The behavior of cracked cross-ply composite laminates under shear loading

An interlaminar-shear-stress analysis developed earlier by Tsai et al. (1990, Micro-cracking-Induced Damage in Composites) for a [φ_m/θ_n], bi-directional composite laminate is used to solve the case of a cross-ply [0_m/90_n]_x laminate with the 90° layer only or both layers cracked under pure shear loading. Strains, forces and laminate shear modulus reduction due to matrix cracking were obtained. Experimental results for shear modulus as a function of crack densities were obtained by a simple shear test and they agree very well with the theoretical prediction.     

Modélisation du champ des vitesses de l'urine dans un bolus urétéralModelling of urine flow in an ureteral bolus

Urine transport is made from the kidney to the bladder through the ureter by isolated pockets called bolus. To determine the urine flow in a bolus, we use an adherence condition on the interface urine/wall. It gives us an infinite linear system verified by a set of parameters. An iterative and convergent algorithm allows us to solve this system and to determine analytically the components of the velocity vector in the bolus. To cite this article: A. Vogel et al., C. R. Mecanique 332 (2004).     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

New data on the ternary fission of 252Cf from the Gammasphere facility

Ternary fission of ²⁵²Cf was studied at Gammasphere using eight ΔE×E particle telescopes. Helium, beryllium, boron, and carbon light charged particles (LCPs) emitted with kinetic energy more than 9, 21, 26, and 32 MeV, respectively, were identified. The 3368-keV γ transition from the first 2⁺ excited state in ¹⁰Be was found and the population probability ratio N(2⁺)/N(0⁺) = 0.160 ± 0.025 was estimated. No evidence was found for 3368-keV γ rays emitted from a triple molecular state. For the first time, charge distributions are obtained for ternary fission fragments emitted with helium, beryllium, and carbon LCPs.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

Temperature dependence of pressure broadening of NH3 perturbed by H2 and N2

The temperature dependence of pressure broadening of 134 rovibrational transitions of several branches in the ν₄ and 2ν₂ bands of ammonia perturbed by H₂ and N₂ has been measured using a high-resolution Fourier transform spectrometer. The temperature range covered during the experiments was between 235 and 296 K. The pressure-broadening linewidths were obtained using the method of multipressure fitting to the measured shapes of the lines. These broadenings were also calculated using a semiclassical model leading to a reasonable agreement with the observations and reproduces well the strong systematic experimental J and K quantum number dependencies. The retrieved values of the linewidths, along with those previously determined from the spectra at room temperature, were used to derive the temperature dependence of both H₂ and N₂ broadening of NH₃ lines. The broadening coefficients were shown to fit closely the well-known exponential law. For both experimental and theoretical results, the temperature exponent n has been obtained. Careful inspection of the experimental values shows that, contrary to the linewidths, the coefficient n is nearly K independent within each J multiplet. Also for a given J it does not seem to exhibit any noticeable variation with the type of rotational transition. On the other hand, the calculated n values exhibit a strong J and K systematic dependencies. n increases with K for a given J, decreases with J for a given K and are independent of the type of rotational transition.     

Second Dissociation Constant of Bis-[(2-hydroxyethyl)amino]acetic Acid (BICINE) and pH of Its Buffer Solutions from 5 to 55 °C

The values of the second dissociation constant, K ₂, and related thermodynamic quantities of the ampholyte bis[(2-hydroxyethyl)amino]acetic acid (BICINE) have been determined at temperatures from 5 to 55 ^∘C. The pH values of six equimolal buffer solutions, and four buffer solutions having ionic strengths (I = 0.16 mol⋅kg⁻¹) similar to those in blood plasma, have been evaluated at 12 temperatures from 5 to 55 ^∘C using the Bates–Guggenheim convention. The liquid junction potentials (E _j ) between the buffer solutions of BICINE and saturated KCl solution of the calomel electrode at 25 and 37 ^∘C have been estimated by measurement with a flowing junction cell. These values of E _j have been used to ascertain the operational pH values at 25 and 37 ^∘C. The pK ₂ values at 25 and 37 ^∘C are 8.333 and 8.156, respectively. The thermodynamic quantities associated with the second acid dissociation have been calculated from the values of pK ₂ as a function of temperature. The zwitterionic buffer BICINE was shown to be useful as a pH standard in the region close to that of blood serum.     

Optimization for pattern classification using biased random search techniques

We demonstrate how optimization problems arise in the field of pattern classification, in particular in using piecewise-linear classification and classification based on an optimal linear separator. We motivate the need in this area for a general purpose optimization approach. We discuss ALOPEX, a biased random search approach, from the point of view of this need. While ALOPEX itself failed to fulfil our need, a newly-introduced generalization of it (iterated ALOPEX) was found to be appropriate for the optimization problems of our particular concern. We conclude the paper with a brief critical evaluation of this approach as compared to our original aims.     

Un théorème de type Beurling–Lax dans la boule unitéA Beurling–Lax type theorem in the unit ball

We prove a Beurling–Lax theorem for a family of reproducing kernel Hilbert spaces of functions analytic in an open subset of the unit ball containing the origin. The spaces under consideration are characterized by functions called Schur multipliers. Using the theory of linear relations in Pontryagin spaces we also give coisometric realizations of Schur multipliers. To cite this article: D. Alpay et al., C. R. Acad. Sci. Paris, Ser. I 334 (2002) 349–354.