Quantitative and high mass ToF-SIMS studies of siloxane segregation in hydrogel polymers using cryogenic sample handling techniques

This paper examines the capabilities of cryogenic sample handling to examine composition and structure of hydrogel materials where siloxane components are central to the analysis. XPS analysis of multicomponent polymers with cryogenic sample handling following exposure to aqueous environments has revealed the composition and kinetics of near surface reorganization for siloxane and fluorocarbon containing polymers. In this study we report results from a ToF-SIMS protocol for cryogenic sample handling applied to the analysis of surface changes upon hydration/dehydration of hydrogel polymers. Comparison of results from angle dependent XPS and ToF-SIMS are discussed for a range of commercial soft contact lens materials. Both methods detected changes in surface chemistry between the hydrated (frozen) and dehydrated surfaces. Analysis of the hydrated surfaces detected polymer components indicative of the commercial formulation as well as ice clusters. Analysis of the dehydrated materials detected changes in surface chemistry relative to the hydrated surface in addition to loss of water due to sample dehydration. A quantitative standard additions method for ToF-SIMS data was used to determine submonolayer amounts of PDMS impurities at the surface of the hydrogels. ToF-SIMS analysis of a series of seven poly (allyl methacrylate-g-dimethylsiloxane), AMA-g-DMS, graft copolymers in the hydrated state revealed high mass oligomeric ion distributions for systems with bulk PDMS content greater than 25 wt.%. This marks the first time that detection of high mass oligomeric ion distributions from hydrated (frozen) surfaces has been reported. Analysis of the dehydrated surface detected formation of high mass oligomeric ion distributions for systems with PDMS bulk content greater than 15 wt.%, but only detected these ion distributions in wet (frozen) samples when the bulk concentration was greater than 25 wt.%.     

Microperforated insertion units: An alternative strategy to design microperforated panels

Microperforated panels (MPPs) coupled to a rigid wall have been proposed recently as an alternative to porous absorbers in situations having concerns with bacterial contamination and small particles discharge, like food, pharmaceutical and microelectronic industries. There exists also an increasing interest for MPP absorbers in the transportation industry and civil engineering. In general, an optimally designed MPP with good broadband absorption requires many submillimetric holes distributed over a panel of also submillimetric thickness. Such thin plates or foils become so fragile that they need to be protected from mechanical damage. In this paper, an alternative strategy is investigated which allows the design of MPPs with panels of millimetric thickness while maintaining their acoustic performance. These absorbers, named microperforated insertion units (MIUs), avoid the structural problems of the classical MPPs. An assessment of the sound absorption properties of these structures is presented. Comparisons between calculations and measurements are also made under two experimental conditions: plane waves at normal incidence (impedance tube) and free field (anechoic room).     

Bayesian Object Identification: Variants

We present a Bayesian theory of object identification. Here, identifying an object means selecting a particular observation from a group of observations (variants), this observation (the regular variant) being characterized by a distributional model. In this sense, object identification means assigning a given model to one of several observations. Often, it is the statistical model of the regular variant, only, that is known. We study an estimator which relies essentially on this model and not on the characteristics of the “irregular” variants. In particular, we investigate under what conditions this variant selector is optimal. It turns out that there is a close relationship with exchangeability and Markovian reversibility. We finally apply our theory to the case of irregular variants generated from the regular variant by a Gaussian linear model.     

On the concentration and determination of plutonium in natural waters by adsorption on MnO2 filters

A new method of analysis of the efficiency of four filters of MnO₂ in series which takes into account the reactions induced in plutonium by the sorbent is described. The system of differential equations describing the behaviour of plutonium in water as it passes through the filters is solved and the parameters of the filters are determined for a best fitting of the solutions corresponding to the experimental uncertainties. The method is checked by numerical simulation and then applied to water solutions with a known plutonium concentration and to some experimental results given by other authors. In all occassions the results are consistent with the possibility of determining the contents of plutonium in sea and continental waters with uncertainties of the order of 10%.     

Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

Improvement of the properties of polyarylate reinforced with liquid crystalline polymers

Blends of polyarylate of bisphenol A, PAr, with two commercial main chain liquid crystalline polymers, Vectra A950 and Vectra B950, are studied. From dynamic viscoelastic measurements it is deduced that both systems (PAr/Vectra A950 and PAr/Vectra B950) are immiscible and scanning electron microscopy (SEM) micrographs show the presence of spherical domains of the liquid crystalline polymer when PAr constitutes the matrix. Extrusion capillary measurements reveal that, under conditions of temperature and shear rate similar to those of processing, the viscosity is reduced to approximately 10% of its value when the content of liquid crystalline polymer is only 20%. This great improvement of the rheological properties is observed in both PAr/Vectra A950 and PAr/Vectra B950 blends. The effect of draw ratio on Young's modulus for different compositions is also analyzed, pointing out the reinforcing action of both liquid crystalline polymers on polyarylate: for instance, 20% of Vectra B950 in the blend gives rise to a 700% increase of the modulus of fibres prepared at a draw ratio of 50. SEM of the extrudates reveals that the spherical domains are elongated at the entrance of the capillary giving rise to a microfibrillar morphology which is related to the excellent rheological and mechanical properties of the blends.     

Gas-phase thermal decomposition of peroxy-N-butyryl nitrate

The gas-phase thermal decomposition rate of peroxy-n-butyryl nitrate (n-C₃H₇C(O)OONO₂, PnBN) has been measured at ambient temperature (296 K) and 1 atm of air relative to that of peroxyacetyl nitrate (CH₃C(O)OONO₂, PAN) using mixtures of PAN (14–19 ppb), PnBN (22–46 ppb), and nitric oxide (1.35–1.90 ppm). The PnBN/PAN decomposition rate ratio was 0.773 ± 0.030. This ratio, together with a literature value of 3.0 × 10^?4 s^?1 for the thermal decomposition rate of PAN at 296 K, yields a PnBN thermal decomposition rate of (2.32 ± 0.09) × 10^?4 s^?1. The results are briefly discussed by comparison with data for other peroxyacyl nitrates and with respect to the atmospheric persistence of PnBN. © 1994 John Wiley & Sons, Inc.     

General base catalysis in the decomposition of N-Cl-Valine in aqueous solution

This article analyzes the kinetics of the decomposition of N-Cl-Valine in aqueous solution, which is formed rapidly by chlorination of Valine with sodium hypochlorite. A general-base catalyzed process not yet described is reported. The experimental evidence shows two competitive decomposition paths: an unimolecular concerted fragmentation process (k = (1.8 ± 0.1) · 10^?4 s^?1 at 298 K) and the other one is an E2 elimination process whose importance increases with pH and depends on the nature and the concentration of the bases present in the medium. © 1994 John Wiley & Sons, Inc.     

Resolution of binary mixtures of cephalothin and clavulanic acid by using first derivative spectrophotometry

First-derivative spectrophotometric method with a “zero-crossing” technique of measurement has been used for the quantification of two-components mixtures of cephalothin and clavulanic acid. As the absorption bands of these drugs overlap, both direct and derivative spectrophotometric methods have been investigated and evaluated by a rigorous statistical analysis of the experimental data. The first-derivative spectrophotometric method was found to be more accurate, direct and reproducible. Beer's law was valid over the concentration range 2.0–28.0 mg/l for both compounds. The detection limits of cephalothin and clavulanic acid, at a 0.05 level of significance, were calculated to be 0.13 and 0.15 mg/l. The method was applied for determining these antibiotics in mixtures, some of them containing inject-able dosage forms of cephalothin, and so to determine both compounds in saline and glucosed physiological sera.     

Synthesis and Crystal Structure of Di-n-butyltin(IV) Complex with 2-Oxo-propionic Acid (4-Pyridinecarbonyl) Hydrazone

Introduction The studies of diorganotin(IV) complexes are of current interest owing to their wide range of applica-tions such as biocides and homogeneous catalysts in industry.1 In recent years there have been more and more reports on the synthesis, antitumour activities and structural elucidation of various diorganotin(IV) deriva-tives of carboxylic acid.2-5 In particular, people take considerable interest in structural studies of diorgano-tin(IV) complexes of carboxylic acid, because there…