Nonlinear vibration isolation via an innovative active bionic variable stiffness adapter (ABVSA)

Nonlinear Dynamics - During the process of spacecraft launch, the extreme vibration environment is the major influence factor that induces the failure of the mission. Inspired by the smooth motions...     

Ab initio study on the reaction of Y+ + NH3 → Y+ NH + H2

The reaction of Y⁺ + NH₃ → Y⁺ NH + H₂ was theoretically investigated by ab initio MO methods. Two possible pathways (1–1 H₂ loss and 1–2 H₂ loss) on the singlet potential energy surface and reaction mechanism were examined and discussed. The singlet and triplet PESs of this reaction system were compared to confirm the correctness of spin conservation concepts. © 1996 John Wiley & Sons, Inc.     

Syndioselective propylene polymerizations by ansa-zirconocenium catalyst

The effect of reaction conditions, including catalyst concentration, temperature, and immobilization on support, have been investigated for syndioselective propylene polymerization by the “bare” zirconocenium ion generated from 1,1-diphenyl-methylidene(1-η⁵-cyclopentadienyl)(9-η⁵-fluorenyl)zirconium-dichloride precursor (2). Neither variation of the catalyst concentration nor immobilization of 2 on silica support affect the syndiospecificity of polymerization. The stereoregularity of the syndiotactic polypropylene, as judged from the melting transition temperature and homosteric r-pentad population by ¹³C-NMR, were found to be proportional to polymer molecular weight. These behaviors are compared with a typical isoselective catalyst ethylenebis(4,5,6,7-tetrahydroindenyl) Zr precursor (4). They are in close resemblance in the case of the S-enantiomeric complex of 4, but the racemic mixture of 4 is markedly inferior. The origins of stereo- and regio-errors are discussed. © 1996 John Wiley & Sons, Inc.     

Synthesis of Lanthanide–Alkylaluminium Bimetallic Complexes and Studies on Their Catalytic Activities for Polymerization of Some Polar Monomers

Three new lanthanide (Ln)–alkylaluminium (Al) bimetallic complexes with the formula [(μ-CF₃CO₂)₂Ln(μ-CF₃CHO₂)AlR₂ · 2THF]₂ (Ln=Nd, Y, R=i-C₄H₉ (i-Bu); Ln=Eu, R=C₂H₅(Et); THF=tetrahydrofuran) were synthesized by the reaction of Ln(CF₃CO₂)₃ (Ln=Nd, Y) with HAl (i-Bu)₂ and of Eu(CF₃CO₂)₃ with AlEt₃, respectively. Their crystal structures were determined by X-ray diffraction at 233 K. [(μ-CF₃CO₂)₂Nd (μ-CF₃CHO₂)Al(i-Bu)₂ · 2THF]₂ (Nd–Al) and [(μ-CF₃CO₂)₂Y(μ-CF₃CHO₂)Al(i- Bu)₂ · 2THF]₂ (Y–Al) are isomorphous and crystallize in space group P 1 with a =12.441(3) Å [12.347(5) Å for Y–Al], b =12.832(3) Å [12.832(4) Å], c =11.334(3) Å [11.292(8) Å], α=104.93 (2)° [104.45(4)°], β=98.47(2)° [98.81(4)°], γ=64.60(2)° [64.30(3)°], R =0.519 [0.113], R _w=0.0532 [0.110], Z =1 and [(μ-CF₃CO₂)₂Eu(CF₃ CHO₂)AlEt₂ · 2THF]₂(Eu–Al) in space group P 2₁/ n with a =11.913(6) Å, b =14.051(9) Å, c =17.920(9) Å, α=101.88(11)°, β=γ=90°, R =0.0509, R _w=0.0471 and Z =2. The six CF₃CO     

Effect of Cu Ions on the Dipole Moments and Polarization of Strontium Barium Niobate Single Crystals

The crystal growth, the ferroelectric hysteresis loops, and the infrared reflectivity spectra of coppermodified strontium barium niobate (SBN) single crystals are reported. Compared with the undoped SBN crystals, the copper-modified crystals have stable hysteresis loops, the spontaneous polarization of which is about 0.30 C/m², but that of the undoped SBN crystals is only about 0.12 C/m². Their coercive field strength is all about 340 V/mm. The experimental results of the infrared spectra show that the infrared reflectivities vary as the orientations of the dipole moments owing to the copper-doping. The c-axis becomes the most stable orientation of the dipole moments, and the polarization will be locked and won't recede if the copper-modified crystals are polarized into monodomains.     

