N,N,N′,N′-Tetrabutyl-3,6-dioxaoctan-dithioamid,Ionophor mit Selektivität für Cd2+

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctane-dithioamide, an Ionophore with Selectivity for Cd²⁺ The dioxa-dithioamide 3 behaves as a highly selective ionophore for Cd²⁺ in solvent polymeric membranes. It induces cation-permselectivity in these membranes with a transference number of 1 for Cd(NO₃)₂- and of 2 for CdCl₂-solutions. In the presence of a proton carrier, 3 may be used to selectively pump Cd²⁺ through membranes by coupling with a pH gradient.     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Statistical treatment of proficiency testing data

 There are three stages to evaluating a laboratory's results in an interlaboratory proficiency test: establishing the correct result for the test item, determining an evaluation statistic for the particular result, and establishing an acceptable range. There are a wide variety of procedures for accomplishing these three stages and a correspondingly wide variety of statistical techniques in use. Currently in North America the largest number of laboratory proficiency test programs are in the clinical laboratory field, followed by programs for environmental laboratories that test drinking water and waste water. Proficiency testing in both of these fields is under the jurisdiction of the federal government and other regulatory and accreditation agencies. Many of the statistical procedures are specified in the regulations, to assure comparability of different programs and a fair evaluation of performance. In this article statistical procedures recommended in International Organization for Standardization Guide 43, Part 1, are discussed and compared with current practices in North America. Received: 22 April 1998 · Accepted: 12 May 1998     

Engineered protein cages for nanomaterial synthesis

Self-assembled particles of genetically engineered human L subunit ferritin expressing a silver-binding peptide were used as nanocontainers for the synthesis of silver nanoparticles. The inner cavity of the self-assembled protein cage displays a dodecapeptide that is capable of reducing silver ions to metallic silver. This chimeric protein cage when incubated in the presence of silver nitrate exhibits the growth of a silver nanocrystal within its cavity. Our studies indicate that it is possible to design chimeric cages, using specific peptide templates, for the growth of other inorganic nanoparticles.     

Selective, controllable, and reversible aggregation of polystyrene latex microspheres via DNA hybridization

The directed three-dimensional self-assembly of microstructures and nanostructures through the selective hybridization of DNA is the focus of great interest toward the fabrication of new materials. Single-stranded DNA is covalently attached to polystyrene latex microspheres. Single-stranded DNA can function as a sequence-selective Velcro by only bonding to another strand of DNA that has a complementary sequence. The attachment of the DNA increases the charge stabilization of the microspheres and allows controllable aggregation of microspheres by hybridization of complementary DNA sequences. In a mixture of microspheres derivatized with different sequences of DNA, microspheres with complementary DNA form aggregates, while microspheres with noncomplementary sequences remain suspended. The process is reversible by heating, with a characteristic "aggregate dissociation temperature" that is predictably dependent on salt concentration, and the evolution of aggregate dissociation with temperature is observed with optical microscopy.     

One-pot tethering of organic molecules through non-symmetric malonate derivatives

A new method for one-pot chemoselective heterobifunctional cross-linking of organic molecules is described. The method is based on tert-butyldiphenylsilyl malonate and involves two sequential carbodiimide couplings with two different molecules possessing a hydroxy or an amino functionality with one intermediate one-pot fluoride deprotection.     

Kinetics of octadecyltrimethylammonium bromide self-assembled monolayer growth at mica from an aqueous solution

We have studied the growth kinetics of self-assembled monolayers (SAMs) ofoctadecyltrimethylammonium bromide (C18TAB) on mica below the critical micelle concentration at 22, 30, 40, and 50 degrees C. A combination of atomic force microscopy, contact angle goniometry, and transmission infrared spectroscopy was used to follow the growth processes to determine the rates involved in the growth of a C18TAB SAM on mica. The growth of a SAM consisted of four distinct processes: deposition of adsorbate molecules, growth of a disordered 2D liquid phase, nucleation of islands of an ordered 2D solid phase, and subsequent growth of the solid phase. The rates of these various processes are determined, and the activation energies for several processes were calculated including those for the adsorption onto a bare substrate (20 kJ/mol), adsorption into the saturated liquid phase (100 kJ/mol), and nucleation of islands (0.3 kJ/mol). Despite the small activation barrier to island nucleation, the nucleation rate is qualitatively slow, suggesting that entropic effects dominate the nucleation rate.     

