Die Bildungswärmen von MnSi1,73, MnSi,Mn5Si3 und Mn3Si

By means of vapor pressure measurements using theTorker method (Torsion-Knudsen Effusion Recoil) as well as theKnudsen tanspiration technique in connection with a mass spectrometer, the heats of formation of the following compounds were found to be –6.5±0.7 kcal/g atom (Mn_0.366Si_0.634), –7.8±0.6 kcal/g atom (Mn_0.50Si_0.50), –7.3±0.6 kcal/g atom (Mn_0.625Si_0.375), and –6.6±0.6 kcal/g atom (Mn_0.75Si_0.25).

---

---

Mit 7 Abbildungen     

Bestimmung von Ascorbinsäure auf Grund ihrer in einem Landolt-System ausgeübten reduzierenden Wirkung

Zusammenfassung Im Bromat-Jodid-Ascorbinsäure-System hängt die Zeit, die bis zur Jodausscheidung vergeht, von der Konzentration der Ascorbinsäure ab. Unter entsprechenden Versuchsbedingungen ist die Reaktionszeit proportional der Ascorbinsäurekonzentration. Danach kann die Ascorbinsäure sowohl mit Hilfe der Simultankomparationsmethode, als auch chronometrisch bestimmt werden. Die Genauigkeit ist ± 3% im Bereich von 5 bis 300g/5 ml. Die Grenzen der Bestimmung sind 1g bzw. 1000g Ascorbinsäure in 5 ml.

---

Determination of ascorbic acid on the basis of its reducing action in a landolt system

Summary In the bromate-iodide-ascorbic acid system, the time that elapses until the iodine appears is dependent on the concentration of the ascorbic acid. Under appropriate experimental conditions, the reaction time is proportional to the ascorbic acid concentration. Accordingly, the ascorbic acid may be determined with the aid not only of the simultaneous comparison method but also chronometrically. The precision is ± 3% in the 5–300g/5 ml range. The limits of the determination are 1g and 1000g ascorbic acid in 5 ml respectively.

     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.     

Facilitated transport of Hg(II) through novel activated composite membranes

The results presented in this work deal with the prime application of activated composite membranes (ACMs) for the transport of Hg(II) ions in a continuous extraction–re-extraction system using di-(2-ethylhexyl)dithiophosphoric acid (DTPA) as carrier. The effects of variables such as the pH, the nature of the acid and the concentration of the casting solutions on the transport of Hg(II) are also investigated. When the ACM was prepared with a 0.5 M DTPA solution and when the feed solution contained 2.5×10^–4 M Hg(II) in 0.1 M HCl, the amount of mercury extracted was greater than 76%. The re-extracted mercury was subsequently recovered by means of a stripping phase comprising 0.3 M thiourea solution in 2 M H₂SO₄, yielding 54% of the initial amount of mercury after transport had taken place for 180 min.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.     

Photodynamic actinometry using microspheres: concept, development and responsivity

Photodynamic therapy (PDT) relies on three main ingredients, oxygen, light and photoactivating compounds, although the PDT response is definitively contingent on the site and level of reactive oxygen species (ROS) generation. This study describes the development of a novel, fluorescent-based actinometer microsphere system as a means of discerning spatially resolved dosimetry of total fluence and ROS production. Providing a high resolution, localized, in situ measurement of fluence and ROS generation is critical for developing in vivo PDT protocols. Alginate-poly-L-lysine-alginate microspheres were produced using ionotropic gelation of sodium alginate droplets, ranging from 80 to 200 microm in diameter, incorporating two dyes, ADS680WS (ADS) and Rhodophyta-phycoerythrin (RPE), attached to the spheres' inside and outside layers, respectively. To test the responsivity and dynamic range of RPE for ROS detection, the production of ROS was initiated either chemically using increasing concentrations of potassium perchromate or photochemically using aluminum tetrasulphonated phthalocyanine. The generation of singlet oxygen was confirmed by phosphorescence at 1270 nm. The resulting photodegradation and decrease in fluorescence of RPE was found to correlate with increased perchromate or PDT treatment fluence, respectively. This effect was independent of pH (6.5-8) and could be inhibited using sodium azide. RPE was not susceptible to photobleaching with light alone (670 nm; 150 Jcm(-2)). ADS, which absorbs light between 600 and 750 nm, showed a direct correlation between radiant exposure (670 nm; 0-100 Jcm(-2)) and diminished fluorescence. Photobleaching was independent of irradiance (10-40 mW cm(-2)). We propose that actinometer microspheres may provide a means for obtaining high spatial resolution information regarding delivered PDT dose within model systems during investigational PDT development and dosimetric information for clinical extracorporeal PDT as in the case of ex vivo bone marrow purging.     

