On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Solubility product relations in the rare earth hydrous hydroxides

The solubility products for some rare earth hydroxides and their temperature dependence have been shown. Greater solubility is shown for larger atomic radii and for lower temperature.     

Electroviscous Effect in Dilute Suspensions of Alumina

A study on the electroviscous effect of alumina suspensions has been made. At the low volume fraction of the particles studied here only a first-order effect was detected. Ubbelohde-type capillary viscometers have been used. A simple method to determine the hydrodynamic constant k(1) has been proposed. The experimental primary electroviscous coefficients corresponding to different electrolyte concentrations have been compared with two different theoretical approachs (I. G. Watterson, and L. R. White, J. Chem. Soc. Faraday Trans. 2 77, 1115 (1981); F. J. Rubio-Hernández, E. Ruiz-Reina, and A. I. Gómez-Merino, J. Colloid Interface Sci. 206, 334 (1998)) and the results suggest that the presence of a dynamic Stern layer plays a certain role in this effect. Copyright 2000 Academic Press.     

Synchronization of signal sampling with liquid pulsation in systems with peristaltic pumps

Method and electronic circuitry are described for synchronization of analytical signal sampling with pulsation of liquid flow in systems with a peristaltic pump. The technique is illustrated for cathodic stripping voltammetry of manganese.     

Maßanalytische Bestimmung von Merkapto-Benzthiazol im Wärmeaustauscher eines Reaktors

Zusammenfassung Eine volumetrische Methode zur Bestimmung geringer Mengen Merkapto-Benzthiazol in der Kühlflüssigkeit von Reaktoren wurde ausgearbeitet. Es wird in ammoniakalischem Medium mit ammoniakalisehem Silbernitrat titriert. Das Merkapto-Benzthiazol bildet mit Silberionen einen weißen, flockigen Niederschlag. Der Endpunkt der Titration wird mit Hilfe der Dead-stop-Indikation bestimmt. Er wird durch eine sprunghafte Stromstärkeerhöhung (Pt-Pt-Elektrode, 500 mV und 10^–7 A Empfindlichkeit des Galvanometers) angezeigt. Die Methode wird durch Triäthanolamin, Glykol, geringe Mengen von Chlorid und Phosphat nicht gestört.

---

Summary A volumetric method has been developed for determining slight amounts of mercapto-benzthiazol in the cooling liquid of reactors. It is titrated in ammoniacal medium with ammoniacal silver nitrate. The mercapto-benzthiazol yields a colorless flocculent precipitate with silver ions. The endpoint of the titration is found by the dead stop indication. It is signalled by a sudden jump in the current strength (Pt-Pt-electrode, 500 mV and 10^–7 amp sensitivity of the galvanometer). The method is not impaired by triethanolamine, glycol, slight amounts of chloride, nor by phosphate.

---

Résumé On a mis au point une méthode volumétrique pour le dosage de faibles quantités de mercaptobenzothiazole dans le liquide de refroidissement des réacteurs. On titre en milieu ammoniacal par le nitrate d'argent ammoniacal. Le mercaptobenzothiazole forme un précipité blanc, floconneux avec les ions argent. On détermine le point d'équivalence du titrage par la méthode du «dead stop end point». Il se trouve signalé par une augmentation brusque de l'intensité (électrodes Pt-Pt, 500 mv et 10^–7 A de sensibilité du galvanomètre). La triéthanolamine, le glycol, de petites quantités de chlorures et de phosphates, ne gênent pas.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.     

Discontinuous-flow potentiometric determination of chloride in a large-volume wall-jet cell using an ion-selective electrode based on a silver chloride film chemically deposited on a silver iodide support

A robust and sensitive chloride ion-selective electrode can be prepared by modifying the surface of an iodide-selective electrode using the chemical reaction with mercuric chloride in an oxidizing medium containing excess chloride. A thin film of silver chloride is thus formed ensuring a rapid and reproducible response to chloride. The analytical parameters of this electrode are similar to those of commercial silver chloride ion-selective electrodes, but its electrical impedance and signal noise are substantially lower and the response somewhat faster. Its sensitivity toward surfactants is somewhat suppressed. The electrode was used for discontinuous flow potentiometric (DFP) determinations in a large-volume wall-jet cell in which the electrode surface can be continuously reactivated by a cleaning solution contained in the cell. The method was applied to determination of chloride in ground waters from an industrial waste dumping site. The limit of determination is low 9 mug Cl(-)/l (2.6 x 10(-7)M), the precision good (the relative standard deviation varies from 0.6 to 3.0% for chloride contents from 2.90 to 0.15 mg/l, respectively) and the method correlates satisfactorily with the results of an indirect AAS determination of chloride. The sample throughput is high-90 measurements can be carried out per hour, corresponding to 30-40 determinations per hour.     

