cis-UROCANIC ACID FAILED TO AFFECT in vitro HUMAN LANGERHANS CELL ALLOSTIMULATORY FUNCTION

Abstract— -Urocanic acid (UCA) represents the major ultraviolet B (UVB, 290–320 nm)-absorbing component of the skin. Trans-UCA is naturally produced in the stratum corneum and converts to the cis isomer upon UVB irradiation. In this study, we examined the effect of purified cis -UCA (about 99% of cis isomer) on the human Langerhans cell (LC) allostimulatory function by using the mixed epidermal cell-lymphocyte reaction (MELR). We found that addition of increasing amounts (6.5–400 μg/mL) of purified cis-UCA or (rara-UCA did not modify the T-cell response supported by enriched LC (eLC: 8–25% LC) as well as purified LC (pLC: 70–90% LC) suspensions. Because cis-UCA had no effect on the allostimulatory function of untreated LC, we investigated whether this compound could modify T-cell proliferation induced by UVB-irradiated LC. The UVB exposure of eLC or pLC to 100 J/m² significantly inhibited the capacity of both suspensions to mount a T-cell response. However, addition of cis- UCA did not potentiate this UVB-induced immunosuppression. The eLC or pLC were then incubated with cis-UCA for 18 h at 37°C and washed before adding to allogeneic T cells. The obtained proliferative response was similar to that induced by control LC incubated in medium alone, demonstrating that pretreatment with cis -UCA did not alter human LC function. In conclusion, these results strongly suggest that cis-UCA has no direct effect on human LC antigen-presenting function.     

PHYCOBILIPROTEINS: COMPARISON OF SOLUTION AND SINGLE CRYSTAL FLUORESCENCE FOR C-PHYCOCYANIN AND B-PHYCOERYTHRIN*

Abstract— Trimeric and hexameric solution forms of C-phycocyanin (CPC) from the cyanophyte Agme-nellum quadruplicatum have been isolated and their spectral properties compared to those obtained from single crystals. Although the absorbance peak of a suspension of small C-phycocyanin crystals is red-shifted only 7 nm relative to the solution forms, the single crystal fluorescence is red-shifted 60 nm relative to the solution forms. The crystal fluorescence spectrum exhibits a single peak at LD_max= 708 nm when excited at 514.5 or 530.9 nm and two peaks (LD_max= 661 and 708 nm) when excitation occurs at 568.2 nm. Fluorescence depolarization measurements indicate that extensive energy transfer could occur for both solution and crystal forms with the latter being dependent upon the relative orientation of the crystal with respect to the excitation dipole. Similar results were obtained with B-phycoerythrin (BPE) from the red alga Porphyridium cruentum where the single crystal fluorescence is red-shifted =50nm relative to the solution spectra with two peaks (LD_max= 583 and 617 nm) observed whose relative intensities are dependent on the excitation wavelength (LD_max– 514.5 and 530.9 nm). Single crystal fluorescent lifetimes exhibited considerable shortening relative to that observed for the solution forms. The implications of these results are discussed with respect to the possible relationships of the crystalline structures to the assembly forms present within phycobilisomes.     

A study of thermal decomposition of the solid-layered fluorocarbon,poly(carbon monofluoride)

Isothermal-thermogravimetric analyses were used to obtain kinetic data on the CF_x decomposition. Weight of samplevs. time curves were obtained for compounds having stoichiometries CF_0,61, CF_0.96, CF_1.08, and CF_1.12 for several different temperatures over the range 450–650° and in both a nitrogen atmosphere and in vacuum. A small percentage of fluorine in the atmosphere was shown to strongly inhibit thermal decomposition.These experimental results were fit to various theoretical models and it was found that a satisfactory fit was obtained by use of the Avrami equation, -In(1–)=(kt)ⁿ, where is the extent of reaction,k is an apparent rate constant, andn is an apparent reaction order. The valuen=2.0 was indicated which corresponds to planar growth of the decomposed phase.This information was combined with analytical data for the gaseous and solid products of decomposition to formulate a detailed mechanism.

---

Zusammenfassung Isotherm-thermogravimetrische Analysen wurden durchgeführt um kinetische Daten über die Zersetzung von CF_x zu erhalten. Probengewicht-Zeit-Kurven wurden für Verbindungen mit stöchiometrischen Verhältnissen von CF_0.61, CF_0.96, CF_1.08 und CF_1.12 bei verschiedenen Temperaturen im Bereich von 450° bis 650°, in Stickstoff sowie im Vakuum aufgenommen. Ein geringer Prozentsatz an Fluor in der Atmosphäre wirkte stark inhibierend auf die thermische Zersetzung.Diese Versuchsergebnisse wurden verschiedenen theoretischen Modellen angepasst und es wurde gezeigt, dass mit Hilfe der Avrami-Gleichung -In (1–)=(kt)ⁿ eine befriedigende Anpassung möglich ist, wobei =Ausmaß der Reaktion, k=scheinbare Geschwindigkeitskonstante undn=scheinbare Reaktionsordnung ist. Der angedeutete Wertn=2.0 entspricht einer planaren Zunahme der zersetzten Phasen.Diese Information wurde mit analytischen Daten der gasförmungen und festen Zersetzungsprodukte kombiniert um einen Mechanismus in allen Einzelheiten zu formulieren.