New [Mo(eta3-allyl)(CO)2L3]+ complexes with monodentate or tridentate nitrogen-donor ligands

Cationic complexes [Mo(eta(3)-allyl)(CO)2L3]+ (L3 = either nitrogen-donor tridentate ligand or three monodentate ligands) were prepared in high yield and under mild conditions using as precursors either the triflato complex [Mo(eta(3)-allyl)(OTf)(CO)2(NCMe)2] or the combination of the chloro complex [Mo(eta(3)-allyl)Cl(CO)2(NCMe)2] and the salt NaBAr'(4)(Ar'= 3,5-bis(trifluoromethyl)phenyl). The tridentate ligands employed were 2,2':6',2'-terpyridine (terpy) and cis,cis-1,3,5-cyclohexanetriamine (CHTA), whereas the monodentate ligands imidazole (im) and 3,5-dimethylpyrazole (dmpz) were chosen. In order to stabilize the labile intermediates, an excess of acetonitrile was used in most of the syntheses. However, the pyrazole complex was prepared through a nitrile-free route to avoid reactions at the coordinated nitrile. The solid state structures of [Mo(eta(3)-methallyl)(CO)2(terpy)]OTf (2), [Mo(eta(3)-methallyl)(CO)2(CHTA)]BAr'4 (3), [Mo(eta(3)-methallyl)(CO)2(NCMe)3]BAr'4 (4), [Mo(eta(3)-allyl)(CO)2(im)3]OTf (5) and [Mo(eta(3)-allyl)(CO)2(dmpz)3]BAr'4 (6) were determined by means of single-crystal X-ray diffraction.     

Heterocyclic Spiro-naphthalenones. Part III. Synthesis and reactions of some spiro [naphthalene-1,2′-pyrrolidin]-2-ones and spiro [naphthalene-2,2′-pyrrolidin]-1-ones

The spironaphthalen-2-ones 2, 10 and 18 were prepared by N-bromosuccinimide (NBS) oxidation of 1, 9 and 17 respectively, whereas spironaphthalen-1-ones 24 and 25 were obtained by treating 23 with NBS. The stereoisomeric reduction products 29, 30 and 32 obtained from 24 and 25 , gave the pentacyclic compound 33 on treatment with polyphosphoric acid.     

Photodynamic actinometry using microspheres: concept, development and responsivity

Photodynamic therapy (PDT) relies on three main ingredients, oxygen, light and photoactivating compounds, although the PDT response is definitively contingent on the site and level of reactive oxygen species (ROS) generation. This study describes the development of a novel, fluorescent-based actinometer microsphere system as a means of discerning spatially resolved dosimetry of total fluence and ROS production. Providing a high resolution, localized, in situ measurement of fluence and ROS generation is critical for developing in vivo PDT protocols. Alginate-poly-L-lysine-alginate microspheres were produced using ionotropic gelation of sodium alginate droplets, ranging from 80 to 200 microm in diameter, incorporating two dyes, ADS680WS (ADS) and Rhodophyta-phycoerythrin (RPE), attached to the spheres' inside and outside layers, respectively. To test the responsivity and dynamic range of RPE for ROS detection, the production of ROS was initiated either chemically using increasing concentrations of potassium perchromate or photochemically using aluminum tetrasulphonated phthalocyanine. The generation of singlet oxygen was confirmed by phosphorescence at 1270 nm. The resulting photodegradation and decrease in fluorescence of RPE was found to correlate with increased perchromate or PDT treatment fluence, respectively. This effect was independent of pH (6.5-8) and could be inhibited using sodium azide. RPE was not susceptible to photobleaching with light alone (670 nm; 150 Jcm(-2)). ADS, which absorbs light between 600 and 750 nm, showed a direct correlation between radiant exposure (670 nm; 0-100 Jcm(-2)) and diminished fluorescence. Photobleaching was independent of irradiance (10-40 mW cm(-2)). We propose that actinometer microspheres may provide a means for obtaining high spatial resolution information regarding delivered PDT dose within model systems during investigational PDT development and dosimetric information for clinical extracorporeal PDT as in the case of ex vivo bone marrow purging.