氦氩射频容性放电发射光谱分析

光抽运亚稳态稀有气体激光器利用放电等离子体作为激光的增益介质.为掌握容性射频放电的放电参数对等离子体各项参数的影响的基本规律,利用等离子体发射光谱法研究了氦氩混合气体在不同装置、不同Ar组分、不同气压和不同射频注入功率下的等离子体参数.利用残留水蒸气产生的OH自由基A~2Σ~+→X~2Π的转动光谱分析获得气体温度;利用电子态光谱的玻尔兹曼做图法获得电子激发温度,利用Ar原子696.5 nm谱线的斯塔克展宽获得电子密度.结果表明:气体温度随气压增加略微上升,在一个大气压下改变组分和放电功率,气体温度变化不大;电子激发温度随总气压的下降而上升,且随着Ar组分的增加而略微下降;目前放电条件下的电子密度均在10~(15)cm~(-3)量级;长时间放电监测表明,残留的水蒸气会导致电子温度的下降,从而降低Ar亚稳态的产率.     

Role of Bi ions for Er ions efficient 1.54 μm light emission in Er/Bi codoped SiO2 thin film prepared by sol-gel method

Er/Bi codoped SiO₂ thin films were prepared by sol-gel method and spin-on technology with subsequent annealing process. The bismuth silicate crystal phase appeared at low annealing temperature while vanished as annealing temperature exceeded 1000 °C, characterized by X-ray diffraction, and Rutherford backscattering measurements well explained the structure change of the films, which was due to the decrease of bismuth concentration. Fine structures of the Er³⁺-related 1.54 μm light emission (line width less than 7 nm) at room temperature was observed by photoluminescence (PL) measurement. The PL intensity at 1.54 μm reached maximum at 800 °C and decreased dramatically at 1000 °C. The PL dependent annealing temperature was studied and suggested a clear link with bismuth silicate phase. Excitation spectrum measurements further reveal the role of Bi³⁺ ions for Er³⁺ ions near infrared light emission. Through sol-gel method and thermal treatment, Bi³⁺ ions can provide a perfect environment for Er³⁺ ion light emission by forming Er-Bi-Si-O complex. Furthermore, energy transfer from Bi³⁺ ions to Er³⁺ ions is evidenced and found to be a more efficient way for Er³⁺ ions near infrared emission. This makes the Bi³⁺ ions doped material a promising application for future erbium-doped waveguide amplifier and infrared LED.     

A density functional theory study of CH4 dehydrogenation on Co(1 1 1)

The dehydrogenation of CH₄ on the Co(1 1 1) surface is studied using density functional theory calculation (DFT). It is found that CH₄ is favored to dissociate to CH₃ and then transforms to CH₂ and CH by sequential dehydrogenation, and CH₄ activation into CH₃ and H is the rate-determining step on the Co(1 1 1) surface. CH₂ is quite unstable on Co(1 1 1) surface. CH dehydrogenation into C and H is difficult. CH₃ and H prefer to adsorb on 3-fold hollow hcp and fcc sites, and CH₂, CH and C prefer to adsorb on hcp sites.     

Investigation of magnetic properties for oblique deposited granular films by magnetic field annealing

A series of (Fe₅₇Co₂₄Ni₄Nb₂B₁₃)_x-(SiO₂)_1−x nano-granular thin films were fabricated by magnetron sputtering with different oblique incidence angle θ and excellent soft magnetic properties are achieved. Based on the results of magnetic field anneal at different temperature T_a, it is evidenced that orientation of atomic pairs contributes to the annealing treatment, and could manipulate magnetic anisotropy. The damping coefficient α decreases with increasing angle θ and this is ascribed to the anisotropy dissipation.     

Deposition of Ag nanostructures on TiO2 thin films by RF magnetron sputtering

Ag nanostructures on TiO₂ films were deposited by RF magnetron sputtering under variable deposition parameters, such as DC potential, RF-power and total pressure. The concentration, shape, and distribution of the deposited nanostructures and continuous Ag films on thin films of TiO₂ can be tailored by careful variation of the deposition parameters. Controllable clusterlike, islandlike and film Ag structures on TiO₂ film were obtained, respectively. DC potential was found as an appropriate parameter to tailor the change of Ag nanostructure and the overall Ag amount. The compositions, nanostructures and morphologies of nanocomposite films appreciably influence the optical response.     

Diode-pumped passively Q-switched and mode-locked Nd:GGG laser at 1.3 μm with V<Superscript>3+</Superscript>:YAG saturable absorber

Using V³⁺:YAG crystal as the saturable absorber, a diode-pumped passively Q-switched and mode-locked Nd:GGG laser operating at 1.3 μm is realized for the first time. The mode-locking modulation depth of nearly 100% has been achieved. The maximum output power and the single Q-switched pulse energy are 410 mW and 8.3 μJ. The mode-locked pulse inside the Q-switched pulse has a repetition rate of 349 MHz, and its average pulse width is estimated to be about 750 ps.     

Progress of Jinping Underground laboratory for Nuclear Astrophysics (JUNA)

Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of~(25)Mg(p,γ)~(26)Al,~(19)F(p,α)~(16)O,~(13)C(α,n)~(16)O and ~(12)C(α,γ)~(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.     

同位旋非对称核物质状态方程

为了确定同位旋非对称核物质状态方程,利用同位旋有关的量子分子动力学理论计算和寻找实验上对于中能重离子碰撞中核子-核子碰撞截面或者对称势非常灵敏的物理观测量——探针.结果发现了几种分别对于核子-核子碰撞截面或者对称势非常灵敏的物理观测量.并对这些探针的机理进行了仔细研究,对以上研究结果进行小结和讨论,并为今后继续深入研究工作提出展望. 关键词： 对称势 核子-核子碰撞截面 同位旋依赖性 机理     

LaAlO3衬底高温超导线性相位滤波器

报道了带宽为10 MHz,80%以上带宽内群时延失真小于20 ns的高温超导线性相位滤波器.该滤波器制作于LaAlO3衬底上,采用了一种新的谐振器结构以消除寄生耦合的影响,使得滤波器不仅具有很好的线性相位特性,而且具有对称的幅频响应特性.滤波器实测带宽为9.85 MHz,回波损耗约16 dB,带外抑制大于80 dB,群时延失真(80%以上带宽内)约20 ns,其他实测指标也与仿真结果符合很好.     

光纤中的拉曼效应

在液芯光纤内产生拉曼效应,可以增强自发拉曼、共振拉曼光谱强度10^3倍;降低受激拉曼光谱荫值功率为10^-1．光纤内拉曼效应在科学研究和教学方面都有广泛应用．