Facilely prepared aggregation-induced emission (AIE) nanocrystals with deep-red emission for super-resolution imaging

Organic nanocrystals (NCs) with high brightness are highly desirable for biological imaging. However, the preparation of NCs by a facile and fast method is still challenging. Herein, an aggregation-induced emission (AIE) luminogen of 4,4′-(5,6-difluorobenzo[c][1,2,5]thiadiazole-4,7-diyl)bis(N,N-bis(4-methoxyphenyl)aniline) (DTPA-BT-F) in the deep-red region is designed with intensive crystalline features to obtain NCs by kinetically controlled nanoprecipitation. The prepared AIE NCs with high brightness and good photo-stability are then applied in super-resolution imaging via stimulated emission depletion (STED) nanoscopy. As observed, the nanostructures in lysosomes of both fixed and live cells are well visualized with superior lateral resolutions under STED nanoscopy (full width at half maximum values, 107 and 108 nm) in contrast to that in confocal imaging (548 and 740 nm). More importantly, dynamic monitoring and long-term tracking of lysosomal movements in live HeLa cells, such as lysosomal contact, can also be carried out by using DTPA-BT-F NCs at a superior resolution. To the best of our knowledge, this is the first case of AIE NCs prepared by nanoprecipitation for STED nanoscopy, thus providing a new strategy to develop high performance imaging agents for super-resolution imaging.

AIE nanocrystals with high brightness in the deep-red region were facilely prepared by kinetically controlled nanoprecipitation. These nanocrystals were then applied in super-resolution cellular imaging via STED nanoscopy.     

Magnetron sputtering deposition of silicon nitride on polyimide separator for high-temperature lithium-ion batteries

To date,lithium-ion batteries are becoming increasingly significant in the application of portable devices and electrical vehicles,and revolutionary progress in theoretical research and industrial application has been achieved.However,the commercial polyolefin separators with unsatisfying electrolytes affinity and poor thermal stability have extremely restricted the further application of lithium-ion batteries,especially in the high-temperature fields.In this work,magnetron sputtering deposition technique is employed to modify the commercial polyimide separator by coating silicon nitride on both sides.Magnetron sputtering deposition modified polyimide(MSD-PI)composite separator shows high thermal stability and ionic conductivity.More importantly,compared with the cells using Celgard separator,the cells with MSD-PI separator exhibit superior electrochemical performance,especially long-term cycle performance under high temperature environment,owing to the high thermal conductivity of surface Si3 N4 particles.Hence,lithium-ion batteries with MSD-PI separator are capable of improving thermal safety and capacity retention,which demonstrates that magnetron sputtering deposition technique could be regarded as a promising strategy to develop advanced organic/inorganic composite separators for high-temperature lithium-ion batteries.     

低偏振相关损耗全息光栅波分复用器的设计

对基于掺杂铌酸锂材料的体光栅波分复用器主要结构和光栅记录参量提出了一种优化设计方法.采用严格耦合波理论,对两种偏振不同入射角和不同记录晶体厚度下的器件关键性能参量,如插入损耗和偏振相关损耗等进行了优化.数值结果证明采用优化设计的晶体厚度和光栅记录时的入射角,在获得相当低的偏振相关损耗的同时,也能够获得较低的插入损耗,实现了综合性能优化的波分复用器设计.实验结果证明用优化设计的参量能有效降低波分复用器件的插入损耗和偏振相关损耗.     

多光束在分形粗糙表面散射的仿真

采用矩量法(MOM),分析了多光束在分形粗糙导体表面的散射分布.对在不同入射角、光束宽度控制因子、光束照射区宽度、表面均方根高度和表面分维数情况下的散射进行了数值仿真.仿真结果表明了各参量的变化对散射分布的影响.根据仿真计算结果给出了最佳的散射测量区域,为减少多光束测量的误差提供了一定的参考.     

The role of cooling rate in crystallization-driven block copolymer self-assembly

Self-assembly of crystalline-coil block copolymers (BCPs) in selective solvents is often carried out by heating the mixture until the sample appears to dissolve and then allowing the solution to cool back to room temperature. In self-seeding experiments, some crystallites persist during sample annealing and nucleate the growth of core-crystalline micelles upon cooling. There is evidence in the literature that the nature of the self-assembled structures formed is independent of the annealing time at a particular temperature. There are, however, no systematic studies of how the rate of cooling affects self-assembly. We examine three systems based upon poly(ferrocenyldimethylsilane) BCPs that generated uniform micelles under typical conditions where cooling took pace on the 1–2 h time scale. For example, several of the systems generated elongated 1D micelles of uniform length under these slow cooling conditions. When subjected to rapid cooling (on the time scale of a few minutes or faster), branched structures were obtained. Variation of the cooling rate led to a variation in the size and degree of branching of some of the structures examined. These changes can be explained in terms of the high degree of supersaturation that occurs when unimer solutions at high temperature are suddenly cooled. Enhanced nucleation, seed aggregation, and selective growth of the species of lowest solubility contribute to branching. Cooling rate becomes another tool for manipulating crystallization-driven self-assembly and controlling micelle morphologies.

In the self-assembly of crystalline-coil block copolymers in solution, heating followed by different cooling rates can lead to different structures.