Measurement of surface topography by RGB Shadow-Moiré with direct phase demodulation

In this paper we present the application of a direct demodulation method for the measurement of surface topography by means of Shadow-Moiré. In our set-up, we use three LEDs (with green, red and blue peak wavelengths) to illuminate the grating. Due to the different position of these light sources, a polychromatic Shadow-Moiré fringe pattern is produced, which can be described as the superposition of three monochromatic (red, green and blue) fringe patterns. Taking the image of this polychromatic fringe pattern with a RGB CCD camera, we get a monochromatic fringe pattern stored at each RGB channel of the CCD. The direct demodulation algorithm employed uses these fringe patterns to calculate the wrapped phase map. After unwrapping the phase map using a standard multi-grid technique, we implemented an automatic procedure to detect the area of interest of the phase map by removing low modulation zones and to calculate the absolute value of the phase. In this way it is possible to determine the topography of a surface with a single RGB snapshot maintaining a simple experimental set-up, which is an important feature, especially for the study of dynamic phenomena such as deformations. We present the experimental results obtained after measuring different objects with both smooth and rough surface textures.     

The Limiting Possibilities of Miniaturization of Open-Resonator Mirrors

Using the representation of the field of a quasioptical beam in the form of expansion over plane waves, we derive an expression determining the minimum possible size of mirrors of an open resonator (OR) in which the lowest mode with small energy losses exists. To verify the obtained expression, we study experimentally the field distribution in a semisymmetric OR using the probe method. In this case, the diameter of the scattering probe was chosen on the basis of the equation derived. The difference between the measured and calculated field distributions was smaller than 8%. It is shown that the diameter of the field spot on the OR mirrors cannot be smaller than the wavelength of a microwave oscillator. The attempts to focus a Gaussian beam to a size smaller than the wavelength lead to an increase in the diameter of the field spot.     

Approximate and Exact Small Signal Analysis for Single-Mode Fiber Near Zero Dispersion Wavelength with Higher Order Dispersion

This article presents the comparison of approximate and exact small-signal theories for analyzing the influence of the higher-order dispersion terms on dispersive optical communication systems operating near zero dispersion wavelength for linear single-mode fiber. For the approximate theory, the generalized conversion matrix has been reported and gives the transfer function of intensity and phase from the fiber input to fiber output for a laser source including the influence of any higher-order dispersion term. In addition, expressions for the small-signal frequency response and the relative intensity noise (RIN) response of an ultrafast laser diode including noises are derived. However, it is observed that the approximation assumed for the second-order dispersion term for the approximate analysis is not valid. From the approximate theory, the exact generalized conversion matrix and exact expressions for small-signal frequency response and relative intensity noise (RIN) are obtained. We show that for the exact theory, the second-order dispersion term has no effect on intensity and frequency response even at large modulating frequencies and large propagation distances contrary to the approximate theory as reported by other authors. But we show that third-order dispersion term certainly has some minute impact on the frequency and RIN response for long distance links at high modulating frequencies.     

Holographic interferometry as electrochemical emission spectroscopy of a carbon steel in 5–20 ppm TROS C-70 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, as an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, as an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion tests, EI spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of TROS C-70 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical-emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which was obtained from the EI. spectroscopy. Consequently, holographic interferometry is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Modelling for the planning and management of bed capacities in hospitals

The internal dynamics of a hospital represent a complex non-linear structure. Planning and management of bed capacities must be evaluated within an environment of uncertainty, variability and limited resources. A common approach is to plan and manage capacities based on simple deterministic spreadsheet calculations. This paper demonstrates that these calculations typically do not provide the appropriate information and result in underestimating true bed requirements. More sophisticated, flexible and necessarily detailed capacity models are needed. The development and use of such a simulation model is presented in this paper. The modelling work, in conjunction with a major UK NHS Trust, considers various types of patient flows, at the individual patient level, and resulting bed needs over time. The consequence of changes in capacity planning policies and management of existing capacities can be readily examined. The work has highlighted the need for evaluating hospital bed capacities in light of both bed occupancies and refused admission rates. The relationship between occupancy and refusals is complex and often overlooked by hospital managers.     

Performance evaluation of PVdF gel polymer electrolytes

A series of gel polymer electrolytes containing PVdF as homo polymer, a mixture of 1:1 Ethylene Carbonate (EC) : Propylene Carbonate (PC) as plasticizer and lithium-bistrifluoromethane sulphone imide [imide — LiN (CF₃SO₂)₂] has been developed. Amounts of polymer (PVdF), plasticizer and the imide lithium salt have been varied as a function of their weight ratio composition in this regard. Dimensionally stable films possessing appreciable room temperature conductivity values have been obtained with respect to certain weight ratio compositions. However, conductivity data have been recorded at different possible temperatures, i.e., from 20 °C to 65 °C. XRD and DSC studies were carried out to characterize the polymer films for better amorphicity and reduced glass transition temperature, respectively. The electrochemical interface stability of the PVdF based gel polymer electrolytes over a range of storage period (24 h – 10 days) have been investigated using A.C. impedance studies. Test cells containing Li/gel polymer electrolyte (GPE)/Li have been subjected to undergo 50 charge-discharge cycles in order to understand the electrochemical performance behaviour of the dimensionally stable films of superior conductivity. The observed capacity fade of less than 20% even after 50 cycles is in favour of the electrochemical stability of the gel polymer electrolyte containing 27.5% PVdF −67.5 % EC+PC −5% imide salt. Cyclic voltammetry studies establish the possibility of a reversible intercalation — deintercalation process involving Li⁺ ions through the gel polymer electrolyte.     

Phonon–replica transitions in InGaN/GaN quantum well structures

A side-bump feature in a photoluminescence (PL) spectrum of an InGaN compound was widely observed. With reasonable fitting to PL spectra with three Gaussian distributions, the temperature variations of the peak positions, integrated PL intensities, and peak widths of the main and first side peaks of three InGaN/GaN multiple quantum well samples with different nominal indium contents are shown and interpreted. The existence of the side peaks is attributed to phonon–replica transitions. The variations of the peak position separations and the decreasing trends of the first side peak widths beyond certain temperatures in those samples were explained with the requirement of phonon momentum condition for phonon–replica transitions. In the sample with 25% nominal indium content, the phonon–replica transition could become stronger than the direct transition of localized states.     

The absorptive pion-nucleus optical potential

We calculate s-wave and p-wave absorptive pion-nucleus optical potentials assuming that a pion is absorbed by a pair of nucleons. Employing a model which takes into account both a single nucleon absorption with nucleon-nucleon correlations and rescattering, we obtain simple analytic expressions for Im B₀ sid Im C₀ of the pion-nucleus optical potential. The off-shell effect on the s-wave pion absorption is examined and shown to be strongly modified by short range correlations. The result for the p-wave absorptive part Im C₀ clearly shows the importance of the tensor correlations. The enhanced nn emission after π^? absorption is shown to be related with a large p-wave πN scattering length a₃₃ via the tensor correlations.     

Some global results for eigenvalue problems governed by a variational inequality

In this paper, we use the Leray-Schauder degree theory to obtain some information about the structure of the solution set of a large class of eigenvalue problems governed by a variational inequality. Applications are given to the unilateral postbuckling of a thin elastic plate.