Temperature-insensitive fiber Bragg grating dynamic pressure sensing system

Temperature-insensitive dynamic pressure measurement using a single fiber Bragg grating (FBG) based on reflection spectrum bandwidth modulation and optical power detection is proposed. A specifically designed double-hole cantilever beam is used to provide a pressure-induced axial strain gradient along the sensing FBG and is also used to modulate the reflection bandwidth of the grating. The bandwidth modulation is immune to spatially uniform temperature effects, and the pressure can be unambiguously determined by measuring the reflected optical power, avoiding the complex wavelength interrogation system. The system acquisition time is up to 85 Hz for dynamic pressure measurement, and the thermal fluctuation is kept less than 1.2% full-scale for a temperature range of -10 degrees C to 80 degrees C.     

单晶金刚石氢终端场效应晶体管特性

基于微波等离子体化学气相淀积生长的单晶金刚石制作了栅长为2μm的耗尽型氢终端金刚石场效应晶体管,并对器件特性进行了分析.器件的饱和漏电流在栅压为-6 V时达到了96 mA/mm,但是在-6 V时栅泄漏电流过大.在-3.5 V的安全工作栅压下,饱和漏电流达到了77 mA/mm.在器件的饱和区,宽5.9 V的栅电压范围内,跨导随着栅电压的增加而近线性增大到30 mS/mm.通过对器件导通电阻和电容-电压特性的分析,氢终端单晶金刚石的二维空穴气浓度达到了1.99×10~(13)cm~(-2),并且迁移率和载流子浓度均随着栅压向正偏方向的移动而逐渐增大.分析认为,沟道中高密度的载流子、大的栅电容以及迁移率的逐渐增加是引起跨导在很大的栅压范围内近线性增加的原因.     

Strength and equation of state of molybdenum triboride under 80 GPa pressure,using radial X-ray diffraction

The strength and equation of state of molybdenum triboride have been determined under nonhydrostatic compression up to 80?GPa, using an angle-dispersive radial X-ray diffraction technique in a diamond anvil cell (DAC). The RXD data yield a bulk modulus and its pressure derivative as K_0?=?342(6)?GPa with K₀′?=?2.11(17) at ψ?=?54.7°. Analysis of diffraction data using the strain theory indicates that the ratio of differential stress to shear modulus (t/G) ranges from 0.002 to 0.050 at pressures of 4–80?GPa. Together with theoretical results on the high pressure shear modulus, our results here show that molybdenum triboride sample under uniaxial compression can support a differential stress of ～10?GPa when it started to yield with plastic deformation at ～30?GPa. In addition, we draw a conclusion that MoB₃ is not a superhard material but a hard material.     

Development of picosecond time‐resolved X‐ray absorption spectroscopy by high‐repetition‐rate laser pump/X‐ray probe at Beijing Synchrotron Radiation Facility

A new setup and commissioning of transient X‐ray absorption spectroscopy are described, based on the high‐repetition‐rate laser pump/X‐ray probe method, at the 1W2B wiggler beamline at the Beijing Synchrotron Radiation Facility. A high‐repetition‐rate and high‐power laser is incorporated into the setup with in‐house‐built avalanche photodiodes as detectors. A simple acquisition scheme was applied to obtain laser‐on and laser‐off signals simultaneously. The capability of picosecond transient X‐ray absorption spectroscopy measurement was demonstrated for a photo‐induced spin‐crossover iron complex in 6 mM solution with 155 kHz repetition rate.     

Critical Behavior of the Annealed Ising Model on Random Regular Graphs

In Giardinà et al. (ALEA Lat Am J Probab Math Stat 13(1):121–161, 2016), the authors have defined an annealed Ising model on random graphs and proved limit theorems for the magnetization of this model on some random graphs including random 2-regular graphs. Then in Can (Annealed limit theorems for the Ising model on random regular graphs, arXiv:1701.08639, 2017), we generalized their results to the class of all random regular graphs. In this paper, we study the critical behavior of this model. In particular, we determine the critical exponents and prove a non standard limit theorem stating that the magnetization scaled by \(n^{3/4}\) converges to a specific random variable, with n the number of vertices of random regular graphs.     

利用显微拉曼光谱技术鉴别印文形成时间的应用研究

采用激光显微拉曼光谱技术,选择10种不同品牌和型号的印泥(油)盖印印文的历时性样本,利用印文拉曼光谱中的1089 cm~(-1)和1235 cm~(-1)处特征峰的相对面积值(I)分析纸张、温度、热老化因素对印文形成时间的影响,探讨盖印时间与峰面积相对值(I)的关系。结果表明,I值随时间呈现规律性变化,尤其在近期内盖印印文的变化规律明显,适用于印文形成时间的鉴别,是一种准确、无损的检验方法。     

掺磷TiO_2优化TiO_2/MBA/Ag三明治结构的SERS性能

本文以磷酸为磷源,通过溶胶水热法制备磷掺杂TiO_2,利用Lee和Meisel的方法制备银溶胶,以4-巯基苯甲酸(MBA)为探针分子,通过构建TiO_2/MBA/Ag三明治结构,研究磷掺杂二氧化钛对该基底表面增强拉曼(SERS)性能的提升。通过TEM、XRD、XPS、DRS和拉曼光谱图表征二氧化钛的形貌结构、化学组成、光学和拉曼性能,结果表明,制备出的磷掺杂二氧化钛为锐钛矿型纳米颗粒,粒径范围6~12nm,XPS显示磷以P~(5+)替代了Ti~(4+),形成O-P-O键掺入TiO_2的晶格中,当磷的掺杂量在1.77%时,TiO_2/MBA/Ag三明治体系具有最佳的SERS信号,这是因为适量的磷掺杂降低了TiO_2的能带间隙,丰富TiO_2的表面态,这能促进TiO_2向MBA分子的电荷转移。     

光电振荡器中锁相环和注入锁定技术的比较和优化

分析比较了基于锁相环技术和基于注入锁定技术的两种光电振荡器的特性,推导了两种光电振荡器的噪声传递函数,并进行了实验验证,得出了这两种技术应用于光电振荡器的相似性和各自的优缺点.由于光纤对温度的高敏感性,采用这两种技术的光电振荡器都存在着易失锁的问题.为解决这一问题,分别分析了两种光电振荡器输出信号与参考信号间的相位关系,基于此关系设计了锁定状态监测和反馈系统,并实验验证了系统的有效性.     

含石墨烯二维金属结构中的自发辐射研究

研究原子在金属结构中的自发辐射时引入单层石墨烯薄膜,利用石墨烯特殊的光电特性来调控原子的自发辐射率.推导了局态密度与自发辐射率的格林函数表示形式,并结合频域有限差分方法进行了数值模拟.分析结果表明:随着化学势的增大,自发辐射波峰出现蓝移现象,且自发辐射率波峰得到增强,理论上实现了原子自发辐射率峰值位置与幅度的调制.研究结果可以为新型纳米器件及光电子设备的制造和优化提供参考.     

针对调频引信的窄带扫频式干扰优化方法

扫频式干扰是调频体制引信的主要威胁之一,但其干扰效果具有一定随机性。为了提高其干扰效率,在理论分析扫频式干扰作用下调频引信失效机理的基础上,提出了一种针对单通道调频多普勒引信的窄带扫频式干扰优化方法,可以获取最优的扫频频率步进点数,并依此进行非等间隔频率步进的窄带扫频式干扰。仿真与实测结果表明,该方法可以提高扫频式干扰的干扰效率,同时该方法也可以为成功干扰采用多通道等抗干扰措施的调频引信提供理论设计依据。