Decay of confined,two-dimensional,spatially periodic arrays of vortices: A numerical investigation

The disarrangement of a perturbed lattice of vortices was studied numerically. The basic state is an exponentially decaying, exact solution of the Navier-Stokes equations. Square arrays of vortices with even numbers of vortex cells along each side were perturbed and their evolution was investigated. Whether the energy in the perturbation grows somewhat before it decays or decays monotonically depends on the initial strength of the vortices of the basic state, the extent of lateral confinement and the structure of the perturbation. The critical condition for temporally local instability, i.e. the critical amplitude of the basic state that must be exceeded to allow energy transfer from the basic state to the perturbation, is discussed. In the strongly confined case of a square lattice of four vortices the appearance of enchancement of global rotation is the result of energy transfer from the basic state to a temporally local unstable mode. Energy is transferred from the basic state to larger-scaled structures (inverse cascade) only if the scales of the larger structures are inherently contained in the initial structure of the perturbation. The initial structure of the double array of vortices is not maintained except for a very special form of perturbation. The facts that large scales decay more slowly than small scales and that, when non-linearities are sufficiently strong, energy is transferred from one scale to another explain the differences in the disarrangement process for different initial strengths of the vortices of the basic state. The stronger vortices, i.e. the vortices perturbed in a manner that increases their strength, tend to dominate the weaker vortices. The pairing and subsequent merging (or capture) of vortices of like sense into larger-scale vortices are described in terms of peaks in the evolution of the square root of the palinstrophy divided by the enstrophy.     

Regions of stability of high-power gyrotron oscillators

The problem of mode competition in a high-power gyrotron oscillator is considered. The regions of parameter space in which a preexisting large-amplitude mode is able to suppress competing satellites are determined for cases in which the coupling coefficients and cavity quality factors for the operating and satellite modes are different. In addition, the effect of beam quality on the regimes of stable single-mode operation is investigated. Generally speaking, the requirement of stable operation favors devices whose interaction length measured by the parameter μ is not too large. It is found that for μ near 10 the operation is relatively stable and μ near 17 is not     

Single electron tunneling rates in multijunction circuits

The rate of electron tunneling through normal metal tunnel junctions is calculated for the case of ultrasmall junction capacitances. The so-called Coulomb blockade of electron tunneling at low temperatures is shown to be strongly affected by the external electrical circuit. Under the common experimental condition of a low impedance environment the Coulomb blockade is suppressed for single tunnel junctions. However, a Coulomb gap structure emerges for junctions embedded in a high impedance environment. For a double junction setup a Coulomb blockade of tunneling arises even for low impedance environments due to the charge quantization on the metallic island between the junctions. An approach using circuit analysis is presented which allows to reduce the calculation of tunneling rates in multijunction circuits to those of a single junction in series with an effective capacitance. The range of validity of the socalled local rule and global rule rates is clarified. It is found that the tunneling rate tends towards the global rule rate as the number of junctions is increased. Some specific results are given for a one-dimensional array of tunnel junctions.     

The behavior of cracked cross-ply composite laminates under shear loading

An interlaminar-shear-stress analysis developed earlier by Tsai et al. (1990, Micro-cracking-Induced Damage in Composites) for a [φ_m/θ_n], bi-directional composite laminate is used to solve the case of a cross-ply [0_m/90_n]_x laminate with the 90° layer only or both layers cracked under pure shear loading. Strains, forces and laminate shear modulus reduction due to matrix cracking were obtained. Experimental results for shear modulus as a function of crack densities were obtained by a simple shear test and they agree very well with the theoretical prediction.     

Modélisation du champ des vitesses de l'urine dans un bolus urétéralModelling of urine flow in an ureteral bolus

Urine transport is made from the kidney to the bladder through the ureter by isolated pockets called bolus. To determine the urine flow in a bolus, we use an adherence condition on the interface urine/wall. It gives us an infinite linear system verified by a set of parameters. An iterative and convergent algorithm allows us to solve this system and to determine analytically the components of the velocity vector in the bolus. To cite this article: A. Vogel et al., C. R. Mecanique 332 (2004).     

Sol-Gel Particulate Float Process to Make Vitreous Silica Bodies

Particulate sol-gel technology uses larger particles than that of alkoxide-derived gels and provides larger pore sizes in the gelled object. This allows relatively rapid drying and fabrication of large rods or tubular shapes. However, the formation of more complex or flat shapes, which require extensive surface contact with a mold, is more difficult. The shrinkage during drying, with the significantly greater stress of surface friction due to adhesion, frequently leads to cracking.We have demonstrated a solution to this problem by floating the gel on the surface of a dense liquid. Dry silica panels up to 28 × 40 × 0.7 cm³ were prepared in this way. The use of patterning molds allowed the fabrication of more sophisticated shapes. These bodies were sintered to transparent vitreous silica articles of near net dimensions.     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

New data on the ternary fission of 252Cf from the Gammasphere facility

Ternary fission of ²⁵²Cf was studied at Gammasphere using eight ΔE×E particle telescopes. Helium, beryllium, boron, and carbon light charged particles (LCPs) emitted with kinetic energy more than 9, 21, 26, and 32 MeV, respectively, were identified. The 3368-keV γ transition from the first 2⁺ excited state in ¹⁰Be was found and the population probability ratio N(2⁺)/N(0⁺) = 0.160 ± 0.025 was estimated. No evidence was found for 3368-keV γ rays emitted from a triple molecular state. For the first time, charge distributions are obtained for ternary fission fragments emitted with helium, beryllium, and carbon LCPs.     

Quantum Nonlocality of Photon Pairs in Interference in a Mach-Zehnder Interferometer

Nonlocal character of entangled photon pairs generated in spontaneous parametric downconversion is demonstrated. One photon from a pair propagates through a Mach-Zehnder interferometer and is detected in coincidence-count measurement with its twin. Width of the coincidence-count interference pattern (measured for various values of path difference in the Mach-Zehnder interferometer) depends on spectral width of the twin as a result of entanglement of photons in a pair. The experimental setup is analyzed for a Gaussian spectral filter and a Fabry-Perot resonator. It is shown that nonlocal interference is much stronger for cw pumping in comparison with femtosecond pulsed pumping for values of parameters commonly used in spontaneous parametric downconversion experiments.