Gas Chromatographic Method for Routine Determination of Oleanolic and Ursolic Acids in Medicinal Plants

Summary A rapid and simple gas chromatographic method has been established for routine analysis of free oleanolic and ursolic acids in dried samples of medicinal herbs. Soxhlet extraction of triterpenes was followed by solid-phase extraction (SPE). Amounts of the compounds were measured by gas chromatography after silylation of the purified samples. Experiments were performed to establish the optimum conditions (e.g. solvent, and mode and duration of extraction) for calibration curve linearity, sensitivity, reproducibility, and recovery. The conditions used for derivatization and gas chromatographic analysis resulted in an improvement on literature data. The method devised enables accurate routine measurement of many samples in quite a short time (e.g. for chemotaxonomical screening, or quality control of herbal drugs). The practical application of the method was illustrated on five Lamiaceae species.     

Towards a better understanding of the cisplatin mode of action

We have studied how platinum(II) complexes [Pt(dien)Cl]Cl, [Pt(en)Cl2] and cisplatin react with hybrid molecules that contain sulfur and nitrogen ligands, in particular Phac-Met-linker-p5'dG (Phac = phenylacetyl), Phac-His-linker-p5'dG, Phac-His-Met-linker-p5'dG and Phac-His-Gly-Met-linker-p5'dCATGGCT. The progress of the reactions was monitored by HPLC, and by [1H,15N]-HSQC NMR when 15N-cisplatin was used. The products were isolated and characterised by using enzymatic and chemical reactions and spectroscopic techniques (UV and/or NMR spectroscopy, electrospray or MALDI-TOF mass spectrometry). The combined use of digestion with proteases and reaction with hydrogen peroxide followed by mass spectrometric analysis indicated the platinum coordination positions on the peptide moiety of the largest hybrid. Monofunctional Pt-S adducts were transformed into Pt-N complexes in which Pt-N7 bonds were formed preferentially. Most of the chelates isolated had Pt-S bonds, and, in the case of cisplatin complexes, loss of the ammine trans to sulfur gave rise to the formation of tricoordinate species with platinum-mediated peptide-nucleotide cross-links. 1,2-Intrachain platinum GpG adducts were only obtained in very small amounts (1-4%).     

Simultaneous determination of carbaryl and azinphos-methyl in water by first-derivative synchronous spectrofluorimetry

A method is proposed for the simultaneous determination of the pesticides carbaryl (CBL) and azinphos-methyl (AZM) in water by first-derivative synchronous spectrofluorimetry. It is based on the alkaline hydrolysis of both pesticides to their metabolites 1-naphthol (from CBL) and anthranilic acid (from AZM). The constant wavelength difference chosen to optimize the determination is Δλ=λ_em?λ_ex=103 nm. CBL is measured at 302/405 nm and AZM at 333/436 nm. The calibration graphs are linear between 2.0 and 500.0 ng/ml for CBL and between 1.2 and 500.0 ng/ml for AZM with detection limits of 0.62 ng/ml and 0.35 ng/ml, respectively. The precision of the method (RSD) is 2.4% at the 80.0 ng/ml level for CBL and 2.5% at the 80.0 ng/ml level for AZM. The method is applied to the determination of both analytes in samples of natural waters.     

ICP-AES detection of silicon carbide impurities volatilized in a graphite furnace with the use of carbon tetrachloride vapour

The analytical capability of high-temperature halogenation with carbon tetrachloride vapour in a graphite furnace was investigated for silicon carbide powder with known chemical composition and particle size. Intensity vs heating time curves were determined for analytical lines of Al, B, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Ti, V and Si constituents, volatilized with and without the presence of CCl₄ vapour in the furnace atmosphere. Igniting 10 mg SiC at 2100 °C for 60 s in chlorinating atmosphere, the evaporated fraction of most of the constituents was higher than 90% (for Al about 50%). The line intensity vs sample mass (4–26 mg) relationships were linear for all impurities studied, while the intensity of silicon line showed a relatively small change with the sample mass. BEC (background equivalent concentration) values for this solid sampling technique (10 mg loaded sample) were 2–20 fold lower than those calculated for the conventional solution sample introduction method.