Impact of fluorine on the phase behavior of bis-p-tolyl propane in supercritical CO2, 1,1-difluoroethane,and 1,1,1,2-tetrafluoroethane

Fluorine substitution on a solute can have a significant effect on solute solubility in a given solvent and fluorine substitution on a solvent can also have a significant effect on solvent quality. The effect of fluorine is demonstrated with the phase behavior data for bis(p-tolyl)propane (BTP) compared to bis(p-tolyl)hexafluoropropane (BTHFP) in supercritical carbon dioxide, 1,1-difluoroethane (F152a), and 1,1,1,2-tetrafluoroethane (F134a). Semifluorinated BTHFP is more soluble than non-fluorinated BTP in all three solvents, especially CO₂. The CO₂–BTP system exhibits solid solubility behavior while the CO₂–BTHFP system exhibits liquid–liquid–vapor (LLV) behavior near the critical point of CO₂. Although the two dipolar hydrofluorocarbons (HFC) are better solvents than CO₂ for these two aromatic solid compounds, F152a is the superior HFC solvent, especially for BTP, because F152a has a smaller molar volume and a larger effective dipole moment than F134a. LLV behavior is also observed for the F134a–BTP system near the critical point of F134a although the F134a–BTHFP, F152a–BTP, and F152a–BTHFP systems all appear to exhibit type-I phase behavior and no liquid–liquid immiscibility near the respective critical points.     

High-pressure vapor–liquid and vapor–liquid–liquid equilibria in the carbon dioxide + 1-heptanol system

Vapor–liquid equilibria (VLE) and vapor–liquid–liquid equilibria (VLLE) data for the carbon dioxide + 1-heptanol system were measured at 293.15, 303.15, 313.15, 333.15 and 353.15 K. Phase behavior measurements were made in a high-pressure visual cell with variable volume, based on the static-analytic method. The pressure range under investigation was between 0.58 and 14.02 MPa. The Soave–Redlich–Kwong (SRK)-EOS coupled with Huron–Vidal (HV) mixing rules and a reduced UNIQUAC model, was used in a semi-predictive approach, in order to represent the complex phase behavior (critical curve, LLV line, isothermal VLE, LLE, and VLLE) of the system. The topology of phase behavior is qualitatively correct predicted.     

Comparative study on different carbon nanotube materials in terms of transparent conductive coatings

We compared conductive transparent carbon nanotube coatings on glass substrates made of differently produced single-wall (SWNT), double-wall, and multiwall carbon nanotubes. The airbrushing approach and the vacuum filtration method were utilized for the fabrication of carbon nanotube films. The optoelectronic performance of the carbon nanotube film was found to strongly depend on many effects including the ratio of metallic-to-semiconducting tubes, dispersion, length, diameter, chirality, wall number, structural defects, and the properties of substrates. The electronic transportability and optical properties of the SWNT network can be significantly altered by chemical doping with thionyl chloride. Hall effect measurements revealed that all of these thin carbon nanotube films are of p-type probably due to the acid reflux-based purification and atmospheric impurities. The competition between variable-range hoping and fluctuation-assisted tunneling in the functionized carbon nanotube system could lead to a crossover behavior in the temperature dependence of the network resistance.     

Effect of chain density and conformation on protein adsorption at PEG-grafted polyurethane surfaces

Polyurethanes were modified using monobenzyloxy polyethylene glycol (BPEG) which possesses a bulky hydrophobic benzyloxy group at one end and a hydroxyl group at the other end as a preconstructed BPEG layer, and poly(ethylene glycol) (PEG) and monomethoxyl poly(ethylene glycol) (MPEG) with various chain lengths as fillers. Our objective was to investigate the effect of PEG graft density and conformation on protein adsorption at PEGlated surface. The graft density was estimated by a chemical titration method. The combination of ATR-FTIR, AFM and titration results provide evidences that the graft density can be increased by backfilling PEG or MPEG to a BPEG layer. However, fibrinogen and albumin adsorption significantly increased on all surfaces after PEG or MPEG backfilling. We conclude that the conformation of hydrophobic benzyloxy end groups of the BPEG layer plays a key role. The benzyloxy end groups of preconstructed PEG chains stretch to the surface after PEG backfilling, which possibly accounts for the observed increase in protein adsorption. The BPEG conformation change after backfilling with PEG or MPEG was also suggested by contact angles. Additionally, protein adsorption was slightly influenced by the length of filler, suggesting a change in surface morphology.     

