Monolayers as models for supported catalysts: zirconium phosphonate films containing manganese(III) porphyrins

Organized monolayer films of a manganese tetraphenylporphyrin have been prepared and used as supported oxidation catalysts. Manganese 5,10,15,20-tetrakis(tetrafluorophenyl-4'-octadecyloxyphosphonic acid) porphyrin (1) has been immobilized as a monolayer film by a combination of Langmuir-Blodgett (LB) and self-assembled monolayer techniques that use zirconium phosphonate linkages to bind the molecule to the surface. Analysis by FTIR, XPS, UV-vis and polarized optical spectroscopy show that the films consist of noninteracting molecules effectively anchored and oriented nearly parallel to the surface. The monolayer films are stable to the solvent and temperature conditions needed to explore organic oxidations. The activity of films of 1 toward the epoxidation of cyclooctene using iodosylbenzene as the oxidant was compared to that of Manganese 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin (2) and 1 under equivalent homogeneous conditions. The immobilized porphyrin 1 shows an enhanced activity relative to either homogeneous reaction. The main difference between 1 and 2 is the four alkyl phosphonate arms in 1 designed to incorporate the porphyrin within the films. The increased activity of immobilized 1 is a combination of the porphyrin structure, which prohibits the formation of mu-oxo dimers even in solution, and a change in conformation when anchored to the surface. The study demonstrates that careful monolayer studies can provide useful models for the design and study of supported molecular catalyst systems.     

Rational incorporation of defects within metal–organic frameworks generates highly active electrocatalytic sites

The allure of metal–organic frameworks (MOFs) in heterogeneous electrocatalysis is that catalytically active sites may be designed a priori with an unparalleled degree of control. An emerging strategy to generate coordinatively-unsaturated active sites is through the use of organic linkers that lack a functional group that would usually bind with the metal nodes. To execute this strategy, we synthesize a model MOF, Ni-MOF-74 and incorporate a fraction of 2-hydroxyterephthalic acid in place of 2,5-dihydroxyterephthalic acid. The defective MOF, Ni-MOF-74D, is evaluated vs. the nominally defect-free Ni-MOF-74 with a host of ex situ and in situ spectroscopic and electroanalytical techniques, using the oxidation of hydroxymethylfurtural (HMF) as a model reaction. The data indicates that Ni-MOF-74D features a set of 4-coordinate Ni–O₄ sites that exhibit unique vibrational signatures, redox potentials, binding motifs to HMF, and consequently superior electrocatalytic activity relative to the original Ni-MOF-74 MOF, being able to convert HMF to the desired 2,5-furandicarboxylic acid at 95% yield and 80% faradaic efficiency. Furthermore, having such rationally well-defined catalytic sites coupled with in situ Raman and infrared spectroelectrochemical measurements enabled the deduction of the reaction mechanism in which co-adsorbed *OH functions as a proton acceptor in the alcohol oxidation step and carries implications for catalyst design for heterogeneous electrosynthetic reactions en route to the electrification of the chemical industry.

The allure of metal–organic frameworks (MOFs) in heterogeneous electrocatalysis is that catalytically active sites may be designed a priori with an unparalleled degree of control.     

Site-to-site peptide transport on a molecular platform using a small-molecule robotic arm

Peptides attached to a cysteine hydrazide ‘transporter module’ are transported selectively in either direction between two chemically similar sites on a molecular platform, enabled by the discovery of new operating methods for a molecular transporter that functions through ratcheting. Substrate repositioning is achieved using a small-molecule robotic arm controlled by a protonation-mediated rotary switch and attachment/release dynamic covalent chemistry. A polar solvent mixtures were found to favour Z to E isomerization of the doubly-protonated switch, transporting cargo in one direction (arbitrarily defined as ‘forward’) in up to 85% yield, while polar solvent mixtures were unexpectedly found to favour E to Z isomerization enabling transport in the reverse (‘backward’) direction in >98% yield. Transport of the substrates proceeded in a matter of hours (compared to 6 days even for simple cargoes with the original system) without the peptides at any time dissociating from the machine nor exchanging with others in the bulk. Under the new operating conditions, key intermediates of the switch are sufficiently stabilized within the macrocycle formed between switch, arm, substrate and platform that they can be identified and structurally characterized by ¹H NMR. The size of the peptide cargo has no significant effect on the rate or efficiency of transport in either direction. The new operating conditions allow detailed physical organic chemistry of the ratcheted transport mechanism to be uncovered, improve efficiency, and enable the transport of more complex cargoes than was previously possible.

Peptides are transported in either direction between chemically similar sites on a molecular platform, substrate repositioning is achieved using a cysteine hydrazide transporter module and a small-molecule robotic arm controlled by a rotary switch.     

