Substituent effects on indium-phosphorus bonding in (4-RC6H4S)3In.PR'3 adducts (R = H, Me, F; R' = Et, Cy, Ph): a spectroscopic, structural, and thermal decomposition study

The tris(arylthiolate)indium(III) complexes (4-RC(6)H(4)S)(3)In [R = H (5), Me (6), F (7)] were prepared from the 2:3 reaction of elemental indium and the corresponding aryl disulfide in methanol. Reaction of 5-7 with 2 equiv of the appropriate triorganylphosphine in benzene or toluene resulted in isolation of the indium-phosphine adduct series (4-RC(6)H(4)S)(3)In.PR'(3) [R = H, R' = Et (5a), Cy (5b), Ph (5c); R = Me, R' = Et (6a), Cy (6b), Ph (6c); R = F, R' = Et (7a), Cy (7b), Ph (7c)]. These compounds were characterized via elemental analysis, FT-IR, FT-Raman, solution (1)H, (13)C{(1)H}, (31)P{(1)H}, and (19)F (7a-c) NMR spectroscopy, and X-ray crystallography (5c, 6a, 6c, and 7a). NMR spectra show retention of the In-P bond in benzene-d(6) solution, with phosphine (31)P{(1)H} signals shifted downfield compared to the uncoordinated ligand. The X-ray structures show monomeric 1:1 adduct complexes in all cases. The In-P bond distance [2.5863(5)-2.6493(12) A] is influenced significantly by the phosphine substituents but is unaffected by the substituted phenylthiolate ligand. Relatively low melting points (88-130 degrees C) are observed for all adducts, while high-temperature thermal decomposition is observed for the indium thiolate reactants 5-7. DSC/TGA and EI-MS data show a two-step thermal decomposition process, involving an initial loss of the phosphine moiety followed by loss of thiolate ligand.     

Multi-class pesticide analysis in human hair by gas chromatography tandem (triple quadrupole) mass spectrometry with solid phase microextraction and liquid injection

A method for the simultaneous detection and quantification of 22 pesticides from different chemical classes was developed using solid-phase microextraction (SPME) and gas chromatography tandem (triple quadrupole) mass spectrometry. Pesticides were extracted from 50 mg of pulverized hair with acetonitrile. The extract was submitted to two successive steps of direct immersion-SPME at 30 °C and 90 °C or to a liquid injection without SPME in order to obtain optimized conditions for each of the 22 analytes investigated. Validation parameters were significantly influenced by both the injection mode (SPME vs liquid injection) and the temperature of SPME. Limits of quantification ranged from 0.05 pg mg⁻¹ for trifluralin to 10 pg mg⁻¹ for pentachlorophenol. The application of the validated method to the analysis of samples collected from non-occupationally exposed volunteers demonstrated the presence of pesticides in all the samples tested. Altogether, 13 different analytes were detected at concentration above the limit of quantification.     

Bis-imine primary amine protection of the dialkyltriamine,norspermidine

This Letter details the particular use of salicylaldehyde (2-hydroxybenzaldehyde) for the regiospecific protection of primary amines in a representative polyamine, norspermidine (N-(3-aminopropyl)propane-1,3-diamine) under mild reaction conditions in high yield. The lack of intramolecular hexahydropyrimidine formation allowed for subsequent N²-acylation and N²-alkylation reactions, typical of polyamine synthetic strategies.     

Preferred bonding motif for indium aminoethanethiolate complexes: structural characterization of (Me2NCH2CH2S)2InX/SR (X = Cl, I; R = 4-MeC6H4, 4-MeOC6H4)

The metathesis reaction of InCl3 with Me2NCH2CH2SNa or the redox reaction of indium metal with elemental iodine and the disulfide (Me2NCH2CH2S)2 yield the indium bis(thiolate) complexes (Me2NCH2CH2S)2InX [X = Cl (3) and I (4)], respectively. Compounds 3 and 4 may be further reacted with the appropriate sodium thiolate salts to afford the heteroleptic tris(thiolate) complexes (Me2NCH2CH2S)2InSR [R = 4-MeC6H4 (5), 4-MeOC6H4 (6), and Pr (7)]. Reaction of 2,6-Me2C6H3SNa with 4 affords (Me2NCH2CH2S)2InS(2,6-Me2C6H3) (8), while no reaction is observed with 3, suggesting a greater reactivity for 4. All isolated compounds were characterized by elemental analysis, melting point, and Fourier transform IR and 1H and 13C{1H} NMR spectroscopies. X-ray crystallographic analyses of 3-6 show a bicyclic arrangement and a distorted trigonal-bipyramidal geometry for In in all cases. The two sulfur and one halogen (3 and 4) or three sulfur (5 and 6) atoms occupy equatorial positions, while the nitrogen atoms of the chelating (dimethylamino)ethanethiolate ligands occupy the axial positions. The metric parameters of the (Me2NCH2CH2S)2In framework were found to change minimally upon variation of the X/SR ligand, while the solubility of the corresponding compounds in organic solvents varied greatly. 1H NMR studies in D2O showed that 6 and 7 react slowly with an excess of the tripeptide l-glutathione and that the rate of reaction is affected by the pendant thiolate ligand -SR.     