HPLC-Electrochemical detection with graphite-poly (tetrafluoroethylene) electrode Determination of the fungicides thiram and disulfiram

The suitability of composite graphite-poly(tetrafluoroethylene) (Teflon) electrodes as amperometric indicator electrodes in HPLC detection is demonstrated. The determination of the fungicides thiram and disulfiram in the presence of ziram has been chosen as an analytical problem. The optimization of working conditions, such as the choice of the organic solvent used in the mobile phase as well as its percentage, the potential applied to the composite electrode, and the time elapsed between mixing the carbamates and the injection, has been accomplished by using the wall-jet flow-cell configuration. The effect of the acetonitrile percentage used in the mobile phase on the retention of thiram, disulfiram, ziram and phenol was evaluated. Resolution up to the baseline can be achieved with 45% acetonitrile. The sensitivity of the determination of thiram and disulfiram in the presence of a constant concentration of ziram is slightly better when using a wall-jet cell; however, the background current is higher, as well as the baseline noise and the time necessary to achieve stabilization of the baseline before the injection. Lower limits of detection for both fungicides, as well as a better repeatability, were obtained when using a thin-layer flow cell configuration. As an application, the determination of thiram in spiked apple samples, at a level of 0.5 mg thiram kg(-1) apple, has been carried out with a mean recovery of 97 +/- 3% for a significance level of 0.05.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

The effect of mechanical activation on the thermal decomposition of chalcopyrite

Experimental results on the influence of preliminary mechanical activation on the thermal decomposition of chalcopyrite are presented and discussed. The following experimental facts were found:

Analyse theoretique des lois cinetiques couramment utilisees en thermoanalyse pour l'etude des reactions solid-gaz. III. proposition d'une nouvelle methode d'approche en regime dynamique

Résumé Dans la première partie de ce travail, les auteurs mettent en évidence que la vitesse d'une réaction en régime non isotherme dépend d'un facteur supplémentaire: le régime de montée en température. Cette assertion est basée sur le fait que le taux de réactionx est une fonction de trois variables: températureT, tempst, et vitesse de chauffeT, variable qui n'avait pas été prise en considération jusqu'ici par les autres auteurs travaillant sur ce problème.Puis, se basant sur les deux hypothèses suivantes: a) l'équation de vitesse en régime isotherme est la forme limite de l'équation de vitesse en régime dynamique, b) la variation de température en régime dynamique affecte la fréquence d'apparition des germes de la nouvelle phase, une formulation théorique des loisg(x) est proposée pour le régime non-isotherme. Cette formulation est explicitée en fonction de l'écart, à une température donnée, entre les valeurs de Lnk _i (isotherme) et Lnk _d (dynamique) dans le diagramme Lnk = f(1/T).L'étude, par thermogravimétrie, de la décomposition du gypse, du sulfate de calcium semihydraté, et de l'oxalate de calcium monohydraté, réalisée en montée linéaire de température, permet de vérifier expérimentalement la formulation théorique proposée.Pour obtenir une bonne interprétation cinétique d'une réaction chimique en régime dynamique, la vitesse de chauffe ne doit pas excéder 20°/heure.

---

In the first part of this paper, the authors point out that the rate of reaction with non-isothermal kinetics depends on a supplementary factor: the heating rate. This assertion is based on the fact that the degreex of reaction is a function of three variables:T (temperature),t (time) andT (heating rate); this was not taken into account by other authors concerned with the subject.Then from the two following hypotheses: a) the rate equation for isothermal conditions is the limit form of the rate equation for non-isothermal conditions, b) the temperature change under dynamic conditions affects the frequency of nucleus formation of the new phase, a theoretical formulation of non-isothermalg(x) laws is proposed. This formulation involves the value of the difference, at constant temperature, between Ink _i (isothermal) and In k_d (dynamic) in the Ink=f(1/T) diagram.The thermogravimetric study of the dehydration of gypsum, of calcium sulfate hemihydrate, and of calcium oxalate monohydrate, under non-isothermal conditions, allows experimental verification of the theoretical formulation proposed.For a good kinetic approach of a chemical reaction under dynamic conditions, the heating rate must not exceed 20°/hour.

---

Zusammenfassung Im ersten Teil dieser Arbeit wird von den Autoren bewiesen, daß die Geschwindigkeit einer Reaktion unter nicht-isothermen Bedingungen von einem zusätzlichen Faktor, den Bedingungen des Temperaturenstiegs, abhängt. Diese Behauptung beruht auf der Tatsache, daß der Reaktionsverlauf eine Funktion dreier Variablen ist: der TemperaturT, der Zeitt und der AufheizungsgeschwindigkeitT, wobei letztere Variable bisher von den auf diesem Gebiet arbeitenden Autoren außer Acht gelassen worden ist.Nachfolgend wird an Hand der zwei Voraussetzungen, daß a) die Geschwindigkeitsgleichung unter isothermen Bedingungen die Grenzform der Geschwindigkeitsgleichung unter dynamischen Bedingungen ist und b) die Temperaturänderung unter dynamischen Bedingungen sich auf die Erscheinungsfrequenz der Keime der neuen Phase auswirkt, eine theoretische Formulierung der Gesetzeg(x) für nicht-isotherme Bedingungen vorgeschlagen. Diese Formulierung wird als Funktion der Abweichung ausgedrückt, welche bei einer gegebenen Temperatur zwischen den Werten von Lnk _i (isotherm) und Lnk _d (dynamisch) im Diagramm Lnk=f(1/T) besteht.Die bei linearem Temperaturanstieg thermogravimetrisch durchgeführte Untersuchung der Zersetzung von Gips, von Calciumsulfat Semihydrat und von Calciumoxalat Monohydrat ermöglicht die vorgeschlagene theoretische Formulierung experimentell zu bestätigen.Um unter dynamischen Bedingungen eine gute kinetische Interpretation einer chemischen Reaktion zu erhalten, darf die Aufheizungsgeschwindigkeit den Wert von 20° pro Stunde nicht überschreiten.

---

, : . , : (),t () ' ( ), , . : ) ) t(x) . Lnk _j () Lnk _d ( ) Lnk=f(1/T) . , , . , 20° .