A supramolecular microfluidic optical chemosensor

A supramolecular microfluidic optical chemosensor (muFOC) has been fabricated. A serpentine channel has been patterned with a sol-gel film that incorporates a cyclodextrin supramolecule modified with a Tb(3+) macrocycle. Bright emission from the Tb(3+) ion is observed upon exposure of the (mu)FOC to biphenyl in aqueous solution. The signal transduction mechanism was elucidated by undertaking steady-state and time-resolved spectroscopic measurements directly on the optical chemosensor patterned within the microfluidic network. The presence of biphenyl in the cyclodextrin receptor site triggers Tb(3+) emission by an absorption-energy transfer-emission process. These results demonstrate that the intricate signal transduction mechanisms of supramolecular optical chemosensors are successfully preserved in microfluidic environments.     

Efficient low-temperature oxidation of carbon-cluster anions by SO2

Carbon-cluster anions, CN-, are very reactive toward SO2 (sticking probability of 0.012 +/- 0.005 for C27- at 25 degrees C), in contrast to their inertness toward other common atmospheric gases and pollutants. In flow reactor experiments at ambient temperature and near atmospheric pressure, primary adsorption of SO2 by the carbon cluster anions, N = 4-60, yields CNSO2- or CN-1S-. The inferred elimination of neutral CO2 is also detected as meta-stable decay in collision-induced dissociation. At higher temperatures, the reaction of SO2 with nascent carbon clusters yields CN-1SO- as well as undetected CO. The size-dependent initial reactivity reflects the previously established structural transitions (i.e., from chain to cyclic to cage structures). Such carbon clusters are formed in sooting flames and may act as nuclei for the formation of primary soot particles and serve as models for the local structural features of active soot particle sites for black-carbon soot. The facile generation of reactive carbon-sulfide and -sulfinate units may therefore have implications for understanding the health and environmental effects attributed to the coincidence of soot and SO2.     

The separation of palladium and platinum by ion flotation

Differences in the ion flotation properties of palladium(II) and platinum(IV) chloro complexes in aqueous solutions are used to achieve separations of these metals. The anionic chloro complex PtCl^2-₆ is floated selectively with cationic surfactants of the type, RNR'₃Br, from solutions of PdCl^2-₄ and various concentrations of hydrochloric acid. The palladium(II) does not float from solutions of ? 3.0 M HCl and the platinum(IV) floated from these solutions can be recovered free of palladium. However, the separation is incomplete as much of the platinum(IV) is also unfloated from these solutions. Quantitative separations are obtained by conversion of the palladium(II) to the cationic ammine, Pd(NH₃)₄²⁺ with aqueous ammonia prior to flotation. The anionic chloro complex of platinum(IV) is unaffected by the presence of ammonia and is floated quantitatively with the surfactant n-hexadecyltri-n-propylammonium bromide from 0.01 M ammonia solutions.     

1,2-Epoxycarotinoide. 3. Mitteilung. Isolierun von 1,2-Epoxy-1,2-dihydrolycopin aus Tomaten

1,2-Epoxycarotenoids: Isolation of 1,2-Epoxy-1,2-dihydrolycopene from Tomatoes The optically active, 1,2-epoxy-1,2-dihydrolycopene was isolated from tomatoes. Its constitution was established by comparison with the racemic synthetic compound.     

The “Facilitated Transition” hypothesis as an explanation for the gemdialkyl effect

A new technique of searching the conformational space of transition states was used to explore the cause of the rate acceleration in the gem-dialkyl effect in intramolecular cyclization reactions. Several previous hypotheses were discarded and a new hypothesis was advanced based on this new data. This hypothesis, the “Facilitated Transition” hypothesis, states that increased steric hindrance reduces the overall activation energy by facilitating rotation through the transition state. The older “Reactive Rotamer” hypothesis was eliminated by generating all conformations of the starting materials using the and computer programs and demonstrating that no relationship is found between rate increase and a change in the concentration of “reactive rotamers”.     

A rapid radiochemical procedure for indium

A rapid radiochcmical procedure was developed for the separation of indium radionuclides from a mixed fission-product solution. An alcoholic pyridine solution is added to a uranium solution containing indium and tin carriers. The resulting tin precipitate is separated from the indium-containing solution by filtering through a cellulose membrane filter. The decontamination factor for tin is 2·10³. Other fission products are only partially removed. The chemical yield of indium is about 44%, and the time required for the separation is about 10 sec. After the tin-separated indium has decayed, the tin daughters of indium are removed from all the other fission products at a specified time and measured, so that the amount of indium present at the time of the tin precipitation is determined.     

Condensation of 3-methylbenzoxazolinone with α,β-unsaturated acids

The reaction between 3-methylbenzoxazolinone and some unsaturated acids in PPA leads to mixtures of compounds, depending on the acid: 6-crotonyl- (or cinnamoyl)-3-methylbenzoxazolinones, 2,3-dihydro-2,5-(or 2,7)dioxo-3-methylcyclopenta[f]benzoxazoles and 6-(3-oxo-indanyl)-3-methylbenzoxazolinones. The structure of the products was established by ¹³C and ¹H nmr spectroscopy and (or) by independent synthesis. Possible mechanisms of the reaction are discussed; when competition is possible as in the last step of the cyclization, the benzene ring shows a higher reactivity than the aromatic nucleus of the benzoxazolinone; the contrary is observed when the benzene ring is p-chloro-substituted.