Disulfide bond creates a small connecting loop in aminoxy peptide backbone

Disulfide-bond formation between the side chains of cysteine-cysteine pairs is often critical to the folding behavior, stability, and functionality of proteins. In this paper, we report that sulfur atoms can be introduced into the amide groups of aminoxy peptides to form a novel type of disulfide bridge, which creates a connecting loop in the peptide backbone.     

Optical properties of ultrashort semiconducting single-walled carbon nanotube capsules down to sub-10 nm

Single-walled carbon nanotubes (SWNTs) are typically long (greater than or approximately equal 100 nm) and have been well established as novel quasi one-dimensional systems with interesting electrical, mechanical, and optical properties. Here, quasi zero-dimensional SWNTs with finite lengths down to the molecular scale (7.5 nm in average) were obtained by length separation using a density gradient ultracentrifugation method. Different sedimentation rates of nanotubes with different lengths in a density gradient were taken advantage of to sort SWNTs according to length. Optical experiments on the SWNT fractions revealed that the UV-vis-NIR absorption and photoluminescence peaks of the ultrashort SWNTs blue-shift up to approximately 30 meV compared to long nanotubes, owing to quantum confinement effects along the length of ultrashort SWNTs. These nanotube capsules essentially correspond to SWNT quantum dots.     

Porous carbon and carbon/metal oxide microfibers with well-controlled pore structure and interface

A "brick-and-mortar" assembly approach for creating porous carbon and carbon/metal oxide fibers on the micron scale with well-defined pore structure and interface is presented. A series of monodisperse silica@polyacrylonitrile (PAN) and silica@metal oxide@PAN core/shell particles were synthesized by emulsion polymerization and assembled into organic-inorganic composite fibers through a simple ice-templating strategy with the assistance of polyvinyl alcohol. Porous carbon and carbon/metal oxide fibers with well-controlled pores and interfaces were created by oxidative stabilization and carbonization of composite fibers followed by removal of silica cores with hydrofluoric acid or concentrated alkali. The pore structure and the carbon/metal oxide interfaces of the fibers impart to the fibers' lightweight and potential applications in catalysis, electrochemical energy, and gas or liquid separations and storage.     

Antigen synthetic strategy and immunoassay development for detection of acrylamide in foods

Acrylamide, a toxic and carcinogenic compound, has been found to be present in a range of processed starchy foods. To prepare an effective immunogen compound for acrylamide, N-acryloxysuccinimide (NAS) was conjugated to bovine serum albumin (BSA) at a high molar ratio of 21.2:1. Antisera were obtained by immunization of rabbits with additional booster injections of the NAS-BSA conjugate after the regular process. The IgGs purified by an ammonium sulfate precipitation method were further fractionated with a BSA-immobilized immunoaffinity column. The affinity constant between the collected antibody and coated antigen (NAS-ovalbumin) is found to be 6.7 x 10(7) L mol(-1). Asparagine, the key precursor of acrylamide formation in foods, showed negligible cross-reactivity to the antibody. A biotin-avidin enzyme-linked immunosorbent assay (BA-ELISA) was developed and the optimum assay medium was found to be 0.1 mol L(-1) NaHCO(3) (pH 8.3, containing 0.5 mol L(-1) NaCl). The BA-ELISA afforded a practical sensitivity with a working range of 10-100,000 ng mL(-1) and a detection limit of 6 ng mL(-1). The assay was applied to detect acrylamide in potato fries and biscuits and the quantitative results were in good agreement with those obtained by the high-performance liquid chromatography method. This immunoassay will be very useful for monitoring acrylamide in food samples.     

Constituents from Leaves of Scolopia chinensis

Two new phenolic glycosides, scolochinenosides A and B ( 1 and 2 ), and a new flavonoid glycoside, scoloside A ( 3 ), were isolated from the leaves of Scolopia chinensis (Lour .) Clos , together with eight known compounds. The structures of the new compounds were established on the basis of chemical and spectroscopic evidences.     

Mixed-valence Cu(II)Cu(I)15I17 cluster builds up a 3D metal-organic framework with paramagnetic and thermochromic characteristics

Four cubane-like Cu4I4 units are assembled around an iodine atom to form the giant, mixed-valent Cu(II)Cu(I)15I17 cluster. The Cu(II)Cu(I)15I17 cluster and a bipyrazole linker form a 3D open framework with paramagnetic and thermochromic properties. This paper also touches on the resemblance of this cluster to the self-similar object of a Sierpinski tetrahedron.