3)}] (14). The molecular structure of the heterobridged IrCo complex (6) and those of the homobridged RuNi (12) and IrNi (13) complexes have been determined by X-ray analyses. Compound 6 crystallizes in the monoclinic space group P2(1)/n, with a = 10.146(5) ?, b = 18.435(4) ?, c = 22.187(13) ?, beta = 97.28(4) degrees, and Z = 4. Complex 12 is monoclinic, space group P2(1), with a = 10.1169(7) ?, b = 21.692(2) ?, c = 11.419(1) ?, beta = 112.179(7) degrees, and Z = 2. Compound 13 crystallizes in the monoclinic space group Cc, with a = 13.695(2) ?, b = 27.929(6) ?, c = 13.329(2) ?, beta = 94.11(4) degrees, and Z = 4. All the neutral complexes 6, 12, and 13 consist of linear M.M'.B backbones with two (6) or three (12, 13) pyrazolate ligands bridging the dimetallic M.M' units and three substituted 3-i-Pr-4-Br-pz groups joining M' to the boron atoms. The presence in the proximity of the first-row metal M' of the three space-demanding isopropyl substituents of the pyrazolate groups induces a significant trigonal distortion of the octahedral symmetry, yielding clearly different M'-N bond distances on both sides of the ideal octahedral coordination sphere of these metals.