---

Résumé La TG isotherme a été utilisée pour obtenir des données cinétiques sur la décomposition de CF_x. Les courbes donnant le poids de l'échantillon en fonction du temps ont été energistrées à différentes températures, entre 450 et 650°, en atmosphère d'azote et sous vide, sur des composés de composition CF_0.61, CF_0.96 et CF_1.08. Un faible pourcentage de fluor dans l'atmosphèere s'est avéré inhiber considérablement la décomposition thermique.Ces résultats expérimentaux ont été confrontés à divers modèles mathématiques. On a trouvé un ajustement satisfaisant à l'aide de l'équation d'Avrami, -In (1–)=(kt)ⁿ, où es l'avancement de la réaction,k une constante de vitesse apparente etn un ordre de réaction apparent. La valeurn=2.0 correspond à une croissance dans le plan de la phase décomposée.Cette information a été combinée avec des données analytiques sur les produits de décomposition gazeux et solides, afin de formuler un mécanisme détaillé.

---

- CF_x. — CF_0.61, CF_0.96, CF_1.08 F_1.12 450°–650°, , . . , -1(1–)= (kt)ⁿ, — , k — , n — . n=2, . , .

---

---

Abstracted in part from the Ph. D. thesis of Peter Kamarchik, Jr. Rice University, Houston, Texas, May, 1976.

---

This work was supported financially by the National Science Foundation, the U.S. Army Research Office (Durham), the National Aeronautics and Space Administration, and the Robert A. Welch Foundation. Liquid helium was provided under a grant from the Office of Naval Research.     

Synthesis of 1,4-polyisoprene support of 2-chloroethylphosphonic acid (ethephon), a stimulating compound for the latex production by the Hevea brasiliensis

2-Chloroethylphosphonic acid (ethephon) is a well known stimulating product used to improve the latex production by the rubber tree (Hevea brasiliensis). Its chemical fixation in side position of 1,4-polyisoprene chains by weak chemical bond was considered in order to prepare new derivatives having prolonged stimulating activity. The synthesis was considered by using a chemical modification procedure according to a two-step process. Firstly, an epoxidized 1,4-polyisoprene intermediate was prepared by partial epoxidation of 1,4-polyisoprene. Secondly, the grafting of 2-chloroethylphosphonic acid was achieved by using the reactivity of the P-OH acidic function (or a P-OSiMe₃ derived from P-OH) of the reagent toward oxirane rings of epoxidized 1,4-polyisoprene. It was noted that grafting yields are improved when the reaction is carried out in bulk or in a non-polar solvent, and more especially in neutral conditions, that is by replacing ethephon with its trimethylsilylated derivatives [monotrimethylsilyl 2-chloroethylphosphonic acid or, more especially, di(trimethysilyl) 2-chloroethylphosphonate]. With this latter, the addition occurs by the intermediate of the P-OSiMe₃ bond, and the formation of 2-oxo-l,3,2-dioxaphospholane structures is highly favored.     

Infrared intensities of the external modes of crystalline nitrous oxide

The absorption intensities of two infrared active lattice modes of crystalline N₂O have been measured. Both the frequencies and intensities of the external modes of N₂O have been found to be very similar to those of CO₂, and most of the differences between the spectra of CO₂ and N₂O can be explained by the differences in the quadrupole moments.     

Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) at high temperature

The Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) were determined at temperatures of 24, 90, 120, 150, and 170°C for weight fractions of vinyl chloride between 0.2 × 10^?3 and 0.8 × 10^?3. Above 90°C, Henry's law applies; values of the constant increase with temperature from 1.8 × 10² to 5.5 × 10² atm per unit weight fraction of dissolved vinyl chloride. The heat of desorption is about 15 kJ/mole. At 24°C, the nominal Henry's law constant was smaller than would have been obtained by extrapolating the values found at higher temperature. The diffusion constants increase with temperature from about 2 × 10^?13 to 3 × 10^?7 cm²/sec. The activation energy for diffusion is about 110 kJ/mole between 90 and 170°C. Although all values were determined in the absence of air, it is likely that they apply to polymer in air. They may, therefore, be used to calculate the vinyl chloride content in the gas above poly(vinyl chloride) under specific processing conditions.     

The use of Hückel theory charge densities and localization energies for the prediction of kinetic and thermodynamic factors involved in an assumed model for the hydrohalogenation of 1,3-butadiene,isoprene and chloroprene

It is assumed that the first step in the hydrohalogenation of a diene under conditions such that an ionic mechanism is operative involves the formation of a linear carbonium ion via attachment of a proton to the 1-position and that the second step involves addition of the halide ion to either the 2- or 4-positions. If it is also assumed that hyperconjugation plays some non-negligible role in the carbonium ion intermediate, then it turns out that the use of Hückel theory charge densities and localization energies predict (1) that the 1,2-product is kinetically favored in the cases of butadiene and isoprene, (2) that the 1,4-product is kinetically favored in the case of chloroprene, and (3) that the 1,4-product is thermodynamically favored in all of the above systems. All of these predictions appear to be in agreement with available experimental results.