FTIR, SEM and fractal dimension characterization of lipase B from Candida antarctica immobilized onto titania at selected conditions

Lipase B from Candida Antarctica (also known as Candida antarctica lipase B or CALB) was immobilized onto titanium dioxide (TiO₂) in a buffer-free, bidistilled aqueous medium. The adsorption isotherm was determined by UV-vis analysis of supernatant solution at 280 nm, revealing that in 7 h 98% of the theoretical lipase monolayer on the TiO₂ (with 45.7 m²/g BET area) was achieved.Samples withdrawn from the supernatant immobilization medium were analyzed by Fourier-transform infrared spectroscopy in the 1700-1600 cm⁻¹ range (where the Amide I Proteins band appears) in order to obtain quantitative information on the evolution of the secondary-structure elements of the protein. The analysis performed revealed that lipase conformation suffers only minor changes during its adsorption onto TiO₂. However, water associated to the lipase may interact of several ways with the surface of the hydrated oxide.Characterization of the immobilized biocatalyst (CALB/TiO₂) implied SEM, fractal dimension analysis and FTIR techniques. A proposal of lipase-hydrated oxide interaction is presented.     

BSDE with quadratic growth and unbounded terminal value

In this paper, we study the existence of solution to BSDE with quadratic growth and unbounded terminal value. The main idea consists in using a localization procedure together with a priori bounds.     

Microcalorimetric study of the binding of methotrexate and its metabolites to thymidylate synthase

Direct microcalorimetric measurements allow determination of both the δH and association constant of biological complexes ifK _a value does not exceed 10⁶ M ^?1. For higherK _a values, δH can obviously be determined; this paper describes an original microcalorimetric method that permits determination of such high association constants. This method is based on the analysis of the competitive effect between two ligands having the same binding site in their receptor. As an example, the affinity constant for thymidylate synthase of a novel antifolate, CB 3717. was found to be 1.4 · 10⁷ M ^?1 using methotrexate polyglutamate MTX-G2 (K _a=2.3·10⁵ M ^?1) as competitor.     

Selective oxidation of anthracene to 9,10-anthraquinone over silica supported vanadium catalyst

The inner-ring oxidation of anthracene over V₂O₅/SiO₂ catalyst was investigated at various oxygen concentrations, contact times of the reactants and reaction temperatures. Up to 90 % yield to 9,10-anthraquinone is obtained at 218-220^oC.     

Chemical modifications of Au/SiO2 template substrates for patterned biofunctional surfaces

The aim of this work was to create patterned surfaces for localized and specific biochemical recognition. For this purpose, we have developed a protocol for orthogonal and material-selective surface modifications of microfabricated patterned surfaces composed of SiO(2) areas (100 μm diameter) surrounded by Au. The SiO(2) spots were chemically modified by a sequence of reactions (silanization using an amine-terminated silane (APTES), followed by amine coupling of a biotin analogue and biospecific recognition) to achieve efficient immobilization of streptavidin in a functional form. The surrounding Au was rendered inert to protein adsorption by modification by HS(CH(2))(10)CONH(CH(2))(2)(OCH(2)CH(2))(7)OH (thiol-OEG). The surface modification protocol was developed by testing separately homogeneous SiO(2) and Au surfaces, to obtain the two following results: (i) SiO(2) surfaces which allowed the grafting of streptavidin, and subsequent immobilization of biotinylated antibodies, and (ii) Au surfaces showing almost no affinity for the same streptavidin and antibody solutions. The surface interactions were monitored by quartz crystal microbalance with dissipation monitoring (QCM-D), and chemical analyses were performed by polarization modulation-reflexion absorption infrared spectroscopy (PM-RAIRS) and X-ray photoelectron spectroscopy (XPS) to assess the validity of the initial orthogonal assembly of APTES and thiol-OEG. Eventually, microscopy imaging of the modified Au/SiO(2) patterned substrates validated the specific binding of streptavidin on the SiO(2)/APTES areas, as well as the subsequent binding of biotinylated anti-rIgG and further detection of fluorescent rIgG on the functionalized SiO(2) areas. These results demonstrate a successful protocol for the preparation of patterned biofunctional surfaces, based on microfabricated Au/SiO(2) templates and supported by careful surface analysis. The strong immobilization of the biomolecules resulting from the described protocol is advantageous in particular for micropatterned substrates for cell-surface interactions.     

Eigenmode structure in solar-wind Langmuir waves

We show that observed spatial- and frequency-domain signatures of intense solar-wind Langmuir waves can be described as eigenmodes trapped in a parabolic density well. Measured solar-wind electric field spectra and waveforms are compared with 1D linear solutions and, in many cases, can be represented by 1-3 low-order eigenstates. To our knowledge, this report is the first observational confirmation of Langmuir eigenmodes in space. These results suggest that linear eigenmodes may be the starting point of the nonlinear evolution, critical for producing solar type II and type III radio bursts.