---

Zusammenfassung Bei der Addition von Halogenwasserstoffen an die hier untersuchten Diene wird im Reaktions-ablauf ein lineares Carbeniumion angenommen. Das Proton wird in 1-Stellung addiert und in einem zweiten Schritt wird das Halogenion in 2- oder 4-Stellung angelagert. Weiter wird angenommen, daß Hyperkonjugation beim intermediären Carbeniumion eine Rolle spielt. Aus den mit der Hückel-theorie ermittelten Ladungsverteilungen und Lokalisierungsenergien läßt sich dann voraussagen, daß (1) das 1,2-Produkt bei Butadien und Isopren, (2) das 1,4-Produkt bei Chloropren kinetisch und (3) das 1,4-Produkt in allen Fällen thermodynamisch bevorzugt ist. Diese Voraussagen scheinen mit den bekannten experimentellen Resultaten übereinzustimmen.

---

Résumé On admet que l'hydrohalogénation d'un diène dans des conditions où prévaut un mécanisme ionique comporte comme première étape la formation d'un ion carbonium linéaire par addition d'un proton à la position 1 et comme seconde étape l'addition de l'ion halogène à l'une des positions 2 ou 4. Si l'on admet par ailleurs que l'hyperconjuguaison joue un rôle non négligeable dans l'intermédiaire carbonium, l'emploi de la théorie de Hückel permet de prédire à l'aide des densités de charge et des énergies de localisation (1) que le produit 1,2 est favorable du point de vue cinétique dans les cas du butadiène et de l'isoprène (2) que le produit 1,4 est favorable du point de vue cinétique dans le cas du chloroprène et (3) que le produit 1,4 est favorable du point de vue thermodynamique dans tous ces systèmes. Toutes ces prédictions sont apparemment en accord avec les résultats expérimentaux disponibles.

     

Aggregation and reactivity of the cesium enolate of 6-phenyl-alpha-tetralone: comparison with the lithium enolate

The cesium enolate of 6-phenyl-alpha-tetralone (CsPAT) has a lambda(max) in THF at about 387 nm, but the variation with concentration is too small for application of singular value decomposition. Proton-transfer studies with several indicators show that CsPAT forms monomer-tetramer mixtures with a tetramerization equilibrium constant, K(1,4) = 2.3 x 10(11) M(-3). The pK of the monomer is 23.39 on a scale where fluorene is assigned 22.9 (per hydrogen). For comparison, the lithium enolate, LiPAT, is also a monomer-tetramer with K(1,4) = 4.7 x 10(10) M(-3) and a monomer pK = 14.22. HMPA in large amounts promotes dissociation to monomer with both enolates. Ion-pair S(N)2 initial rates were measured for CsPAT with several alkyl halides and with methyl tosylate and compared with other rates with LiPAT. In all cases, the enolate monomers are much more reactive than the aggregates. Reaction of CsPAT with alkyl halides is generally C-alkylation but HMPA promotes increasing amounts of O-alkylation. A new indicator, 11-methyl-11H-benzo[b]fluorene, has a pK on the cesium scale of 23.39.     

In situ soft X-ray studies of ethylene oxidation mechanisms and intermediates on the Pt(111) surface

In situ studies of ethylene oxidation on Pt(111) have been performed using a powerful combination of fluorescence yield soft X-ray methods for temperatures up to 600 K and oxygen pressures up to 0.01 Torr. Absolute carbon coverages have been determined both in steady-state and dynamic catalytic conditions on the Pt(111) surface. Fluorescence yield near-edge spectroscopy (FYNES) and temperature-programmed fluorescence yield near-edge spectroscopy (TP-FYNES) experiments above the carbon K edge were used to identify the structure and bonding of the dominant surface species during oxidation. TP-FYNES experiments of preadsorbed ethylene coverages in oxygen pressures up to 0.01 Torr indicate a stable intermediate is formed over the 215-300 K temperature range. By comparing the intensity of the C-H sigma resonance at the magic angle with the intensity in the carbon continuum, the stoichiometry of this intermediate has been determined explicitly. Based on calibration with known C-H stoichiometries, the intermediate has a C(2)H(3) stoichiometry for oxygen pressures up to 0.01 Torr, indicating oxydehydrogenation occurs before skeletal oxidation. FYNES spectra at normal and glancing incidences were performed to characterize the structure and bonding of this intermediate. Using FYNES spectra of ethylene, ethylidyne, and acetylene as reference standard, this procedure indicates the oxidation intermediate is tri-sigma vinyl. Thus, oxidation of ethylene proceeds through a vinyl intermediate, with oxydehydrogenation preceding skeletal oxidation.